Vello FreeWave Fusion Wireless Flash Trigger & Remote Control for Canon SLR
- 2.4 GHz Reduced Interference Frequency
- Range Up to 100m
- Individual/Group Wireless Flash Trigger
- Up to 3 Light Groups/7 Grp Combinations
- Flash Sync Speed of Up to 1/320s
Email me when stock arrives
- Product: #33075
- SKU: RFW-C
The FreeWave Fusion Wireless Flash Trigger & Remote Control from Vello is a versatile, reliable remote control kit that will trigger off-camera flash units and studio lights from up to 100 m away. It can be used to configure up to three different light groups, which can be triggered individually or simultaneously, for a total of seven different combinations, using its multiple groups feature. Simultaneous triggering of multiple light groups requires additional FreeWave Fusion Receivers (available separately).
The FreeWave Fusion also provides the convenience of a wireless camera shutter release, ideal for photographing wildlife, and also for macro and close-up photos or long exposures, where the slightest camera movement can ruin a picture. Working on the 2.4 GHz frequency gives you reduced radio interference and an extended range (up to 100m)—you don't need to have line-of-sight alignment, either, as radio waves will pass through walls, windows and floors.
2.4GHz Radio Frequency
Reduced interference and improved wireless signal quality.
Range of up to 100m
Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger.
Configure up to three different light groups and up to seven different group combinations.
Flash Sync Speed of Up to 1/320s
Take advantage of sync speeds that match the rating of your camera all the way up to 1/320s (on compatible cameras only).
Simply depress the trigger button on the transmitter half-way to pull the flash out of "sleep-mode". Sleep mode allows the flash to power down in between shooting sessions to extend battery life. The wake-up function is only available when used as part of a complete Canon TTL system.
Note: If your flash does not have a wake-up function, you may be able to turn off sleep mode. Refer to your flash's manual for instructions.
One receiver works with multiple camera and light models. Just swap out the connecting cables.
Dual-Function Shutter Release Button
Press halfway to focus; press fully to trigger shutter.
Confirm pre-focus, shutter release, flash wake-up, and flash trigger in wireless mode.
Included Shutter Release Cables Support:
Canon EOS: Elan series, Digital Rebel (300D), XT (350D), XTi (400D), XSi (450D), T1i (500D), T2i (550D), T3 (1100D), T3i (600D), T4i (650D), T5 (1200D), T5i (700D), T6i (750D), T6s (760D), SL1 (100D) and XS (1000D), 60D & 70D 10D, 20D, 30D, 40D, 50D, 5D, 5D Mark II, 5D Mark III, 6D, 7D, 7D Mark II, 1D, 1D Mark II, 1D Mark II N, 1D Mark III, 1D Mark IV, 1Ds, 1Ds Mark II, 1Ds Mark III, 1D X and 1D C PowerShot G10, G11, G12, G15, G16 & G1 X; SX50, SX60
Contax: N and 645
Hasselblad: H series
Pentax: K10D, K20D, K100D, K110D, K200D, K-3, K-5, K-5 II, K-7, K30, K-50, K-500, *istDS, DS2, DS, DL2, DL, and D
Samsung: NX10 & NX100; GX-1S, GX-1L, GX-10 & GX-20
Sigma: SD1, SD9, SD10, SD14 & SD15* Optional shutter release cables are available to make the remote control function compatible with other brand camera models
|Range||100 m with no obstructions|
|Confirmation LEDs||2 Colour|
|Shutter Modes||Settings controlled by camera: Single Shot, Continuous, Self-Timer, & Bulb|
|Sync Type||2.5mm Sub-Mini|
|Power Supply||Transmitter: 1x CR-2032
Receiver: 2x AAA
|Battery Life||Transmitter: 3 Years
Receiver: 300 Hours