Wooden Camera E-Mount to PL-Mount Adapter for Sony FS5

Description

E-Mount to PL Adapter Pro (FS5,FS5mkII) is a shimmable Sony E-Mount to PL mount adapter that enables mounting of all PL mount lenses onto the Sony FS5/FS5mkII camera. In our factory, we set the flange focus to match a Sony FS5/FS5mkII camera. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding colour coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Mount includes a support ring that integrates with our Top Plate (Sony FS5,FS5mkII), a highly recommended addition to this system. Loosen the support ring thumbscrew to quickly remove the mount and install another adapter.

We also include a 1/4-20 Support Foot, that attaches to the bottom of the E-Mount to PL Mount, with 1/4-20 threaded hole for attaching to a tripod eliminating strain on the camera. The support foot can also be attached to the Unified Baseplate (FS7) or (FS5) using the vertical support hole and the Unified Lens Adapter Support Kit. PL Cap included to prevent dust from entering sensor area when lens is not attached.

This adapter will also work with any E-Mount camera like the FS7, A7, A7r, A7s, A7 II, FS100, FS700, NEX-5, NEX-6, NEX-7, etc, however, the support ring would not be utilised.

E-Mount to PL Mount Pro (Sony FS5) Instructions

Features:

• Support ring capable of integrating with Top Plate (Sony FS5,FS5mkII)

Shim set (stackable to achieve necessary thickness)

• Silver .0127mm (0.0005")
• Amber .0254mm (0.001")
• Purple .0381mm (0.0015")
• Red .0508mm (0.002")
• Green .0762mm (0.003")
• Tan .1016mm (0.004")
• Blue .127mm (0.005")