Zacuto Sony FX9 Gratical Eye Bundle has been discontinued, here are some related products you might like:
Zacuto Sony FX9 Gratical Eye Bundle
Features
- Optimally Balanced Shoulder Rig for FX9.
- VCT Pro Baseplate with Shoulder Pad.
- Gratical Eye Micro OLED EVF.
- FX9 Rosette-Mounted Trigger Grip.
- Axis Mini EVF Mount for Sony FX9.
Description
With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish Zacuto Sony FX9 Gratical Eye Bundle . Use it with all types of cameras, from DSLRs to larger models, like the Alexa.
A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1", and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.
The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.
An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4"-20 threaded holes on the side providing additional mounting options. 1/4"-20 and 3/8"-16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4"-20 and one 3/8"-16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.
Key Features:
- Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
- 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
- VCT14-compatible V-wedge
- 1/4"-20 and 3/8"-16 tripod mount holes
- Ergonomic gel polymer shoulder pad
- 15mm LWS rod adapter on the rear
- Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
- ARRI M6 rosette
- Three 1/4"-20 threaded holes for accessories
- Includes two 6.5" 15mm rods
- 1/4"-20 and 3/8"-16 screws supplied
- Made in the USA
Specifications
General | |
Mount Types | VCT14-compatible V-wedge 15 mm LWS rod ports in front and back 1/4"-20 and 3/8"-16 tripod mount holes 1/4"-20 and 3/8"-16 camera screws included 6.5" (16.5 cm) 15mm rods included ARRI M6 rosette Three 1/4"-20 threaded holes for accessories |
Dimensions | 14.25 x 4.25 x 2" (36.2 x 10.8 x 5 cm) (with included 6.5"/16.5 cm rods) |
Weight | 2.1 lb (0.96 kg) |
Display | |
Type | OLED |
Size | 0.61" / 15.1 mm |
Resolution | Full Display: 1280 x 1024 16x9 Area: 1280 x 720 |
Total Pixels | 5.4 million |
Pixel Density | 2687.21 PPI |
Contrast Ratio | 10,000:1 |
Refresh Rate | 60 Hz |
Colour Depth | RGB: 24-bit (16.7 million colours) |
Luminance | 120 to 250 cd/m2 |
Frame Rates Supported | 23.98p 23.98PsF 24p 24PsF 25p 25PsF 29.97p 29.97PsF 30p 30PsF 50i 50p 59.94i 60i 60p |
Interface | |
Video Input | 3G-SDI (resolution up to 1080p60) |
Power Input | 2-pin LEMO (accepts either polarity) |
Firmware Updates | USB (Type A) |
Mounting Options | 2 x Rosettes with 1/4"-20 screw thread |
General | |
Power Requirements | 12 to 16.8 VDC |
Weight | 14 oz (397 g) |
General | |
Rosette Type | M6 |
Rotation Range | 360° |
Length | 11.5" / 29 cm |
Adjustment Range | 6" / 15 cm |
Weight | Not Specified by Manufacturer |
Compatible Rod Diameter | 15 mm |
Dimensions and Weight | Not Specified by Manufacturer |
Rosette Type | 1/4"-20 Thread |
Dimensions and Weight | Not Specified by Manufacturer |
Connectors | 2.5 mm (male), 2.5 mm (female) |
Cable Length | 13.8" / 35 cm |
In The Box
- Zacuto VCT Pro Baseplate.
- Zacuto Gratical Eye Micro OLED EVF.
- Zacuto Sony FX9 Trigger Grip.
- Zacuto Axis Mini for Sony FX9.
- Zacuto LANC Extension Cable (13.8").
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Zacuto Sony FX9 Gratical Eye Bundle
- Manufacturer: Zacuto
- Model: Z-SX9-GRE2
- SKU: Z-SX9-GRE2
- RM Product #: 67284
- Warranty: Lifetime warranty on non-electronic products, 1 year warranty on electronic products