Zeapon Micro3 E500 Camera Slider with Motor + PONS Motorised Pan Head

Description

48cm Length, 59cm Travel Distance

The double travel distance of 59cm inch shortens the length of the rail slider, making it more portable in travel.

Hellaflush Design, 4kg Payload

Inspired by the design of Hellaflush car modification, the Zeapon Micro3 uses a new 45-degree angled track design. It disperses weight to both vertical and horizontal directions, resulting in a stable platform with amazing 4kg payload limit in any direction and a horizontal load of up to 12kg.

Vacuum Adjustable Damping

The Fluid Damping Technology of the Zeapon Micro Series allows videographers to create extremely smooth and consistent camera movements. With the Micro3, Zeapon introduces the latest “Vacuum Adjustable Damping”technology. The vacuum structure, combined with special damping grease not only provides a solid damping smoothness, but also allows stepless adjustment of the slider movement resistance. The damping setting can be adjusted between 1 and 5. The higher the number, the higher the resistance. The videographer can choose the setting that is most suitable to their usage and shooting style.

The Adjustable Damping technology also solves the problem of high resistance caused by extreme low temperature.

Fast Switching Without Replacement of Belt

The Zeapon Micro3 features a different non-carrying design than previous generations. The slider rail and motor are independent and driven by a high-strength stainless steel Arri gear. The motor can be integrated and removed easily by using the quick release screws. It’s effortless to switch between a manual and motorised slider to handle different shooting conditions. By removing the motor, the size of the slider can also be minimised which allows you to carry it easily when traveling

Triple Support System

The Zeapon Micro3 has a brand new triple support system. The stress point of the tripod support rods has been shifted from the centre of the slider to the support components at both ends where standard 1/4" and 3/8" screw ports are added as well, The new design not only brings greater stability when running on flat surfaces, it also allows you to maximise your creativity! You can have the Zeapon Micro3 mounted upside down or you can mount the Micro3 on a car easily. The entire Micro3 Series sliders come with tripod support rods, no need to purchase them separately.

All-round Belt

The Zeapon Micro3 comes with many improvements and upgrade that addressed every single area. The belt lock uses a large-diameter mechanical knob, no need to worry about damaging the belt or triggering it by accident.

As the belt could be loosen slight after long period of time, the belt now has a new elasticated design. Furthermore, the metal joints at both ends are eliminated permanently, thus in addition to the official accessories, users can purchase standard belts and install by themselves, economical and user friendly.

Nesting Screw With Hidden Design

Zeapons unique nesting screw is compatible with both 1/4 and 3/8 inch standard. When you don't need to use the screw, or when you want to put the device into a camera bag when packing up, you just need to press the screw and rotate it slightly, then the screw can be fully hidden to avoid scratching other devices and camera bags.

Key Features

• 478mm Length, 590mm Travel Distance
• With Motorized Slider
• Hellaflush Design, 4 KG Payload
• Vacuum Adjustable Damping
• Fast Switching Without Replacement of Belt
• Triple Support System
• Direct Power Supply