AVPro Edge 4K/60 4x4 HDBaseT Matrix Switcher
Features
- 18Gbps Uncompressed Bandwidth Support on HDMI
- 18 Gbps with ICT on HDBaseT outputs
- Audio Extraction, EDID management, IR, RS-232 and LAN control
- Built in Scaling, Test Patterns and Audio Delay
Description
The AVPro Edge 4K/60 4x4 HDBaseT Matrix Switcher is a true 4x4 HDMI/HDBaseT matrix switch. This unit includes 4 HDMI inputs, and 4 HDMI/HDBaseT output blocks. These output blocks include a HDBaseT and HDMI port, these ports are mirrored, and both are active. This Matrix supports HDMI 2.0(a/b), HDCP 2.2, up to 4K video resolution, and up to 18 Gbps bandwidth. We are able to pass 18Gbps through category cable by using the new HDBaseT technology we have developed called "ICT", learn more about ICT below. This switch allows any source (Blu-ray, UHD Blu-ray, satellite receiver, game consoles, PCs, etc ... ) to be shown on any of the connected displays. This matrix equalizes and amplifies the output to ensure the HDMI signal can be transmitted through long HDMI cables without loss of quality.
Audio Delay is “On-Board” so you can manage lip-sync issue before it is a problem. Also with built-in Scalers you don't have to forfeit that 4K signal just because you have a couple older displays. All that with Full EDID management allows maximum flexibility with today's wide mixture of sources and displays.
This is an ideal solution for digital entertainment centers, HDTV retail, show sites, data centers, schools, conference and training centers and more!
Features
- HDBaseT Compatibility Mode (HDBT-C)
- ICT Technology on the HDBaseT Outputs
- 4K Up/Down Scaling
- Extreme EDID Management
- Dual Audio De-Embedding
- Audio Delay
- Built-In Test Pattern
Specifications
Video | |
Video Resolutions | Up to 4K 60Hz 4:4:4 |
VESA Resolutions | Up to DCI 4K (4096x2160) |
HDR Formats/Resolutions | 420, 422, 444 (10 and 12 Deep Color) HDR10, HDR10+, Dolby Vision (24/30 Frames), HLG |
Color Space | YUV (Component), RGB (CSC: Rec. 601, Rec. 709, BT2020, DCI, P3 D6500) |
Chroma Subsampling | 4:4:4, 4:2:2, 4:2:0 Supported |
Deep Color | Up to 16 bit (1080), Up to 12 bit (4K) |
Scalers (HDMI) Per Output Optional | 1080P to 4K (Resolution Only, Framerate stays the same) |
Scalers (HDBaseT) Per Output Optional | 4K to 1080P (Resolution Only, Framerate stays the same) |
Audio | |
Audio Formats Supported HDMI | PCM 2.0 Ch, LPCM 5.1 & 7.1, Dolby Digtal, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS-X, Dolby Atmos |
Audio Formats Supported Extracted (Toslink) | PCM 2 Ch, LPCM 6 Ch, LPCM 7 Ch, Dolby Digital, Dolby Digital Plus, DTS-HD Master |
Audio Formats Supported Extracted (2CH Port) | PCM 2 CH (No Downmix) |
Audio Extraction Location | Bind to Input, Bind to Output or Matrix (Independent) |
Audio Delay (Per Output, Extracted) | Up to 630MS |
Distance | |
HDBaseT Out (4K60 4:4:4 & HDR) w/ AC-EX70-444-RNE | 70 Meters (Cat 6a) |
HDBaseT Out (1080P) w/ AC-EX70-444-RNE | 100 Meters (Cat 6a) |
HDBaseT Out (4K60 4:2:0 Max) w/ AC-EX70-UHD-R | 40 Meters (Cat 6a) |
HDBaseT Out (1080P) w/ AC-EX70-UHD-R | 70 Meters (Cat 6a) |
HDMI In/Out (4K60 4:4:4) | Up to 15m (using Bullet Train HDMI) |
HDMI In/Out (w/ AOC Cable) (4K60 4:4:4) | Up to 40m (using Bullet Train AOC) |
Other | |
Bandwidth HDMI | 18 Gbps Uncompressed |
Bandwidth HDBaseT | 18 Gbps (Uses ICT above 10.2 Gbps signals) |
HDCP | HDCP 2.2 and Earlier |
PoH for Receivers (No need to power receivers) | Yes, all outputs |
Control | |
Ports | LAN, RS232, IR, Mini USB |
Drivers | C4, RTI, ELAN, Crestron, URC (for more - see Drivers Page) |
PC Software | YES |
LAN WebOS | YES |
Ports | |
HDMI | Type A |
HDBaseT | RJ45 w/ PoH for HDbaseT Receivers |
LAN | RJ45 w/ Web Interface/Control |
Audio (Extracted Digital) | Toslink |
Audio (Extracted Analog) | 5 pin terminal block (balanced) |
IR Rx | 3.5mm Stereo (3 Conductor) |
RS232 | 3 pin terminal block |
Environmental | |
Operating Temprature | -5 to 51°C |
Storage Temperature | -20 to 60°C |
Humidity Range | 5-90% RH (No Condensation) |
Power | |
Power Consumption (Total) | 38 Watts Max |
Power Supply - Matrix | Input: AC 100-240V ~ 50/60Hz Output: DC 12V 4A |
Dimensions | |
Dimensions (Unit Only Height/Depth/Width) | 50.8 x 256 x 441.33mm |
Dimensions (Packaged Height/Depth/Width) | 88.9 x 393.7 x 495.3mm |
Weight (Unit) | 3.5 kg |
Weight (Packaged) | 5 kg |
In The Box
- AC-MX44-HDBT-AUHD (Matrix Switch)
- 48v Power Supply
- 1 x IR Remote Control
- Rack Ears
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: AVPro Edge 4K/60 4x4 HDBaseT Matrix Switcher
- Manufacturer: AVPro Edge
- Model: AC-MX44-AUHD-HDBT
- SKU: AC-MX44-AUHD-HDBT
- RM Product #: 61004