Audio-Technica Consumer AT-VM95SP/H Cartridge and Headshell Combo Kit
Features
- Pre-Mounted and Ready to Play
- AT-VM95SP Dual Moving Magnet Cartridge
- Designed for 78 RPM Mono Records
- Great for Archival Applications
- Conical Stylus
Description
The Audio-Technica Consumer AT-VM95SP Dual Moving Magnet Cartridge is specifically designed to play 78 RPM mono records with remarkable tonal quality. The cartridge can be mounted to a standard 1/2" mount and features integrated threaded inserts, allowing it to be mounted with just two screws (no nuts required).
The conical stylus has a spherical tip, which normally touches the center of the record groove walls. This design is well suited for older players with higher tonearm tracking forces. The cartridge is stereo, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. All VM95 Series share the same body, allowing the stylus to be replaced with any of the six interchangeable AT-VMN95 replacement styli. The Audio-Technica Consumer AT-VM95SP ships with mounting hardware.
Key Features:
- VM95 Series dual-magnet cartridge with 3.0 mil conical stylus for 78 RPM records.
- Aluminium cantilever.
- Durable low-resonance polymer housing.
- Threaded inserts in cartridge body enable the cartridge to be mounted to headshell with just two screws—no nuts or washers required.
- Compatible with any AT-VMN95 replacement stylus.
Specifications
Frequency Response | 20 Hz to 20 kHz |
Tracking Force | 4.5 to 5.5 g (2.0 g Standard) |
Recommended Load Impedance | 47 kOhms |
Output | 2.7 mV (1 kHz, 5 cm/Sec.) |
Channel Balance | 1.5 dB (1 kHz) |
Stylus Shape | 3.0 mm Conical |
Stylus Construction | Bonded Round Shank |
Stylus Cantilever | Aluminium Pipe |
Mount | 0.5" / 1.27 cm |
Replacement Stylus | AT-VMN95SP |
Impedance | Coil Impedance: 3.3 kOhms (1 kHz) |
DC Resistance | 485 Ohms |
Load Capacitance | 100 to 200 pF |
Coil Inductance (Le) | 550 mH (1 kHz) |
Static Compliance | 12 x 10-6 cm/Dyne |
Dynamic Compliance | 2 x 10-6 cm/Dyne (100 Hz) |
Vertical Tracking Angle | 23° |
Dimensions | 0.7 x 0.7 x 1.1" / 17.2 x 18.9 x 28.3 mm |
Weight | 0.2 oz / 6.1 g |
Material of Construction | Headshell and Connector: Aluminium |
Dimensions (HxWxD) | Not Specified by Manufacturer |
Weight | 0.3 oz / 9.0 g |
In The Box
- Audio-Technica Consumer AT-VM95SP Dual Moving Magnet Cartridge
- Audio-Technica Consumer AT-HS6 9g Headshell Aluminium Die Cast Body (Black)
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Audio-Technica Consumer AT-VM95SP/H Cartridge and Headshell Combo Kit
- Manufacturer: Audio Technica
- Model: VM95SPH
- SKU: VM95SPH
- RM Product #: 64829
- Warranty: 1 year manufacturer warranty on all Audio Technica products. 5 year limited warranty on all Audio Technica Wired Microphones.