Benro MPC30 Panorama Kit

Description

The MPC30 Panorama Kit from Benro is designed for capturing 2D and 3D panorama work without perspective offset, by allowing the camera to pivot vertically and horizontally around the nodal point of the lens. Made from alluminum alloy, it features a maximum load capacity of 10kg.

This kit is suitable for panormic shooting. When the camera is at the sliding plate of panoramic rotation axis, the other sliding plate can be rotated from and back around the tilt axis. This will make the camera roate around the camera or lens on the vertical and longitudinal axis so that the panoramic shooting can be achieved precisely and simply. The spliced panoramic images can be realised by using Benro MPC30 and splice software. It can be easily realised after a little treatment or software correction. After unlocking the vertical bracket of MPC30, it can be rotated to 90 degrees. It can be also relocked to decrease the storage space during transportation and also it can protect the sliding system from impact.

The DP70+ (the Larger Pan Head) has 6 Rotation Presets:

• 10° per click, 36 clicks per circle (recommended for 200mm equiv. lens)

• 15° per click, 24 clicks per circle (recommended for 135mm equiv. lens)

• 20° per click, 18 clicks per circle (recommended for 85mm equiv. lens)

• 36° per click, 10 clicks per circle (recommended for 50mm equiv. lens)

• 45° per click, 8 clicks per circle (recommended for 35mm equiv. lens)

• 60° per click, 6 clicks per circle (recommended for 28mm equiv. lens)