DPA Microphones d:vote 4099S Clip Microphone for Saxophone has been discontinued, here are some related products you might like:
DPA Microphones d:vote 4099S Clip Microphone for Saxophone
Overview
Description
The d:vote 4099S Clip Microphone for Saxophone from DPA Microphones is designed to clip onto your saxophone for live sound and recording purposes. Its mount can be adjusted by one hand and is optimized to attach itself gently to your instrument in order to prevent damage and marks. It can be used with soprano, alto, or baritone saxes.
The 4099S has a pre-polarized condenser capsule with a supercardioid polar pattern. Its gooseneck allows for a variety of positioning possibilities. The 4099S terminates in a MicroDot connector, providing compatibility with DPA's connection adapters for use with a variety of third-party wireless systems. An XLR adapter is included with a belt clip for use in a wired system with 48-volt phantom power.
Specifications
Transducer Type |
Pre-Polarized Condenser |
Polar Pattern |
Supercardioid |
Principle of Operation |
Pressure Gradient |
Frequency Range |
20 Hz to 20 kHz +/- 2 dB, 20 cm Distance: 80 Hz to 15 kHz with 2 dB Soft Boost @ 10 to 12 kHz, Second Order Low-Cut Filter @ 80 Hz |
Sensitivity |
6 mV/Pa; -44.5 dB Reference: 1 V/Pa (Nominal, +/- 3 dB) |
Equivalent Noise Level |
Typ. 23 dB(A) Reference: 20 µPa (Maximum 26 dB(A)) (A-Weighted) |
Signal to Noise Ratio |
71 dB (Reference: 1 kHz @ 1 Pa, 94 dB SPL) |
Total Harmonic Distortion (THD) |
< 1 % up to 123 dB SPL peak < 1 % up to 120 dB SPL RMS sine |
Dynamic Range |
100 dB |
Maximum SPL |
142 dB (Peak Before Clipping) |
Output Impedance |
MicroDot: 30 to 40 Ω, XLR: 100 Ω |
Cable Drive Capability |
XLR: 984' (300 m) |
Output Balance Principle |
Signal balanced with XLR adapter |
CMRR |
XLR Adapter: > 60 dB @ 50 Hz to 15 kHz |
Power Supply |
Minimum 5 V to Maximum 50 V through DPA adapter for wireless systems 48 V phantom power ±4 V with XLR adapter |
Current Consumption |
MicroDot: 1.5 mA XLR Adapter: 3.5 mA |
Connector |
MicroDot XLR Adapter Included |
Polarity |
Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter) |
Operating Temperature |
-40° to 113°F (-40° to 45°C) |
Relative Humidity |
Up to 90% |
Cable Length |
6' (1.8 m) |
Gooseneck |
Length: 5.5" (140 mm) |
Capsule Diameter |
0.2" (5.4 mm) |
Microphone Length |
1.8" (45 mm) |
Weight |
1.1 oz (31 g) |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: DPA Microphones d:vote 4099S Clip Microphone for Saxophone
- Manufacturer: DPA Microphones
- Model: VO4099S
- SKU: VO4099S
- RM Product #: 20816