The PX-Sub10A Active Subwoofer for PX-Series from ICON Digital is a 200 watt powered subwoofer that features a 10-inch long-throw paper cone woofer and is designed for studio applications. It can respond to frequencies down to 30 Hz, and features an adjustable crossover frequency and phase adjustment switch.
Features
- 10" long throw, paper cone woofer
- Phase adjustment in 0° / 180°
- 30-200 Hz precise low-frequency reproduction
- Balanced XLR outputs
- Subwoofer level control
- Adjustment of Crossover frequency ranges
- Low frequency extension adjustment
- Built-in 200 W @ 8 O amp module
Specifications
| System | Active subwoofer |
| Bass Principle | Bass reflex |
| Frequency Response | 30 to 200 Hz |
| Inputs | LFE/Slave: 1x balanced XLR connector SAT/SUB: 1x Right/Left full bandwidth XLR |
| Input Impedance | + Branch: 20 kO - Branch: 10 kO |
| Sensitivity | 75 mW to 5 V, adjustable |
| Maximum Input Voltage | 8 V |
| Outputs | Slave: 1x XLR connector SAT/SUB: Right/Left, high-pass filtered, XLR & RCA |
| Output Impedance | 100 O, each branch |
| XLR Configuration | Pin 1: 0 Pin 2: + Pin 3: - |
| Mode | Mode Selector: LFE & slave |
| Phase | Phase Adjustment: 0/180° |
| High Pass Filter | Flat, 60, 80 Hz |
| Low Pass Filter | 50 to 150 Hz |
| Power Mode | On/Auto |
| Amplifier Power | 120 W @ 4 O |
| Woofer | Cone: 10" (256 mm) long throw paper cone Coil: 2" (50 mm) voice coil |
| Cabinet Volume | 29 L |
| Power Consumption | Standby: <5 W Maximum: 300 W |
| Voltage | 120 V, 50/60 Hz 220 V, 50/60 Hz |
| Dimensions (L x W x H) | 14.2 x 13.0 x 16.3" (360 x 330 x 450 mm) |
| Weight | 44.1 lb (20 kg) |
