Kingston 8GB HyperX DDR4 2133 MHZ UDIMM Memory Kit (2 x 4GB)

Description

Upgrade the memory in your compatible system using the 8GB HyperX DDR4 2133 MHZ UDIMM Memory Kit from Kingston . This memory kit features a capacity of 8GB, which comes in a configuration of 2 x 4GB, a clock speed of 2133 MHz (PC4-17000), a 288-pin UDIMM form factor, operates using 1.2V, and has a CAS latency of CL14. Additionally, this RAM is unbuffered, non-ECC, features support for Intel Extreme Memory Profiles (Intel XMP), is single ranked, and is based on eight 512M x 8-bit FBGA components.

Adding more memory to your system will help boost its capabilities, including improving system performance and application responsiveness. Start-up times will be improved with fewer delays during routine operations, and more programmes will be able to run simultaneously with easier switching between them. This memory module is protected by a limited lifetime warranty.

Features

General Features

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP - 2.5V Typical
• VDDSPD = 2.2 to 3.6V
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• Height: 1.34" / 34.04 mm (with heatsink)

Specifications