Matthews: Mounting Hardware
Filters
Back to results
SORT BY
ITEMS PER PAGE
Categories
Narrow Results
STOCK
FILTER
PRICE
FILTER RESULTS
Matthews Gobo Plate XL
- Two T-slots with V centering quickly secure grip head mounting
- 4 x ½” diameter holes for pear-snap placement prevent 4.5" grip head removal when loose, allowing plate to be safely captured when rigged
- 12 x 3/8” bolt holes and 20 each screw or nail holes secure the plate to set walls and lumber
- One 5/8” hole in the center of the plate to receive baby pins, 5/8” rods and mount half grid clamps
- Six evenly spaced markers on the edges allow for placement at a 45-degree angle without needing to measure it out
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$94.95
Matthews Pin with Collar - 6"
- Small and Easy to Store
- Mount in a Grip Head
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$61.95
Matthews Baby Pin - 5/8" with 3/8" Threaded Tip
- For Use with Lightweight Telescoping Hangers
- Usable with a Variety of Grip Equipment
- Male Threaded Tip
- Screws into Female 3/8" Hole
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$30.95
Matthews C - Clamp with 2- 5/8" Baby Pins - 6"
- 2 Separate 5/8" Diameter Pins
- Clamp Jaw Offers a Maximum 6" Opening
- Allows Light Fixtures to Fit with Minimal Clearance
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$269.00
Matthews Lightweight Telescoping Hanger with Pipe Clamp and Stirrup Hanger
Available to order today
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$499.00
Matthews Infinity Arm Anti-Rotation Tip
- 3/8” threaded pin mount with indexing pins
- Precision machined ball mount pairs with Infinity Arm
- Black anodize coating
Pre-Order
ETA to be confirmed
what does this mean?
Full Price:
$159.00
Deposit:
$15.00
Matthews LB2 Location Baby Bracket
- 5/8" Knurled Baby Pin With Safety Hole
- 4x 1" Strap Pass Throughs
- Two 1/4" Mounting Holes
- Four Nail / Screw Holes
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$119.00
Matthews Quacker Clamp
- AKA - Duck Bill or Platypus Clamp
- For Positioning Foam Core, Reflector or Bead Board
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$279.00
Matthews MICROgrip Head
- Diameter is Only 1.25" (32mm)
- All the Features of a 2 1/2" Griphead.
- Ideal for Tabletop and Miniature Work.
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$119.00
Matthews Hollywood Grip Head 2 1/2" (Black)
- 2 1/2" grip head.
- Large knobs.
- Non-slip.
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$119.00
Matthews Super Mafer Clamp with 5/8" Pin - Black
- A Baby (5/8" diameter) snap-in pin is included for mounting light fixtures.
- Snap-in pins have a hexagonal end that locks into place in the Mafer Clamp.
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$129.00
Matthews Grid Clamp with Grip Head (2.5")
- Double Hand Wheels, no Tools Required
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$319.00
Matthews The Claw Rigging Clamp for Tube Lights
- Textured rubber to grip without surface damage.
- Lightweight with black finish
- Low-profile 5/8” pin mounts
- Magnets keep claw fingers open when mounting
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$219.00
Matthews Big Ben Clamp
A cheeseboro clamp with a 1-1/8" pin attached.
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$199.00
Matthews Hollywood Grip Head 2 1/2"
- 2 1/2" grip head
- Large knobs
- Non-slip
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$119.00
Matthews Hollywood Grip Head 4 1/2"
- 1-1/8" Junior Pin
- Aluminium Construction
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$299.00
Matthews Super Mafer Clamp with Baby 5/8" Pin
- Strengthened to withstand greater clamping pressure
- Protective pads in the jaws have been reformulated for better gripping action
- Comes with a snap-in pin
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$129.00
Matthews Junior Pipe Clamp
- Forged steel
- Safety chain and pin
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$219.00
Matthews Baby Pipe Clamp with 5/8" Pin
- 5/8" pin for mounting
- Safety chain and pin
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$139.00
Matthews Mini Matthellini
- 3/8"-16 Male Thread
- End Jaw Design
- Jam Nut to Prevent Rotation
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$149.00
Matthews Matthellini Clamp (6" End Jaw, Silver)
- 5/8" Pin
- Steel Construction
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$149.00
Matthews Matthellini Clamp (2" End Jaw, Silver)
Provides strong, solid gripping
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$189.00
Matthews Matthellini Clamp (3" Center Jaw, Silver)
Provides strong, solid gripping of round, square or rectangular tubing and many other common and irregular shapes.
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$149.00
Matthews Snap In Pin - 5/8"
- For Mounting Light Fixtures to a Mafer Clamp
- Standard 5/8" Stud
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$27.95
Matthews Super Mafer Clamp
- Protective Pads in Jaws for Better Grip
- Accepts Snap-In & Standard Baby Pins
- Strengthened to Withstand Great Clamping Pressure
Usually ships in 4 - 6 weeks
what does this mean?
You Pay:
$119.00
Matthews Monitor Mount for Baby (5/8") Spigot
- Compact Aluminium
- 29.5 kg Capacity
- Folds Flat to Your Monitor
- Maximum Tilt is ±45°
- Locking Pan & Tilt Handles
In stock
Ships tomorrow
You Pay:
$509.00
(1) review