Accessories
512 Audio 512-POP Professional Microphone Pop Filter
- Prevents plosives or “pop” sounds
- Fits any boom arm or desk stand
- Flexible, sturdy gooseneck
- Adjustable swivel c-clamp
- Perfect for close-range speech or singing
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$69.00
AKG C480B - Power Module for Ultra Linear Series
- Interchangeability
- Switchable Attenuation
- Low Cut Roll Off
- Phantom Power
Special Order
You Pay:
$1,599.00
AKG H41 Lavalier Tie Pin
Available to order today
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$17.95
AKG H500 Gooseneck Shock Mount
Provides Attenuation of Structure-Borne Noise by 12 dB
Usually ships in 4 - 6 weeks
You Pay:
$119.00
AKG H600 Lockable Gooseneck Shock Mount
Provides Excellent Attenuation of Structure-Borne Noise by 20 dB
In stock
Ships direct tomorrow
You Pay:
$419.00
AKG H85 Spider Suspension Shock Mount
Universal Shock Mount for Microphones w/Shaft Diameters - 19 to 22mm
In stock
Ships direct tomorrow
You Pay:
$149.00
You Pay:
$209.00
You Pay:
$62.95
AKG SA60 Stand Adapter
Stand Adapter for Straight Shaft Microphones
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$65.95
AKG SA61 Stand Adapter
Stand Adapter for Tapered Shaft Microphones
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$25.95
AKG SA63 Stand Adapter
- Fits the C1000S
- Provides stability
- 3.4 cm diameter condenser
- Easier to mount and remove
- Minimal friction noise
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$77.95
AKG SH100 Suspension Shock Mount Perception
- Fits Perception Series Microphones
Usually ships in 4 - 6 weeks
You Pay:
$159.00
You Pay:
$279.00
AKG ST6 Heavy Duty Table Top Stand
Two professional 3-pin XLR connectors, compatible with a wide range of microphones, very good shock absorbing qualities
Special Order
You Pay:
$329.00
You Pay:
$22.95
AKG W3001 Foam Windscreen
Foam Windscreen for use with Various AKG Series Microphones
Usually ships in 4 - 6 weeks
You Pay:
$42.95
AKG W32 Foam Windscreen
Foam Windscreen for use with Ballhead Microphones
Usually ships in 4 - 6 weeks
You Pay:
$34.95
AKG W407 Foam Windscreen For C407/c417
Available to order today
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$19.95
You Pay:
$149.00
AKG W414X Microphone Windscreen
For AKG C414XLS, C414XL II and C3000 Recording Microphones
Availability on Request
You Pay:
$75.95
You Pay:
$14.95
AKG W444 Foam Windscreen
- For use with C544L/C555L
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$18.95
You Pay:
$40.95
You Pay:
$39.95
AKG W70 Foam Windscreen for CK47 and C747-V11
- Use with the AKG CK47 and CK80
- Minimises wind noise
- Reduce high-frequency response
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$34.95
AKG W77M Wire Mesh Grille
Wire Mesh Grille for use with Various AKG Microphones
Usually ships in 4 - 6 weeks
You Pay:
$84.95
AKG W81 Foam Windscreen For Hc81 Headworn Beige
Available to order today
Usually ships in 4 - 6 weeks
You Pay:
$15.95
AKG W880 Foam Windscreen
Foam Windscreen for use with Ball Head Microphones
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$9.95
Adam Hall S 5 BE Microphone Stand with Boom Arm (Black)
- Sturdy tripod microphone stand
- Adjustable height from 0.98m to 1.62m
- Collapsible design for easy transport and storage
- Includes a 760 mm boom arm for perfect microphone positioning
In stock
Ships tomorrow
You Pay:
$44.95
Aston Element Custom Pop Filter
- Custom Design for the Aston Element
- Eliminate Unwanted Plosives and ‘esses’
- Magnetic Attachment for Easy Application
- Shielded Magnets Leaving Audio Free of Artefacts
Contact us for an ETA
You Pay:
$67.95
Aston Element Custom Shock Mount
- Custom Designed for Aston Element
- Sleek and Stylish Design
- Keeps Out Bad Vibrations
Contact us for an ETA
You Pay:
$119.00
Aston Microphones Halo Ghost Reflection Filter
- Portable acoustic booth technology
- Pure white
- 360 Filtering kills reflections
- Lightweight, patented PET felt construction
- Easy-mount hardware
- Built in front and rear diffusion
Pre-Order
ETA to be Confirmed
Full Price:
$739.00
Deposit:
$75.00
Aston Microphones Halo Reflection Filter
- Vertical and Horizontal Filtering
- Corrugated Surface Diffuses Sound
- 100mm Radius for Sound Isolation
- Portable and Lightweight
Contact us for an ETA
You Pay:
$649.00
Aston Microphones Halo Reflection Filter Black
- Vertical and Horizontal Filtering
- Corrugated Surface Diffuses Sound
- 100 mm Radius for Sound Isolation
- Portable and Lightweight
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$649.00
Aston Microphones Swift GN Shield
- Plosive Reduction for Vocals
- Stainless-Steel Construction
- Hexagonal Design for Vocal Clarity
- Wrap-Around Design
- Flexible 15.4" (39.1cm) Gooseneck
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$149.00
Aston Microphones SwiftShield
- For Microphones 40 to 60mm in Diameter
- Shockmount Provides Mechanical Isolation
- No Rubber bands in Construction
- Stainless-Steel Pop Shield
- Hexagonal Filter Holes for Vocal Clarity
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$259.00
Aston Starlight Mic Clip
- Securely Holds Microphone
- Pivot Action for Placement Accuracy
- Custom Designed for Aston Starlight
Contact us for an ETA
You Pay:
$29.95
Aston Starlight Microphone Windscreen
- Reduces Vocal Plosives
- Reduces Wind Noise
- Protects Mic from Moisture and Dirt
Contact us for an ETA
You Pay:
$29.95
Aston Swift Shock Mount
- For Microphones 40 to 60mm in Diameter
- Shockmount Provides Mechanical Isolation
- No Rubber bands in Construction
- Aluminium & Glass-Fill Nylon Construction
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$209.00
Aston Swift ShockStar Replacement for Swift and SwiftShield
- For Swift and SwiftShield Shockmounts
- Maximizes Isolation from Vibration
- Eliminates Need for Rubber Bands
- High Level of Elasticity
Contact us for an ETA
You Pay:
$40.95
Audac PSD124 Power Supply 12v DC 4a 50w
- For extension units, interface boxes
- 12V DC or 24V DC
Usually ships in 8 - 12 weeks
Audac PSD241 Power Supply 24v DC 1.67a ABS
- For equipment with low power consumption
- 1,67A at max 40W
- Good for Audac AMP20 amplifier
Usually ships in 8 - 12 weeks
Audio Technica 149406680 Replacement Cable for AT2020USB
Available to order from Rubber Monkey Today.
Usually ships in 2 - 4 weeks
You Pay:
$34.95
Audio Technica AT2020TRIPOD Mic Stand for AT2020 Mini Tripod
As supplied with AT2020.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$59.95
Audio Technica AT8109 Foam Windscreen for M25/26 (Black)
2-stage foam windscreen that fits case styles M25 and M26.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$22.95
Audio Technica AT8109 Foam Windscreen for M25/26 (White)
2-stage foam windscreen that fits case styles M25 and M26.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$32.95
Audio Technica AT8114 Foam Windscreen (Ball-Shaped)
- Ball-shaped foam windscreen
- Protects against plosives
- Black colour
- For MB3000L microphones
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$14.95
Audio Technica AT8117 Windscreen
Fits Audio-Technica Case Styles M2, M12, and M34.
Usually ships in 2 - 4 weeks
You Pay:
$13.95
Audio Technica AT8118 Pop Filter Windscreen for ATM350/PRO35
For use with the ATM350 and PRO35 instrument microphones.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$16.95
Audio Technica AT8120 Foam Windscreen (Large)
- Fits over AT822 microphone
Usually ships in 2 - 4 weeks
You Pay:
$24.95
Audio Technica AT8128 Foam Windscreen for Headworm Microphone (Small)
- Small foam windscreen
- For ATM73 models
- Black colour
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$11.95
Audio Technica AT8135 Shotgun Microphone Windscreen
- For AT815 Microphone
- Shotgun windscreen
In Stock
Ships tomorrow
You Pay:
$75.95
Audio Technica AT8137 Foam Windscreen
- Foam windscreen
- For large diaphragm studio microphones
In stock
Ships tomorrow
You Pay:
$61.95
Audio Technica AT8138 Gooseneck Foam Windscreen for M14/17/27 (White)
Fits Audio-Technica Case Styles M14, M17, M27
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$40.95
Audio Technica AT8139L Headworn Mic Windshield foam Case M19 (Large)
Headworn Microphone Windscreen.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$10.95
Audio Technica AT8146 Small Foam Windscreen
- For PRO49 Q gooseneck microphone
- Small foam windscreen
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$14.95
Audio Technica AT8146WH Small Foam Windscreen (White)
- Small foam windscreen
- Protects against plosives
- White colour
Usually ships in 2 - 4 weeks
You Pay:
$8.95
Audio Technica AT8150-TH Element Cover for Audio-Technica AT899 (Beige x3)
- Capsule covers
- Perfect for when not in use
- Beige colour
- for AT899 microphones
Usually ships in 2 - 4 weeks
You Pay:
$26.95
Audio Technica AT8153BK 2-Stage Foam Windscreen (Small/Black)
- Deliver crisp sound
- Blimp-screen barrier
- Outer shell slows approaching air
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$17.95
Audio Technica AT8154BK 2-Stage Foam Uniline Windscreen (Black)
- Slim boomline
- 2-stage mic filters
- Blimp-screen barrier
- Delivers crisp sound
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$20.95
Audio Technica AT8154WH 2-Stage Foam Uniline Windscreen (White)
- Pin-drop sound quality
- Slim boomline
- Filters out the unimportant
- Blimp-screen barrier
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$40.95
Audio Technica AT8157 Windscreens for AT892 Head-worn Microphone (Set of 3) (Beige)
- Eliminate wind noise
- For AT892 microphone element
- Pack of three
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$31.95
Audio Technica AT8159 Windshield
Microphone Foam Windcreen
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$23.95
Audio Technica AT8405A Snap-in Microphone Stand Clamp
- Fits 21mm Diameter Microphones
- Mounts 5/8"-27 Threaded Stands
- Pivot Action for Placement Accuracy
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$22.95
Audio Technica AT8406A Slip-in Microphone Stand Clamp
Fits microphones with a tapered body.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$18.95
Audio Technica AT8410A Shock Mount (Spring Loaded)
- Attenuates noise and vibration
- Spring-clip
- Easy microphone insertion and removal
- Compatible with 5/8"-27 threaded stands
In Stock
Ships tomorrow
You Pay:
$99.95
Audio Technica AT8415 Low Profile Universal Shock Mount
- Shockmount for Boompoles & Mic Stands
- Reduces Vibration Noise
- Rubber Membrane Suspension
- Constant-Tension Clutch
- Provides 360° Rotation
In Stock
Ships tomorrow
You Pay:
$109.00
Audio Technica AT8416 Shock Mount for Gooseneck Microphones
- Mount into surfaces
- Provide noise isolation
- 5/8"-27 thread stud
In Stock
Ships tomorrow
You Pay:
$80.95
Audio Technica AT8439 Clothing Clip for Cable
- Clip to your clothing
- For any lavalier microphone
- Mounts to microphone cable
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$7.95
Audio Technica AT8449 Shock Mount (Black)
- Professional shock mount
- For AT4050, AT4040 and AT4033 microphones
- Isolates the microphone
- Compatible with 5/8"-27 threaded stands
In Stock
Ships tomorrow
You Pay:
$139.00
Audio Technica AT8449 Shock Mount (Silver)
- Attenuates noise, shock and vibration
- For use with select microphones
In Stock
Ships tomorrow
You Pay:
$159.00
Audio Technica AT8455 Shockmount for AT2020USB-X Microphone
- Mount AT2020USB-X on Mic Stand
- Isolates Microphone from Vibrations
- Elastic Suspension
- Compatible with 5/8"-27 Threaded Stands
- Compatible with 3/8"-16 Threaded Stands
Usually ships in 2 - 4 weeks
You Pay:
$89.95
Audio Technica AT8456A Quiet-Flex Microphone Stand Clamp for Wireless Transmitters
- Quite-flex clamp
- Adjustable angle
- Screws onto 5/8"-27 threaded mic stands
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$34.95
Audio Technica AT8458A Microphone Shock Mount
Effectively attenuates noise, shock and vibration.
Usually ships in 2 - 4 weeks
You Pay:
$119.00
Audio Technica AT8466 Microphone Shock Mount for AT2020
Microphone shock mount for AT2020
In Stock
Ships tomorrow
You Pay:
$77.95
Audio Technica AT8470 Quiet-Flex Microphone Stand Clamp
Fits microphones with a tapered body.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$22.95
Audio Technica AT8471 Isolation Clamp
- Reduces vibration and noise
- Easy to install
- Adds mic stability
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$40.95
Audio Technica AT8472 Microphone Camera Shoe Mount
Slip-in microphone clamp for camera mounting.
In Stock
Ships tomorrow
You Pay:
$85.95
Audio Technica AT8484 Microphone Shockmount for the BP40 Broadcast Microphone
- For BP40 Broadcast Microphone
- Attenuates Noise, Shock, & Vibrations
- Compatible with 5/8"-27 Threaded Stands
In Stock
Ships tomorrow
You Pay:
$189.00
Audio Technica AT8538 In-Line Power Module
Power module for electret microphones.
In Stock
Ships tomorrow
You Pay:
$109.00
Audio Technica AT8646QM Shock Mount Plate XLR Female Connector Mount
- Shock Mounted
- 48V Phantom Power
- XLR-female type input
In Stock
Ships tomorrow
You Pay:
$81.95
Audio Technica AT8647QMS Microphone Shock Mount Plate
- For mounted microphones
- Suspended rubber panel
- Reduction of mechanical noise
- Designed to fit
- Best performance for table tops
In Stock
Ships tomorrow
You Pay:
$169.00
Audio Technica AT8651 Threaded Shock Mount Adapter
Fits Audio-Technica Case Style(s): M26, M27.
Usually ships in 2 - 4 weeks
You Pay:
$169.00
Audio Technica AT8657/LED Flush-Mount Microphone Adapter
- Flush-mount microphone adapter with LED ring and touch switch for EXTERNAL control
- Flush-mount Microphone Socket with LED Ring and Touch Switch
In Stock
Ships tomorrow
You Pay:
$259.00
Audio Technica AT8662 Shock Mount for Unipoint Series Gooseneck Microphones
- Secure UniPoint series gooseneck microphones
- Minimises vibration
- Minimises reflection
- Minimises surface born noise
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$51.95
You Pay:
$86.95
Audio Technica Windshield AT8101
Large Cylindrical Foam Windscreen
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$13.95
Audio-Technica AT8543 Mic Power Module Inline 48V
Power module for ATM350A MicroSet, also suitable for any Audio-Technica Wireless Essentials microphone terminated with 4 pin locking connector
In Stock
Ships tomorrow
You Pay:
$219.00
Audio-Technica Small Foam Windscreen
Designed to fit over the Audio Technica PRO49 Q gooseneck microphone
In Stock
Ships tomorrow
You Pay:
$129.00
Auray Rubber Spacer Sleeve for XLR Shotgun Microphones on Camcorders
- Snug Fit for Shotgun Mic on Camcorder
- Increases Diameter of Mic
- Soft Rubber Construction Grips Mic
- Length: 1.75"
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$28.95
Auray WLF-018-3 Foam Windscreens for 1/8" Diameter Microphones (3 Pack)
- High-Quality Acoustic Foam
- Reduces Vocal Plosives
- Reduces Wind Noise
- Protects Mic from Moisture and Dirt
- For Microphones 1/8" in Diameter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$23.95
BOYA BY-C04 Universal Shock Mount
For PVM1000 and PVM1000l Microphones, Reduces Microphone Noise, Eliminates Vibration from Handling, 3/8"-16 and 1/4"-20 Threads
In stock
Ships tomorrow
You Pay:
$24.95
Behringer LINE 2 USB Stereo 1/4" Line to USB Interface Cable (6.6')
- For Recording Electronic Instruments
- Dual-Mono 1/4" Jack Connectors
- Stereo Line to USB Interface Cable
- 6.6' Cable Length
- Compatible with Mac or Windows Computers
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$69.95
Behringer Mic Link Compact Dynamic Microphone Booster
- Dynamic mic booster
- High-quality preamp
- Up to +27 dB of gain
- Rugged, road-worthy construction
Contact us for an ETA
You Pay:
$76.95
Behringer MicroPower PS400
Ultra-Compact Phantom Power Supply
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$75.00
Blue Mantis Foam Microphone Windscreen for Blue Yeti and Yeti Pro
- Perfect filter - filter out all unwanted background noises to improve your sound quality.
- Protects your microphone by keeping out harmful dust and moisture
- Protect your mic while ensuring high-quality sound
Usually ships in 3 - 4 weeks
You Pay:
$10.95
Blue Yeticaster Broadcast Bundle (Black)
- Multiple pattern selection - cardioid, bidirectional, omnidirectional & stereo.
- Gain control, mute button, zero-latency headphone output.
- Plug 'n play - Mac and PC compatible. Compass, premium tube-style broadcast boom arm.
- Extended dimensions in stand is 4.72 x 4.92 x 11.61 in inches.
- Radius III custom shock mount isolates Yeti from noise, shock & vibrations.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$479.00
Boya BY-BA20 Spring-Loaded Suspension Arm
- Adjustable Hinge Controls
- Combo Mount Can be Clamped or Screwed-In
- Heavy-Duty Combo Mount
In stock
Ships tomorrow
You Pay:
$60.95
Boya BY-C03 Shock Mount
- Microphone Shock Mount
- Reduces the Noise from Vibration
- Compatible with BOYA BY-VM300PS, BY-V02;
- Suitable for Microphone Diameter of 40mm-48mm
Usually ships in 4 - 6 weeks
You Pay:
$18.95
Boya BY-RF5P Acoustic Shield
- High-density EVA acoustic foam to absorb the off-axis voice from the front
- Ideal for home recording studio, live streaming, or professional vocal recording
- Works well with USB condenser microphones and large diaphragm microphones (BY-PM700/BY-M1000)
- Easy to use and space-saving
- Vented metal back plate to prevent the room reverberation and reflection from the back
- 3/8” screw and washer for attaching to booms or stands
In stock
Ships tomorrow
You Pay:
$94.95
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Blue, Extra-Large)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 180mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Blue, Large)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 155mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Blue, Medium)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 130mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Blue, Small)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 105mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Blue, XL/Big Mount)
- Reduces Wind Noise
- Fits Microphones 23 to 26mm in Diameter
- 180mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Blue, XS/Big Mount)
- Reduces Wind Noise
- Fits Microphones 23 to 26mm in Diameter
- 55mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Green, Extra-Large)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 180mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Green, Large)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 155mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Green, Medium)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 130mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Green, Small)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 105mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Green, XL/Big Mount)
- Reduces Wind Noise
- Fits Microphones 23 to 26mm in Diameter
- 180mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Green, XS/Big Mount)
- Reduces Wind Noise
- Fits Microphones 23 to 26mm in Diameter
- 55mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Red, Extra-Large)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 180mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Red, Large)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 155mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Red, Medium)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 130mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Red, Small)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 105mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Red, XL/Big Mount)
- Reduces Wind Noise
- Fits Microphones 23 to 26mm in Diameter
- 180mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Shotgun Mics (Red, XS/Big Mount)
- Reduces Wind Noise
- Fits Microphones 23 to 26mm in Diameter
- 55mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Small-Diaphragm Mics (Blue, XS)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 55mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Small-Diaphragm Mics (Green, XS)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 55mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur System for Small-Diaphragm Mics (Red, XS)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 55mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Twin Windbubbles Imitation-Fur Windscreen Set for Lav Mics 5 to 9mm (Beige)
- World-renowned protection from wind
- Windbubbles won't fall off
- Natural sound
- Multi-pile fur
- Natural colours
Usually ships in 1 - 2 weeks
You Pay:
$94.95
Bubblebee Industries Twin Windbubbles Imitation-Fur Windscreen Set for Lav Mics 5 to 9mm (Black)
- World-renowned protection from wind
- Windbubbles won't fall off
- Natural sound
- Multi-pile fur
- Natural colours
Usually ships in 1 - 2 weeks
You Pay:
$94.95
Bubblebee Industries Twin Windbubbles Imitation-Fur Windscreen Set for Lav Mics 5 to 9mm (Brown)
- World-renowned protection from wind
- Windbubbles won't fall off
- Natural sound
- Multi-pile fur
- Natural colours
Usually ships in 1 - 2 weeks
You Pay:
$94.95
Bubblebee Industries Twin Windbubbles Imitation-Fur Windscreen Set for Lav Mics 5 to 9mm (Grey)
- World-renowned protection from wind
- Windbubbles won't fall off
- Natural sound
- Multi-pile fur
- Natural colours
Usually ships in 1 - 2 weeks
You Pay:
$94.95
Bubblebee Industries Twin Windbubbles Imitation-Fur Windscreen Set for Lav Mics 5 to 9mm (Off-White)
- World-renowned protection from wind
- Windbubbles won't fall off
- Natural sound
- Multi-pile fur
- Natural colours
Usually ships in 1 - 2 weeks
You Pay:
$94.95
Bubblebee Industries Twin Windbubbles Imitation-Fur Windscreen Set for Lav Mics 5 to 9mm (White)
- World-renowned protection from wind
- Windbubbles won't fall off
- Natural sound
- Multi-pile fur
- Natural colours
Usually ships in 1 - 2 weeks
You Pay:
$94.95
Bubblebee Industries Windbubble Miniature Imitation-Fur Windscreen (Lav Size 3, 40mm, Off-White)
- Fits 5 to 9mm (0.19 to 0.35") Mics
- Elastic Opening: 40mm (1.57")
- Imitation Fur
Usually ships in 1 - 2 weeks
You Pay:
$66.95
Canare 161U A/V Bulkhead Panel (Unloaded Patch / Flush Mount)
Allows you to flush mount 16 unified series connectors.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$189.00
Canon AD-E1 Multi-Function Shoe Adapter
- Use Existing Hot Shoe Accessories on EOS R3
- Dust and Drip Proof Design
- Static Pressure Strength Allows Large Professional Accessories
Contact us for an ETA
You Pay:
$77.95
Countryman ISOMAX 2 Flute Clip
- Clip Accommodates Flutes up to 3/4" in Diameter
- For Countryman ISOMAX 2
Contact us for an ETA
You Pay:
$32.95
DPA d:dicate Floor Stand with Modular Active 120cm Single Boom
Can be used to attach microphones for use in various audio applications
Special Order
You Pay:
$1,389.00
DPA Base with MicroDot Connector Cable for SC4098 Microphone (Black)
- XLR, Active, Balanced
- Unterminated, Active, Balanced
- MicroDot, Passive, Unbalanced – use a DPA Adapter to connect to a wireless system
Special Order
You Pay:
$349.00
DPA DM6000-BX, Microphone Base
- Outstanding audio quality
- Slim, elegant Scandinavian design
- Highly directional – very isolated
- High rejection of radio frequency interference
Special Order
You Pay:
$519.00
DPA DUA0567 Foam Windscreen for DPA Microphones 4060, 4061, 4062, 4063, 4071 - 5-Pack (Beige)
Available to purchase form RubberMonkey.co.nz
Special Order
You Pay:
$55.95
You Pay:
$239.00
DPA DUA6002 - Grid Cap with High Boost Frequency Contour for DPA Miniature Series (Black) (5 Pieces)
- High Boost
- Black
Special Order
You Pay:
$109.00
DPA DUA6006 Grid Cap with High Boost Frequency Contour for DPA Miniature Series (White) (5 Pieces)
- High Boost
- White
Special Order
You Pay:
$109.00
DPA Grid Cap with High Boost Frequency Contour for DPA Miniature Series (Beige) (5 Pieces)
- High Boost
- Beige
Special Order
Usually ships in 2 - 3 weeks
You Pay:
$89.95
DPA Grid Cap with Soft Boost Frequency Contour for DPA Miniature Series (Beige) (5 Pieces)
- Soft Boost
- Beige
Special Order
You Pay:
$109.00
DPA Microphones CM4099 - Clamp Mount for d:vote 4099 Instrument Microphone
- Mounts d:vote 4099 Instrument Microphone
- For Saxophones, Brass Instruments
- Fits Many Types of Instruments
- Flexible Design, Easy One-Hand Mounting
- Quickly Move Mic Between Instruments
Special Order
You Pay:
$72.95
DPA Microphones Cello Mounting Clip for DPA 4099C Microphone
Designed to fit a DPA 4099C Clip Microphone for Cello.
Special Order
Usually ships in 2 - 3 weeks
You Pay:
$78.95
You Pay:
$16.95
DPA Microphones Compact Microphone Shock Mount
- Extra soft Rubber Mounts provides efficient absorption of any vibrations
- Can also be fitted with Rubber Mounts for both Ø 11-13 mm and Ø 16 mm microphones.
Special Order
You Pay:
$149.00
DPA Microphones Concealer for d:screet 4060/61/62/63/71
Hides the 4060 from plain view, ideal for stage performers etc.
In stock
Ships tomorrow
You Pay:
$44.95
DPA Microphones DMM0012 Miniature Concealer for DPA4060 Microphone
Hides the 4060 from plain view, ideal for stage performers etc.
Special Order
Usually ships in 2 - 3 weeks
You Pay:
$28.95
DPA Microphones DMM0014 Standard Lavalier Microphone Clip for 4080 Lavalier Microphone
Secures the 4080 lavalier microphone on left or right buttoned shirts.
Special Order
Usually ships in 2 - 3 weeks
You Pay:
$47.95
DPA Microphones DMM0509 Miniature Microphone Series Concealer / Holder for 4071 Microphone (5 pcs.)
Specifically sized for use with the 4071 miniature series microphones.
Special Order
Usually ships in 2 - 3 weeks
You Pay:
$129.00
DPA Microphones DUA0020 Small Windscreen for 19mm Microphones
- Designed to Fit
- In or Out
- Dark Grey
Special Order
You Pay:
$42.95
DPA Microphones DUA0041 Foam Windscreen for d:dicate Microphones with Active Cable
- Attenuates Wind and Pop Noises
- Protects Mic Capsule from Moisture
Special Order
Usually ships in 2 - 3 weeks
You Pay:
$45.95
DPA Microphones DUA4099 Foam Windscreen (5 Pack)
- Form fitting foam windscreen is made specifically for the 4099 Instrument Mic
Special Order
Usually ships in 2 - 3 weeks
You Pay:
$68.95
DPA Microphones DUA6001 - Grid Cap for DPA Miniature Series (Black) (5 Pieces)
Provides a 3dB soft boost around 8 - 20kHz, for DPA mini microphones.
Special Order
Usually ships in 2 - 3 weeks
You Pay:
$99.95
DPA Microphones DUA6017 - Soft Boost Grid Cap (Brown) (5 Pieces)
- Brown
- Soft Frequency Boost
- Package of Five
Special Order
Usually ships in 2 - 3 weeks
You Pay:
$99.95
DPA Microphones DUZ0002 Shock Mount Kit for d:vote 4099
- For DPA d:vote 4099 Microphone
- 2x Rubber Replacement Shock Mounts
- Includes Universal Clip
Special Order
You Pay:
$30.95
DPA Microphones GC4099 Guitar Mounting Clip for 4099 Microphone
Designed to mount the DPA 4099 onto guitars and dobros.
Special Order
Usually ships in 2 - 3 weeks
You Pay:
$71.95
DPA Microphones Gooseneck Shock Mount for d:dicate
The DPA Microphones Gooseneck Shock Mount for d:dictate can be used to mount a microphone on an instrument
Special Order
You Pay:
$179.00
DPA Microphones S5 Bundle - Surround/Decca Tree Mount
- For Surround Sound Recording Arrays.
- Suitable for d:dicate Surround Kits.
- Non-Light Reflective.
- Versatile and Expandable.
- Accommodates Several Microphone Holders.
Special Order
You Pay:
$3,999.00
DPA Microphones S5 Five Point Microphone Mount
- Surround Microphone Placement.
- 0.6 to 2m Microphone Spacing.
- Full Kit with Storage Case.
Special Order
You Pay:
$5,049.00
DPA Microphones SM4099 Stand Mount for d:vote 4099 Instrument Microphone
- 3/8" Thread
- 360° Turn-Around Top
- Supports 4099 Instrument Microphone
Special Order
You Pay:
$75.95
DPA Microphones STC4099 Saxophone Mounting Clip for 4099 Microphone
Designed to mount the DPA 4099 onto saxophones, trumpets, etc.
Special Order
Usually ships in 2 - 3 weeks
You Pay:
$78.95
DPA Microphones Subminiature Mesh for 6000 Series Lavalier Microphone
- For Use with DPA 6060 and 6061 Lav Mics
- Reduces Wind and Breath Noise by -20 dB
- Durable and Scratch Resistant
- Snaps Securely into Place on Lav Mic
- Replaces Cap Supplied with Microphone
Special Order
Usually ships in 2 - 3 weeks
You Pay:
$52.95
You Pay:
$179.00
DPA Microphones UA0896 Windscreen (19 Length 92 mm) Microphones
- Designed to Fit
- In or Out
Special Order
You Pay:
$34.95
DPA Microphones VC4099 Violin Mounting Clip for 4099 Microphone
Designed to mount the DPA 4099 onto violins, mandolins, banjos, etc.
In stock
Ships tomorrow
You Pay:
$86.95
DPA Microphones d:vote Gooseneck Lock for 4099 Instrument Microphone (5-Pack)
- For 4099 Instrument Microphones
- Secures Gooseneck on Mounting Clips
Special Order
Usually ships in 2 - 3 weeks
You Pay:
$47.95
DPA d:facto II Outer Grid and Assembly for Handheld Vocal Microphone (DUA0710)
- With Windscreen & Pop Filter Assembly
Special Order
You Pay:
$329.00
Deity Microphones S-95 Smart Battery
- For Wide Range of Smart Battery Gear
- 2054-Style Smart Battery
- Capacity: 6600mAh
- Rated Energy: 95Wh
- Nominal Voltage: 14.4V
- Onboard LED Battery Metre
In stock
Ships tomorrow
You Pay:
$249.00
Deity Microphones SPD-HR12V Regulated 12V 4-Pin Hirose to 4-Pin Hirose Cable
- Power Device from External DC Source
- For Hirose-Compatible Power Distros
- 12V Power Signal Regulator
- For Devices that Require Fixed 12V
Usually ships in 4 - 6 weeks
You Pay:
$66.95
Deity Microphones SPD-HR25 4-Pin Hirose to 2.5mm Locking DC Barrel Jack Cable
- Power Receiver from External Source
- Lectrosonics SR-Series with DC Plates
- Lectrosonics DCR822
- Zaxcom QRX 200
- Zaxcom QRX 100
Usually ships in 4 - 6 weeks
You Pay:
$43.95
Deity Microphones SPD-HR3U 4-Pin Hirose to Triple USB-C Cable
- DC Power to USB-C Devices in Audio Bag
- Power Three Devices Simultaneously
- Use with Hirose-Compatible Distro
- Deity, Sony, Zoom with USB-C Power
- Android Phones, iPads with USB-C
- 4-Pin Hirose Male Connector
Usually ships in 4 - 6 weeks
You Pay:
$72.95
Deity Microphones SPD-HRBATT 4-Pin Hirose to Hi-Q Battery Cup Smart DC/Data Power Cable
- 4-Pin Hirose-Compatible Powered Devices
- Battery Cup to 4-Pin Hirose Connector
- Provides Power & Battery Telemetry Data
Usually ships in 4 - 6 weeks
You Pay:
$79.95
Deity Microphones SPD-T4BATT TA4F to Hi-Q Battery Cup F Smart DC/Data Power Cable
- For SPD-1 Smart Power Distributor
- For TA4F-Compatible Powered Devices
- Holds a 2054 Smart Battery
- Battery Cup to TA4F Connector
- Provides Power & Battery Telemetry Data
Usually ships in 4 - 6 weeks
You Pay:
$79.95
Deity VO-7U Foam Pop Filter
Available to Order From Rubber Monkey Today
Usually ships in 4 - 6 weeks
You Pay:
$19.95
Eartec ULPBC Replacement Belt Clip for UltraPAK Transceiver
- For UltraPAK Beltpack Transceivers
- Ergonomic Shape
- Fits Natural Curve of the Body
- Spring-Loaded Belt Clip
Usually ships in 4 - 6 weeks
You Pay:
$16.95
Electro-Voice 320 Stand Clamp for RE20, RE27 and ND868 Microphones
Available to order today
Contact us for an ETA
You Pay:
$159.00
Electro-Voice 323S Soft Stand Clamp for 1" Diameter Microphones (Black)
Available to order today
Usually ships in 4 - 6 weeks
You Pay:
$119.00
Elgato Master Mount L Multi Mount
- Steel tubing and joints.
- Interchangeable bases and mounts.
- Telescopic monopod design.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$149.00
Elgato Wave Mic Arm LP
- Podcasting, Streaming, Broadcasting
- C-Clamp for Surface Mounting
- 29" Horizontal Reach
- 90° Up and 60° Down Arm Rotation
- Ball Head for Precise Positioning
- Internal Springs
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$229.00
Elgato Wave Pop Filter for Wave Series Microphones
- For Wave:1 and Wave:3 Microphones
- Reduces Breath and Plosive Noises
- Dual-Layer Steel Mesh
- Snaps On with Magnetic Attachment Points
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$69.00
GRAVITY GMS 3122 HDB Heavy Duty Mic Stand (Short)
Short Heavy Duty Microphone Stand with Folding Tripod Base
In stock
Ships tomorrow
You Pay:
$94.95
GRAVITY MS 4322 HDB Heavy Duty Mic Stand
Heavy Duty Microphone Stand, Tripod, 2-Point Telescopic Boom
Contact us for an ETA
You Pay:
$109.00
GRAVITY Microphone Stand Headphones-Mount Hanger
Microphone Stand Headphones-Mount Hanger
In stock
Ships tomorrow
You Pay:
$24.95
GRAVITY Universal G-Ring Pack (20, Power Purple)
A pack of coloured coding rings for all Gravity products
Contact us for an ETA
You Pay:
$12.95
Gator Cases Professional Broadcast Boom Mic Stand with LED Light
- Spring-Loaded Articulating Podcast Arm
- 3-Colour USB-Powered On-Air LED Light
- Removable 3 m XLR Cable
- Cable Management Channel
- 3" (2.75 cm) Extension Adapter Rotates Full 360°
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$349.00
Gator ROK-IT Nylon Pop Filter
- Quality pop filter keeps plosives at bay and vocal performance front and center
- Easy-to-mount filter is made from durable nylon
- Features an 11.5" gooseneck design with clamp, making it easy to position
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$43.95
General MCrane1 Microphone Suspension Crane Arm
- Spring-Loaded Suspension Arm
- Height Adjustable
- Forward and Backward Adjustable
- Supports Mic Shockmount and Holder
- Supports Microphone Pop Filter
Usually ships in 2 - 3 weeks
You Pay:
$73.95
Gravity GBGMS6B Transport Bag for Six Microphone Stands
Heavy duty carry bag
In stock
Ships tomorrow
You Pay:
$94.95
Gravity GMAPOP1 Pop Filter with VARI-ARM
- Award-Winning Design
- Protects Against Vocal Plosives
- Large 6.2" Screen Diameter
- Arm Allows Precise & Secure Positioning
- Central Locking Mechanism for All Joints
- 1.5 to 3.5cm Clamping Range
In stock
Ships tomorrow
You Pay:
$78.95
Gravity GMS2212B Short Microphone Stand with Telescoping Boom
- Heavy Duty Cast Iron Base
- Telescoping Boom Arm for Extra Length
- 1 Point Tilt for Quick, Reliable Adjustment
- ABS Coated Handle for Comfortable Use
- Includes Gravity Rings Pack
Contact us for an ETA
You Pay:
$65.95
Gravity GMS2222B Short Microphone Stand with Round Base (Black)
With 2-Point Adjustment Telescoping Boom
Special Order
You Pay:
$94.95
Gravity GMS23 Microphone Stand with Round Base (Black)
Premium quality microphone stand
In stock
Ships tomorrow
You Pay:
$72.95
Gravity GMS4222B Short Microphone Stand
Precision 2-point tilt and position adjustment
Stock due this week
You Pay:
$94.95
Gravity GMS4322B Microphone Stand with Folding Tripod Base (Black)
With 2-Point Adjustment Telescoping Boom
In stock
Ships tomorrow
You Pay:
$94.95
Gravity GMS4322W Microphone Stand with Folding Tripod Base (White)
- Adjustable Height of 103 to 168cm
- Boom Arm Telescopes up to 98cm
- 2-Point Positioning of Boom
- Zinc Die-Cast Tripod Base
- Rubber Caps on Feet
- Durable Steel Construction
In stock
Ships tomorrow
You Pay:
$109.00
Gravity GMS5311B Traveler Microphone Stand
- Lightweight construction
- 1-point boom adjustment
- Ergonomic handling
- Solid, steady, compact leg construction
- Solid and durable construction
In stock
Ships tomorrow
You Pay:
$47.95
Gravity GMSUCLMP Universal Microphone Clamp for Handheld Microphones
- Clamping range from 14 - 42 mm
- Set screw for adjusting the angle
- Strong clamping force
- EVA padded grip
- Suitable for round and conical mics
On Backorder
You Pay:
$11.95
Gravity GRP5555BLU2 G-Ring Universal Ring Pack (Deep Sky Blue)
Universal Ring Pack suitable for all Gravity products
Contact us for an ETA
You Pay:
$11.95
Gravity GRP5555RED1 G-Ring Universal Ring Pack (Lust Red)
Universal Ring Pack suitable for all Gravity products
Contact us for an ETA
You Pay:
$11.95
Gravity GRP5555YEL1 G-Ring Universal Ring Pack (Sunshine Yellow)
Universal Ring Pack suitable for all Gravity products.
Contact us for an ETA
You Pay:
$11.95
Gravity Large Drink Holder for Microphone Stands
- Drink holder for mic stands, speaker stands and music stands
- Securely holds bottles, cans, cups and glasses up to 90 mm in diameter
- Clamp adjustable for table top mounting, hex key included
Contact us for an ETA
You Pay:
$22.95