Booms & Wind Protection
K-Tek KP20CCR KlassicPro Graphite 6-Section Boompole with XLR Coiled Cable, Side Exit (6.1m)
- Measures 1.43 to 6.1m
- Six Locking Sections
- Lightweight Graphite Material
- Offers Increased Interchangeability
- Removable Headpiece
- Includes KPCK20 Coiled Cable Kit
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,649.00
K-Tek KP20TA Mighty Boom 6-Section Graphite Boompole with Coiled Cable & Transmitter Adapter (6.1m)
- 6 x Sections, Graphite, Extends to 6.1m
- Collapses to 1.43m
- Sidekick Attachment for Transmitter
- Removable Headpiece, Coiled Cable
- Strong, Rigid, Lightweight at 1.5kg
- Removable Rubber Bumper Bottom
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,649.00
Shure A89MW-Kit Windshield Kit
- For VP89 Medium Shotgun Microphone.
- Modular Windshield.
- High-Quality Synthetic Fur Windjammer.
- Lyre Suspension System.
Special Order
You Pay:
$2,549.00
K-Tek KA-113CCR 6-Section Articulated Boom Pole
- 2.5' (76.2cm) to 9.5' (289.56cm)
- 3-pin XLR Connection
- Coiled Cable
- Side Exit XLR Connection
- 6-Articulating Sections
- 5-Locking Positions
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,549.00
K-Tek KP20FT Mighty Boom 6-Section Boompole w/ Straight Cable & Flow-Through Bottom Module (6.2m)
- 6 x Sections, Graphite, Extends to 6.2m
- Collapses to 1.5m
- Straight Cable/Right-Angle XLR Connector
- Bottom Module with Flow-Through
- Removable Headpiece
- Strong, Rigid, Lightweight at 1.4kg
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,449.00
K-Tek KP18VCCR Mighty Boom 5-Section Graphite Boompole with Coiled Cable and XLR Side Exit (5.5m)
- 5 x Sections, Graphite, Extends to 5.5m
- Collapses to 1.5m
- Coiled Cable, Right-Angle XLR Connector
- Bottom Module with XLR Side Exit
- Removable Headpiece
- Strong, Rigid, Lightweight at 1.4kg
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,449.00
K-Tek KP16CCR KlassicPro Graphite 6-Section Boompole w/ Internal XLR Coiled Cable, Side Exit (4.8m)
- Measures 1.1 to 5m
- Six Locking Sections
- Lightweight Graphite Material
- Offers Increased Interchangeability
- Removable Headpiece
- Includes KPCK16 Coiled Cable Kit
Usually ships in 2 - 3 weeks
You Pay:
$2,399.00
K-Tek KP20 KlassicPro Graphite 6-Section Boompole (Uncabled, 6.1m)
- Measures 1.37 to 6.1m
- Six Locking Sections
- Lightweight Graphite Material
- Offers Increased Interchangeability
- Removable Headpiece
- Removable Bottom Bumper
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,099.00
K-Tek KP12CCR 12' KlassicPro Graphite 6-Section Boompole with Internal XLR Coiled Cable, Side Exit
- Measures 1.03m to 3.75m
- Six Locking Sections
- Lightweight Graphite Material
- Offers Increased Interchangeability
- Removable Headpiece
- Includes KPCK12 Coiled Cable Kit
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,099.00
K-Tek KP10VCCR Mighty Boom 5-Section Graphite Boompole with Coiled Cable and XLR Side Exit
- 5 x Sections, Graphite, Extends to 3.1m
- Collapses to 97.8cm
- Coiled Cable, Right-Angle XLR Connector
- Bottom Module with XLR Side Exit
- Removable Headpiece
- Strong, Rigid, Lightweight at 1.1kg
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,919.00
K-Tek KP16 KlassicPro Graphite 6-Section Boompole (Uncabled, 4.87m)
- Measures 1.12 to 4.87m
- Six Locking Sections
- Lightweight Graphite Material
- Offers Increased Interchangeability
- Removable Headpiece
- Removable Bottom Bumper
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,839.00
K-Tek KP9CCR 9' KlassicPro Graphite 6-Section Boompole with Internal XLR Coiled Cable, Side Exit
- Measures 0.8m to 2.8m
- Six Locking Sections
- Lightweight Graphite Material
- Offers Increased Interchangeability
- Removable Headpiece
- Includes KPCK9 Coiled Cable Kit
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,819.00
Rycote Stereo Windshield WS AE ORTF Kit
- For Capturing Stereo Audio in ORTF
- Protects Audio Integrity in the Field
- Includes Suspension for ORTF Miking
- Includes Connbox for Reducing Noise
- Includes Windshield & Windjammer
- Windshield Protects Against Noise
Usually ships in 1 - 2 weeks
You Pay:
$1,739.00
K-Tek KEG-150CCR Avalon Series Graphite Boompole with Internal Coiled XLR Cable
- Measures 99.1 to 381 cm
- Five Locking Sections
- Side 3-Pin XLR Connection
- Lightweight Graphite Design
- Captive-Collet Coupling System
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,719.00
K-Tek KEG-150CC Avalon Series Graphite Boompole with Internal Coiled XLR Cable
The K-Tek KEG-150CC Avalon Series Graphite Boompole provides a moderat
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,619.00
K-Tek KP12 KlassicPro Graphite 6-Section Boompole (Uncabled, 3.6m)
- Measures 0.9 to 3.65m
- Six Locking Sections
- Lightweight Graphite Material
- Offers Increased Interchangeability
- Removable Headpiece
- Removable Bottom Bumper
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,569.00
K-Tek KP6CCR 1.8m KlassicPro Graphite 6-Section Boompole with Internal XLR Coiled Cable, Side Exit
- Measures 0.6 to 1.9m
- Six Locking Sections
- Lightweight Graphite Material
- Offers Increased Interchangeability
- Removable Headpiece
- Includes KPCK6 Coiled Cable Kit
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,529.00
Tilta Zombie Rig Boompole Support System
- Improved comfort
- 360° bracket
- Universal design
- Baby pin connection
- Carry bag included
Usually ships in 2 - 4 weeks
You Pay:
$1,519.00
K-Tek KP10V Mighty Boom 5-Section Graphite Boompole (Uncabled, 3m)
- 5 x Sections, Graphite, Extends to 3m
- Collapses to 0.8m
- Removable Headpiece, No Cable
- Strong, Rigid, Lightweight at 680g
- Removable Rubber Bumper Bottom
- Sure-Grip Oval Divots
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,429.00
K-Tek KEG-100CCR Avalon Series Graphite Boompole with Internal Coiled XLR Cable
- Measures 73.6 to 267 cm
- Five Locking Sections
- Side 3-Pin XLR Connection
- Lightweight Graphite Design
- Captive-Collet Coupling System
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,399.00
Rycote Nano Shield Windshield Kit NS1-BA for Microphones up to 122mm Long
- Complete Windshield & Suspension System
- Improved Acoustic Transparency
- 30% Lighter than Modular Windshield Kits
- Smaller than Modular Windshield Kits
- Mix-and-Match Basket Design
Usually ships in 1 - 2 weeks
You Pay:
$1,349.00
Rycote Nano Shield Windshield Kit NS5-DC for Microphones up to 285mm Long
- Complete Windshield & Suspension System
- Improved Acoustic Transparency
- 30% Lighter than Modular Windshield Kits
- Smaller than Modular Windshield Kits
- Mix-and-Match Basket Design
Usually ships in 1 - 2 weeks
You Pay:
$1,349.00
Rycote Nano Shield Windshield Kit NS0-AA for Microphones up to 59mm Long
- Complete Windshield & Suspension System
- Improved Acoustic Transparency
- 30% Lighter than Modular Windshield Kits
- Smaller than Modular Windshield Kits
- Mix-and-Match Basket Design
Usually ships in 1 - 2 weeks
You Pay:
$1,349.00
Rycote Nano Shield Windshield Kit NS6-DD for Microphones up to 315mm Long
- Complete Windshield & Suspension System
- Improved Acoustic Transparency
- 30% Lighter than Modular Windshield Kits
- Smaller than Modular Windshield Kits
- Mix-and-Match Basket Design
Usually ships in 1 - 2 weeks
You Pay:
$1,349.00
Rycote Nano Shield Windshield Kit NS3-CB for Microphones up to 202mm Long
- Complete Windshield & Suspension System
- Improved Acoustic Transparency
- 30% Lighter than Modular Windshield Kits
- Smaller than Modular Windshield Kits
- Mix-and-Match Basket Design
Usually ships in 1 - 2 weeks
You Pay:
$1,349.00
Rycote Nano Shield Windshield Kit NS4-DB for Microphones up to 256mm Long
- Complete Windshield & Suspension System
- Improved Acoustic Transparency
- 30% Lighter than Modular Windshield Kits
- Smaller than Modular Windshield Kits
- Mix-and-Match Basket Design
Usually ships in 1 - 2 weeks
You Pay:
$1,349.00
Rycote Nano Shield Windshield Kit NS2-CA for Microphones up to 155mm Long
- Complete Windshield & Suspension System
- Improved Acoustic Transparency
- 30% Lighter than Modular Windshield Kits
- Smaller than Modular Windshield Kits
- Mix-and-Match Basket Design
Usually ships in 1 - 2 weeks
You Pay:
$1,349.00
K-Tek KEG-100CC Avalon Series Graphite Boompole with Internal Coiled XLR Cable
- Measures 65.8 to 267 cm
- Five Locking Sections
- Bottom 3-Pin XLR Connection
- Lightweight Graphite Design
- Captive-Collet Coupling System
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,349.00
Rycote Windshield Kit 416 for Shotgun Microphones
Basket-Style 36.8 cm Windshield, Patented Lyre Technology Noise Reduction, Rubberized 72-Shore, Non-Slip Lyres, RF-Shielded Female XLR Cable
Usually ships in 1 - 2 weeks
You Pay:
$1,069.00
K-Tek KE-110CC Aluminum Boom Pole and Alfa Boom Tube Case Kit
- Suitable for Broadcast, Film, and ENG
- 0.8 to 2.8 m Aluminium Boom Pole & Cable
- Internal Coiled Cable with Bottom Exit
- Lockable Boom Tube Case Fits 16-32" Pole
Usually ships in 2 - 3 weeks
You Pay:
$1,029.00
K-Tek KE-144CCR Avalon Series Aluminum Boompole
- Internal Coiled Cable
- Side XLR Connection
- 5 Locking Sections
- Captive-Collet Coupling System
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$829.00
Rycote Suspension Large (XLR-3F) 72 Duo
Available to order from Rubber Monkey today
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$809.00
K-Tek KEG-100 Avalon Series Graphite Boompole (Uncabled)
- Measures 66 to 267 cm
- 5 Locking Sections
- Lightweight Graphite Design
- Captive-Collet Coupling System
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$799.00
K-Tek KE-144CC Avalon Series Aluminum Boompole
- Measures 99 to 365 cm
- Internal Coiled Cable
- Bottom XLR Connection
- 5 Locking Sections
- Captive-Collet Coupling System
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$759.00
K-Tek KE-110CCR Avalon Series Aluminum Boompole with Internal XLR Cable
- Measures 0.9 to 2.8 m
- Five Locking Sections
- Internal Coiled Cable
- Side XLR Connection
- Captive-Collet Coupling System
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$759.00
Rycote Super-Shield Kit for Shotgun Mics (Medium)
For Shotgun Microphones 20-25cm in Length
Usually ships in 1 - 2 weeks
You Pay:
$749.00
Rycote Super-Shield Kit for Shotgun Mics (Small)
For Shotgun Microphones up to 20cm in Length
Usually ships in 1 - 2 weeks
You Pay:
$749.00
Sennheiser MZS20 Suspension and Pistol Grip
A shock mount for MKH microphones in conjunction with MZW windshields.
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$749.00
K-Tek KE-89CC Avalon Boom Pole with Internal XLR Cable and BoomTube Case Kit
- 2.3 m Boom Pole and Integrated XLR Cable
- Lockable BoomTube Case
- Sturdy, Lightweight and Portable
- Prevents Intrusion of Dust and Moisture
Usually ships in 2 - 3 weeks
You Pay:
$749.00
K-Tek KE-79CCR Traveler Aluminum Boompole with Internal Coiled XLR Cable (Right Angled)
- Avalon Series
- Measures 0.54 - 2.04 m
- 6 Locking Sections
- Internal Coiled Cable
- Right Angled XLR Connection
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$749.00
K-Tek Airo Booming Intro Kit 1
- Telescopic Boompole
- Rubber Collar Grips
- High-Quality 3-Pin XLR Cable
- Suitable for Boompoles
- Faux Fur Fuzzy Windscreen
- Provides Optimal Wind Noise Reduction
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$749.00
K-Tek KE-110CC Avalon Series Aluminum Boompole with Internal XLR Cable
- Measures 0.8 to 2.8 m
- Five Locking Sections
- Internal Coiled Cable
- Bottom XLR Connection
- Captive-Collet Coupling System
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$699.00
K-Tek KE-79CC Traveler Avalon Series Aluminum Boompole with Internal XLR Cable
- Measures 0.5 to 2.0 m
- Six Locking Sections
- Internal Coiled Cable
- Bottom XLR Connection
- Captive-Collet Coupling System
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$679.00
K-Tek KE-144 Avalon Series Aluminum Boompole (Uncabled)
- Measures
- Five Locking Sections
- Captive-Collet Coupling System
- Made in the USA
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$659.00
K-Tek KE-110 Avalon Series Aluminum Boompole (Uncabled)
- Measures 0.8 to 2.8 m
- Five Locking Sections
- Captive-Collet Coupling System
- Made in the USA
Usually ships in 2 - 3 weeks
You Pay:
$609.00
Sennheiser MZW-201 Blimp Windscreen
- For Sennheiser MKH20 / 30 / 40 / 50 Microphones
Usually ships in 4 - 6 weeks
You Pay:
$599.00
Rycote 104401 18cm Standard Hole SGM Foam (10-Pack)
Foam windscreen is designed to avoid high-frequency roll-off
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$559.00
Sennheiser MZW70 Basket Windshield
- Lightweight
- Protective basket windshield
- Suppresses wind noise
- Ideal in outdoor applications
Usually ships in 4 - 6 weeks
You Pay:
$559.00
Sennheiser MZW60 Basket Windshield
- For Outdoor Applications
- Lightweight
- Rugged Protective Basket
- Suppresses Wind Noise
Usually ships in 4 - 6 weeks
You Pay:
$519.00
K-Tek KE-89 Avalon Series Aluminum Boompole (Uncabled)
- Measures 0.8 to 2.2 m
- Four Locking Sections
- Captive-Collet Coupling System
- Made in the USA
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$459.00
K-Tek KE-69CC Avalon Series Aluminium Boompole with Internal XLR Cable
- Measures 71cm to 1.75m
- Three Locking Sections
- Internal Coiled Cable
- Bottom XLR Connection
- Captive-Collet Coupling System
- Made in the USA
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$449.00
Rycote Classic Softie with Lyre Mount and Pistol-Grip Kit (150mm, 18 to 20mm Diameter Hole)
- For Wind-Noise Attenuation
- Pistol-Grip-Style Mount
- Includes 15.7" XLR Jumper Cable
- Includes InVision Lyre Suspension
- Easily Mounts to a Boompole or Stand
Usually ships in 1 - 2 weeks
You Pay:
$439.00
Rycote Classic Softie with Lyre Mount and Pistol-Grip Kit (120mm, 18 to 20mm Diameter Hole)
- Up to 30 dB Max Wind Noise Attenuation
- Windjammer Included
- Softie Lyre Mount & Pistol Grip Included
- 16" XLR Mic Cable is Included
Usually ships in 1 - 2 weeks
You Pay:
$439.00
K-Tek KE-89CC Avalon Series Aluminum Boompole with Internal Coiled XLR Cable
Measures 2' 5"-7' 2" (0.76-2.19m), 4 Locking Sections
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$419.00
K-Tek K-BC Boom Pole Cradle Support for C and Microphone Stands
- Holder mount for your boompole
- Two cradles cushions the pole
- Isolate the pole from vibration
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$409.00
Shure A89MW-SFT Softie Windshield
Provides 25 dB of wind protection in harsh environments without adverse effects on high frequency with the VP89M End-Address Shotgun Condenser Mic.
Special Order
You Pay:
$409.00
Rode V2 Blimp System
- Protection from Wind Noise
- Isolates From Shock and Vibration
- Fits NTG1, NTG2, NTG3, NTG4 and NTG4+
- Fits Any Shotgun Mic up to 32.4 cm
- Integrated Mogami Mic Cable
Usually ships in 4 - 6 weeks
You Pay:
$409.00
Rycote Classic-Softie Camera Kit for Shotgun Microphones (15cm)
An all-in-one kit for using your camera mounted shotgun microphone
Usually ships in 1 - 2 weeks
You Pay:
$399.00
K-Tek KPTA Sidekick Plug-On Transmitter Adapter for KlassicPro Boompoles
- Attach Plug-On Transmitter to KlassicPro
- Modular Attachment, No Soldering Needed
- Requires KPCK Cable Kit for KlassicPro
- Works with Any Plug-On Transmitter
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$389.00
Rode Boompole Pro, Carbon Fibre Boom Pole (3m)
- Suitable for Shotgun Microphones
- Lightweight
- Extends from 0.85 m to 3 m
- Five Sections
- Intuitive Twist-Lock Mechanic
Usually ships in 4 - 6 weeks
$409.00
You Pay:
$389.00
$409.00
Rycote Classic Softie with Lyre Mount and Pistol-Grip Kit (178mm, 18 to 20mm Diameter Hole)
- For Wind-Noise Attenuation
- Pistol-Grip-Style Mount
- Includes 15.7" XLR Jumper Cable
- Includes InVision Lyre Suspension
- Easily Mounts to a Boompole or Stand
Usually ships in 1 - 2 weeks
You Pay:
$389.00
Sennheiser MZH70 Windjammer
Use in conjunction with MZW70 for maximum wind noise protection.
Usually ships in 4 - 6 weeks
You Pay:
$369.00
K-Tek KE-69 Avalon Series Aluminum Boompole (Uncabled)
- Measures 0.7 to 1.8 m
- Three Locking Sections
- Captive-Collet Coupling System
- Made in the USA
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$369.00
K-Tek KPCCR CCR Module for KlassicPro Boompole
- Bottom Attachment to KlassicPro Boompole
- Male 3-Pin XLR Side Exit
- Removable Rubber Bumper
- No Soldering Required
- Acts as Counterweight of 0.55 Pounds
- Cable Kit for Boompole Required
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$359.00
Bubblebee Industries Windbubbles All-Stars Faux-Fur Windscreens for 8 to 13mm Lav Mics (10-Pack)
- World-renowned protection from wind
- Natural sound
- Multi-pile fur
- Quality you can trust
Usually ships in 1 - 2 weeks
You Pay:
$349.00
Bubblebee Industries Windbubbles All-Stars Faux-Fur Windscreens for 5 to 9mm Lav Mics (10-Pack)
- World-renowned protection from wind
- Natural sound
- Multi-pile fur
- Quality you can trust
Usually ships in 1 - 2 weeks
You Pay:
$349.00
Bubblebee Industries Windbubbles All-Stars Faux-Fur Windscreens for 5 to 8mm Lav Mics (10-Pack)
- World-renowned protection from wind
- Natural sound
- Multi-pile fur
- Quality you can trust
Usually ships in 1 - 2 weeks
You Pay:
$349.00
Bubblebee Industries Windbubbles All-Stars Faux-Fur Windscreens for 3 to 4mm Lav Mics (10-Pack)
- World-renowned protection from wind
- Natural sound
- Multi-pile fur
- Quality you can trust
Usually ships in 1 - 2 weeks
You Pay:
$349.00
Rycote Portable Recorder Audio Kit for Tascam DR-07 MKII
Windshield and Suspension Mount
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$339.00
Rycote 15cm Super-Softie Wind Shield for Shotgun Mics
For Mics Up to 15cm Long & 19-22mm Diam
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$339.00
Rycote 12cm Super-Softie Wind Shield for Shotgun Mics
For Mics Up to 12cm Long & 19-22mm Diameter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$339.00
Saramonic VWS Windshield and Suspension System for Shotgun and Pencil Microphones
- Enables Clean Audio in Extreme Weather
- Holds One Shotgun or Pencil Microphone
- For 0.75 to 0.91" Microphone Diameters
- Accommodates Mic Lengths up to 14.9"
Usually ships in 2 - 4 weeks
You Pay:
$339.00
Zacuto Micro-BOOM Boom Pole
- Lightweight at 170g
- Carbon fibre construction
- Adjustable length and angle
- Internally foiled cable
- Telescoping boom
- Cold shoe/NATO compatible
On Backorder
You Pay:
$329.00
Rycote Softie-Lite Fur Screen Kit (2.1cm)
- INV-Lite Shock-mount
- Softie-Lite 1.9cm
- Shortie XLR Jumper Cable
- Includes Integrated XLR Holder
Usually ships in 1 - 2 weeks
You Pay:
$309.00
Rycote Softie-Lite Fur Screen Kit (1.9cm)
- INV-Lite Shock-mount
- Softie-Lite 1.9cm
- Shortie XLR Jumper Cable
- Includes Integrated XLR Holder
Usually ships in 1 - 2 weeks
You Pay:
$309.00
Sennheiser MZH60 Windjammer
Use in conjunction with MZW60 for maximum wind noise protection.
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$309.00
Deity Microphones Boom Pole (2.6m)
- Super Lightweight
- 2.6m Long When Fully Extended
- Carbon Fiber Tubes
- Includes Rigid Travel Case
In stock
Ships tomorrow
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Cover System for Shotgun Mics (Black, Big Mount)
- Reduces Wind Noise
- Fits Microphones 23 to 26mm in Diameter
- 180mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Cover System for Shotgun Mics (Black, Extra-Large)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 180mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Shotgun Mics (Black, Large)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 155mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Bubble Windshield & Fur Cover System for Shotgun Mics (Black, Medium)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 130mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Shotgun Mics (Black, Small)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 105mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Windshield & Fur Cover for Shotgun Mics (Black, Extra-Small/Big Mount)
- Reduces Wind Noise
- Fits Microphones 23 to 26mm in Diameter
- 55mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bubblebee Industries Spacer Windshield & Fur Cover for Small-Diaphragm Mics (Black, Extra-Small)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 55mm Inner Depth
- The Spacer Bubble Windshield
- The Long-Haired Fur Cover
- Acoustically Transparent Design
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Rycote 18cm Super-Softie Wind Shield for Shotgun Mics (Standard Hole)
- Wind Noise Protection for Shotgun Mics
- For Mics Up to 18cm Long & 19-22mm Diam
- 3D-Tex Material and Open-Cell Foam
- Slip-On Design
- High Immunity to Rain-Soaking
Usually ships in 1 - 2 weeks
You Pay:
$289.00
Rycote Windjammer 10 for WS10 Windshield
- Fits WS10 Windshield
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$289.00
Rycote Windjammer for Rode Blimp Windshield & Suspension System
The Highest Possible Protection against Extreme Wind-Noise.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$279.00
Rycote Lavalier Adhesive Stickies (500 Roll)
Suitable for Lavalier Microphones, Mounts to Skin or Clothing
Usually ships in 1 - 2 weeks
You Pay:
$269.00
Orca Hardshell Boompole Case (Extra Large)
Keep your boompole snug and safe with the extra-large Hardshell Boompole Case from Orca.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$269.00
Ulanzi FALCAM Geartree Desk Mount Stand (Drill Style)
Ulanzi FALCAM Geartree Desk Mount Stand (Drill Style)
In stock
Ships tomorrow
You Pay:
$269.00
Ulanzi FALCAM Geartree Desk Mount Stand with C-Clamp
Ulanzi FALCAM Geartree Desk Mount Stand with C-Clamp
In stock
Ships tomorrow
You Pay:
$269.00
Rycote BBG Basket Windshield (25mm)
- Great windshielding, in a smaller package
- Perfect for hand-held operations and interviews
- Optional Windjammer available for windiest conditions
Usually ships in 1 - 2 weeks
You Pay:
$269.00
Rycote BBG Windshield (22mm)
- Great windshielding, in a smaller package
- Perfect for hand-held operations and interviews
- Optional Windjammer available for windiest conditions
Usually ships in 1 - 2 weeks
You Pay:
$269.00
Rycote BBG Basket Windshield (21mm)
For 21mm Diameter Microphones, Ideal for Neumann KM100 Series, For Handheld Operations and Interviews
Usually ships in 1 - 2 weeks
You Pay:
$269.00
Rycote BBG Basket Windshield
- Great windshielding, in a smaller package
- Perfect for hand-held operations and interviews
- Optional Windjammer available for windiest conditions
In stock
Ships tomorrow
You Pay:
$269.00
Rycote 5cm Super-Softie Windshield with 3D-Tex (19/22)
- Slip on Windshield
- Specially designed 3D-Tex® material
- Ease of maintenance and long-term reliability
- Unique aerodynamic shape
Usually ships in 1 - 2 weeks
You Pay:
$269.00
Sennheiser MZW71 Windscreen
Protects against external noise - designed for the MKH70 microphone.
Usually ships in 4 - 6 weeks
You Pay:
$259.00
ORCA OR-45 Boom Pole Quick Release
- Attaches to Any Boom pole
- Provides Fast Detaching of Microphone
- Simple Pull-Down Spring Operation
- Includes 3/8" Male Connector
- Red Collar
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$249.00
Rycote Standard Hole Classic Softie Wind-Screen (150mm Long, 18 to 20mm Diameter Hole, Gray)
- Measures 150mm Long
- Standard Hole Diameter 18 to 20mm
Usually ships in 1 - 2 weeks
You Pay:
$249.00
Rycote Standard Hole Classic Softie Wind-Screen (99mm Long, 18 to 20mm Diameter Hole, Gray)
- Measures 99mm Long
- Standard Hole Diameter 18 to 20mm
Usually ships in 1 - 2 weeks
You Pay:
$249.00
K-Tek Airo Fuzzy Windscreen for Lavalier Microphone (White, 25-Pack)
- Reduces Wind and Breath Noise
- Faux Fur Material Ideal for Outdoor Use
- Protects against Rustling/Handling Noise
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$239.00
K-Tek Airo Fuzzy Windscreen for Lavalier Microphone (Grey, 25-Pack)
- Reduces Wind and Breath Noise
- Faux Fur Material Ideal for Outdoor Use
- Protects against Rustling/Handling Noise
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$239.00
K-Tek Airo Fuzzy Windscreen for Lavalier Microphone (Black, 25-Pack)
- Reduces Wind and Breath Noise
- Faux Fur Material Ideal for Outdoor Use
- Protects against Rustling/Handling Noise
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$239.00
Shure A89LW Foam Windscreen (Large)
- For VP89 Large Shotgun Microphone.
- Replacement Foam Windscreen.
Special Order
You Pay:
$239.00
Rycote PCS-Boom Quick Release System
Universal 3/8"-16 Compatibility, Simple 'Click-In' Attachment Mechanism, Noise-Free When Connected, Fits Any Mic Shockmount with 3/8" Thread
Usually ships in 1 - 2 weeks
You Pay:
$229.00
Sony ADKIT77 ECM-77 Accessory Kit
- For ECM-77 Lavalier Microphone
- Includes all the accessories you need
Usually ships in 4 - 6 weeks
You Pay:
$229.00
Sony ADC88 6-Piece Foam Windscreen Set (Colour Mix)
- Reduces noise
- Mixed colours
- Foam windscreen set
- For Sony ECM-88 Series
Usually ships in 4 - 6 weeks
You Pay:
$229.00
Rycote INV-BH InVision Microphone Suspension
For Stand and Boompole Mounting
Usually ships in 1 - 2 weeks
You Pay:
$219.00
Rycote Standard Hole Softie Windscreen (19-22mm)
For Microphones with Diameters from 19-22mm
Usually ships in 1 - 2 weeks
You Pay:
$219.00
Rode Microphone Boompole
Boompole for NTG-1, NTG-2 & Video Mic - Extends 84cm (33") to 3m (10')
Usually ships in 4 - 6 weeks
You Pay:
$219.00
Rycote Standard Hole Classic Softie Wind-Screen (240mm Long, 18 to 20mm Diameter Hole, Gray)
- Measures 240mm Long
- Standard Hole Diameter 18 to 20mm
Usually ships in 1 - 2 weeks
You Pay:
$219.00
Rycote Standard Hole Classic Softie Wind-Screen (120mm Long, 18 to 20mm Diameter Hole, Gray)
- Measures 120mm Long
- Standard Hole Diameter 18 to 20mm
Usually ships in 1 - 2 weeks
You Pay:
$219.00
K-Tek Windscreen Slip-On Windscreen (Extra Short)
- Faux Fur
- For 17 to 25mm Diameter Mics
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
K-Tek Zeppelin Slip-On Windscreen (Long)
- Faux Fur
- For 17 to 25mm Diameter Mics
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
K-Tek Fuzzy Slip-on Windscreen for Sennheiser ME64 Microphone
- Fits Sennheiser ME64 Microphone
- Length: 12.70cm
- Faux Fur Protects Against Wind Noise
- Tightly Woven Fabric Backing
- Open Cell Foam Body
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
K-Tek Fuzzy Slip-on Windscreen for Sennheiser ME66 Microphone
- Fits Sennheiser ME66 Microphone
- Length: 19.05cm
- Faux Fur Protects Against Wind Noise
- Tightly Woven Fabric Backing
- Open Cell Foam Body
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
K-Tek Fuzzy Slip-on Windscreen for Sennheiser MKH8060 Microphone
- Fits Sennheiser MKH8060 Microphone
- Length: 12.70cm
- Faux Fur Protects Against Wind Noise
- Tightly Woven Fabric Backing
- Open Cell Foam Body
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
K-Tek Fuzzy Slip-on Windscreen for Rode NTG2 Microphone
- Fits Rode NTG2 Microphone
- Length: 15.24cm
- Faux Fur Protects Against Wind Noise
- Tightly Woven Fabric Backing
- Open Cell Foam Body
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
Orca OR-434 Large Boom Pole Hard Shell Case
- Unique thermoforming technology
- Padded interior
- Detachable shoulder strap
- Secured with two hook and loop straps
Usually ships in 2 - 3 weeks
You Pay:
$209.00
AKG H30 Universal Shock Mount
Universal Shock Mount for a Variety of Microphones
Usually ships in 4 - 6 weeks
You Pay:
$199.00
Rycote Standard Hole Classic Softie Wind-Screen (180mm Long, 18 to 20mm Diameter Hole, Gray)
- Measures 180mm Long
- Standard Hole Diameter 18 to 20mm
In stock
Ships tomorrow
$219.00
You Pay:
$198.00
$219.00
Orca OR-17 Magnet Boom Pole Holder
Safely attach and release your boom pole with a strong magnet
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$189.00
Rode Mini Boompole
Compact Microphone Boom Pole for Remote Audio Capturing
Usually ships in 4 - 6 weeks
You Pay:
$189.00
Sony ADR88B - Set of 12 Black Urethane Windscreens for ECM88 Microphone
- For the Sony ECM88 microphone
- 12 replacement windscreens
- Urethane windscreens
Usually ships in 4 - 6 weeks
You Pay:
$189.00
Rycote Softie Lyre Mount with Pistol Grip
- Fits 19 to 34mm Diameter Mics
- Fits MKH Microphones
- Includes Lyre Mount
Usually ships in 1 - 2 weeks
You Pay:
$189.00
Rycote InVision USM-VB Universal Microphone Shock-Mount
For Large Diaphragm Studio Microphones, Load Capacity: 1.98lb (900g)
Usually ships in 1 - 2 weeks
You Pay:
$179.00
Rode Micro Boompole Pro Ultra-Lightweight Modular Boom Pole (7')
- For the VideoMicro Microphone
- Modular with 3-Sections
- Lightweight
Usually ships in 4 - 6 weeks
You Pay:
$179.00
Bubblebee Industries Big Windbubble Windscreen for Handheld Microphones (Short-Haired)
- One standard size
- Elastic opening
- Maintain sound transparency
- Easy to use
Usually ships in 1 - 2 weeks
You Pay:
$179.00
Bubblebee Industries Big Windbubble Windscreen for Handheld Microphones (Long-Haired)
- One standard size
- Elastic opening
- Maintain sound transparency
- Easy to use
Usually ships in 1 - 2 weeks
You Pay:
$179.00
Rycote Overcovers Advanced, Fur Discs for Lavalier Microphones (100-Pack, Black)
Suitable for Lavalier Microphones, High-Quality Fur (No Stickies)
Usually ships in 1 - 2 weeks
You Pay:
$169.00
Bubblebee Industries Windbubbles United Furry Windbubbles for Lav Mics 8 to 13mm (4-Pack)
- Black, Brown, Grey, & White Colours
- Reduces Vocal Plosives
- Reduces Wind Noise
- Easy to Mount on Microphone
- Built with Imitation Fur
Usually ships in 1 - 2 weeks
You Pay:
$169.00
Bubblebee Industries Windbubbles United Furry Windbubbles for Lav Mics 5 to 9mm (4-Pack)
- Black, Brown, Grey, & White Colours
- Reduces Vocal Plosives
- Reduces Wind Noise
- Easy to Mount on Microphone
- Built with Imitation Fur
Usually ships in 1 - 2 weeks
You Pay:
$169.00
Bubblebee Industries Windbubbles United Furry Windbubbles for Lav Mics 5 to 8mm (4-Pack)
- Black, Brown, Grey, & White Colours
- Reduces Vocal Plosives
- Reduces Wind Noise
- Easy to Mount on Microphone
- Built with Imitation Fur
Usually ships in 1 - 2 weeks
You Pay:
$169.00
Bubblebee Industries Windbubbles United Furry Windbubbles for Lav Mics 3 to 4mm (4-Pack)
- Black, Brown, Grey, & White Colours
- Reduces Vocal Plosives
- Reduces Wind Noise
- Easy to Mount on Microphone
- Built with Imitation Fur
Usually ships in 1 - 2 weeks
You Pay:
$169.00
BOYA BY-PB25 Universal Carbon Fiber Boompole with internal XLR cable (2.5m)
- Lightweight Carbon Fibre Construction
- 3 x Telescoping Sections
- 1m to 2.5m Adjustable Length
- Internal Coiled Cable
- Bottom 3-Pin Male XLR Connection
In stock
Ships tomorrow
You Pay:
$169.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Red, XL)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Extra-Large
- Fits Spacer Bubble Extra-Large/Big Mount
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Red, Large)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Large
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Red, Medium)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Medium
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Red, Small)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Small
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Red, XS)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Extra-Small
- Fits Spacer Bubble Extra-Small/Big Mount
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Blue, XL)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Extra-Large
- Fits Spacer Bubble Extra-Large/Big Mount
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Blue, Large)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Large
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Blue, Medium)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Medium
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Blue, Small)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Small
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Blue, XS)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Extra-Small
- Fits Spacer Bubble Extra-Small/Big Mount
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Green, XL)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Extra-Large
- Fits Spacer Bubble Extra-Large/Big Mount
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Green, Large)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Large
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Green, Medium)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Medium
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Green, Small)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Small
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Green, XS)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Extra-Small
- Fits Spacer Bubble Extra-Small/Big Mount
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Black, XL)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Extra-Large
- Fits Spacer Bubble Extra-Large/Big Mount
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Black, Large)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Large
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Black, Medium)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Medium
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Black, Small)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Small
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Black, XS)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Extra-Small
- Fits Spacer Bubble Extra-Small/Big Mount
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Short Fur Slip-On Wind Protector for 23 to 26mm Mics (XL, Black)
- For 180mm Long Microphones
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Short Fur Slip-On Wind Protector for 18 to 24mm Mics (XL, Black)
- For 180mm Long Microphones
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Short Fur Slip-On Wind Protector for 18 to 24mm Mics (Large, Black)
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Short Fur Slip-On Wind Protector for 18 to 24mm Mics (Medium, Black)
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Short Fur Slip-On Wind Protector for 18 to 24mm Mics (Small, Black)
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Short Fur Slip-On Wind Protector for 23 to 26mm Mics (XS, Black)
- For 55mm Long Microphones
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Short Fur Slip-On Wind Protector for 18 to 24mm Mics (XS, Black)
- For 55mm Long Microphones
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 23 to 26mm Mics (XL, Black)
- For 180mm Long Microphones
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (XL, Black)
- For 180mm Long Microphones
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Large, Black)
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Medium, Black)
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Small, Black)
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 23 to 26mm Mics (XS, Black)
- For 55mm Long Microphones
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (XS, Black)
- For 55mm Long Microphones
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Rycote InVision INV-HG mkIII Microphone Suspension - Lyre Shockmount
Accommodates most microphones measuring 19 to 34mm in diameter
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Rycote InVision Video Hot Shoe Adapter
Eliminates camera motor noise for cameras with a hot shoe
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Sennheiser MZW61 Windscreen
Protects against external noise - designed for the MKH60 microphone.
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$159.00
Shure Fur Windjammer for VP83 and VP83F LensHopper Microphones
- Synthetic Fur Cover
- Up to 25dB of Wind Noise Reduction
- Developed by Shure with Rycote
- Fits VP83 & VP83F Model Mics
Special Order
You Pay:
$156.00
Boya BY-WS1000 Blimp Windshield and Suspension System for Shotgun Microphones
- Effectively Reduces Wind Noise
- Isolates Mic from Shock and Vibration
- Fits Mics from 20 to 22mm in Diameter
- For Shotgun Mics up to 32 cm Long
- Integrated Coiled XLR Cable
In stock
Ships tomorrow
You Pay:
$153.00
Rycote Shotgun Mic Foam and Windjammer Combo (12cm, Standard Hole)
Open Cell Foam: 10 dB Attenuation, Windjammer: 12 dB Attenuation
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$149.00
K-Tek Airo Fuzzy Windscreen 1
- Open-Cell Foam Covered by Faux Fur
- Faux Fur Made of Natural Looking Fibre
- Provides Optimal Wind Noise Reduction
- Seamless Front Panel
- Fits Most Common Shotgun Microphones
- Fits Mics up to 0.89" in Diameter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$149.00
Shure A89SW Foam Windscreen (Small)
- For VP89 Small Shotgun Microphone.
- Replacement Foam Windscreen.
Special Order
You Pay:
$149.00
You Pay:
$149.00
Rycote BBG Windjammer
- Synthetic Fur Cover
- Works with Mono BBG Windshields
- Protects against Extreme Wind Noise
- Up to 50 dB of Wind-Noise Attenuation
Usually ships in 1 - 2 weeks
You Pay:
$149.00
Orca OR-432 Medium Boom Pole Hard Shell Case
- Unique thermoforming technology
- Padded interior
- Detachable shoulder strap
- Secured with two hook and loop straps
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$149.00
Shure A55HM Half Surround Shock Isolator
- Designed for Tapered Microphones
- Standard threads
- Half-mount design
Special Order
You Pay:
$139.00
Rycote InVision INV-6 Microphone Suspension for Short/Small Condenser
- For Short-/Small-Diaphragm Condenser Mic
- Rycote's Latest Lyre Suspension
- Two 19 to 25mm Mounting Clips
- 3/8" Threaded Stand Mount
- Standard Support Bar Length
- For mics 4.7" Long, 0.7 to 0.9" Diameter
Usually ships in 1 - 2 weeks
You Pay:
$139.00
Orca OR-430 Small Boom Pole Hard Shell Case
- Unique thermoforming technology
- Padded interior
- Detachable shoulder strap
- Secured with two hook and loop straps
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$129.00
Rycote Shotgun Mic Foam and Windjammer Combo (18cm, ME66)
Open Cell Foam: 10 dB Attenuation, Windjammer: 12 dB Attenuation
Usually ships in 1 - 2 weeks
You Pay:
$129.00
K-Tek Airo Fuzzy Windscreen for Lavalier Microphone (White, 10-Pack)
- Reduces Wind and Breath Noise
- Faux Fur Material Ideal for Outdoor Use
- Protects against Rustling/Handling Noise
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$129.00
K-Tek Airo Fuzzy Windscreen for Lavalier Microphone (Grey, 10-Pack)
- Reduces Wind and Breath Noise
- Faux Fur Material Ideal for Outdoor Use
- Protects against Rustling/Handling Noise
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$129.00
K-Tek Airo Fuzzy Windscreen for Lavalier Microphone (Black, 10-Pack)
- Reduces Wind and Breath Noise
- Faux Fur Material Ideal for Outdoor Use
- Protects against Rustling/Handling Noise
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$129.00
Shure Foam Windscreen for Countryman Earset & Micro-Lavalier Mic (4-Pack, Tan)
Reduces speaker and environmental noise for the Countryman WCE6 and WCE6i earset, and the WCB6 micro-lavalier microphones.
Special Order
You Pay:
$129.00
Shure Foam Windscreen for Countryman Earset & Micro-Lavalier Mic (4-Pack, Black)
Reduces speaker and environmental noise for the Countryman WCE6 and WCE6i earset, and the WCB6 micro-lavalier microphones.
Special Order
You Pay:
$129.00
Rode Long Shotgun Blimp Extension Kit
- Allows use of long shotgun microphones
- Add-on component kit
- 265 mm blimp extension piece
Usually ships in 4 - 6 weeks
You Pay:
$129.00
Sony ADR77B - Set of 6 Black Metal Windscreens for ECM77B
- Metal windscreens
- Designed for the Sony ECM77 Mic
- Optimum rejection of wind noise
- Capsule protection
Usually ships in 4 - 6 weeks
You Pay:
$129.00
Shure A53M Shock Holder
- Designed for Tapered Microphones
- High-quality isolation mount
- Standard threads
- Secure hold
- Reduce mechanical noise
Special Order
You Pay:
$129.00
Ursa Fur Circles Lav Covers (100x, White)
- Reduce Clothing Noise
- Super Soft Fur
- Wind Protection
Usually ships in 4 - 6 weeks
You Pay:
$119.00
Ursa Fur Circles Lav Covers (100x, Black)
- Reduce Clothing Noise
- Super Soft Fur
- Wind Protection
Usually ships in 4 - 6 weeks
You Pay:
$119.00
Ursa Plush Circles 100x (White)
- Reduce Clothing Noise
- Super Plush Fur
- Wind Protection
Usually ships in 4 - 6 weeks
You Pay:
$119.00
Ursa Plush Circles Lav Covers (100x, Beige)
- Reduce Clothing Noise
- Super Plush Fur
- Wind Protection
Usually ships in 4 - 6 weeks
You Pay:
$119.00
Bubblebee Industries The Windkiller SE for DPA 4097 Microphone
- Fits DPA 4097 and 4099 Microphones
- Multi-Pile Fur Design
- Sound-Transparent Inner Fabric
- Made in Denmark
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Bubblebee Industries The Windkiller SE for DPA 4018G Microphone
- Fits DPA 4018G and 4018E Microphones
- Multi-Pile Fur Design
- Sound-Transparent Inner Fabric
- Made in Denmark
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Sennheiser MZW66 Velour Windscreen
Provides protection during outdoor applications for ME66 microphone
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
DPA Microphones Subminiature Grid, Metal (3-Pack, Beige)
- For DPA Subminiature Microphones
- Covers the Capsule Element
- All-Metal Construction
Special Order
You Pay:
$109.00