Accessories
DJI Wireless Microphone Transmitter
- Wireless sound transmission for convenient use
- Portable
- Use with DJI Wireless Microphone Windscreen to eliminate noise generated by wind
- Long battery life of up to six hours
- Remote shutter control (requires DJI Pocket 2 Do-It-All Handle and DJI Pocket 2)
In stock
Ships tomorrow
$169.00
You Pay:
$160.00
$169.00
Rycote Standard Hole Classic Softie Wind-Screen (7cm, 1.9 to 2.2cm Diameter Hole, Grey)
- For Sanken CS-M1 Microphone
- Works with Rode VideoMic NTG
- Fits 1.9 to 2.2cm Microphone Diameters
- Fur Cover Reduces Wind Noise
- Acoustically Transparent
- Protects Against Dust and Dirt
In stock
Ships tomorrow
$219.00
You Pay:
$159.00
$219.00
Boya BY-WS1000 Blimp Windshield and Suspension System for Shotgun Microphones
- Effectively Reduces Wind Noise
- Isolates Mic from Shock and Vibration
- Fits Mics from 20 to 22mm in Diameter
- For Shotgun Mics up to 32 cm Long
- Integrated Coiled XLR Cable
In stock
Ships tomorrow
You Pay:
$153.00
BOYA BY-PB25 Universal Carbon Fiber Boompole with internal XLR cable (2.5m)
- Lightweight Carbon Fibre Construction
- 3 x Telescoping Sections
- 1m to 2.5m Adjustable Length
- Internal Coiled Cable
- Bottom 3-Pin Male XLR Connection
In stock
Ships tomorrow
You Pay:
$169.00
Rycote - Portable Recorder Suspension
Lyre-based suspension for portable recorders
In stock
Ships tomorrow
You Pay:
$159.00
Rode RS-1 Dual-Dock Recharge Station
- For TX-M2 Microphones & LB-1 Batteries.
- Recharges Two Devices Simultaneously.
- Locking Power Connector.
- Sleek, Compact Desktop Design.
- Stable Platform Prevents Slippage.
In stock
Ships tomorrow
You Pay:
$179.00
Aston Microphones Swift GN Shield
- Plosive Reduction for Vocals
- Stainless-Steel Construction
- Hexagonal Design for Vocal Clarity
- Wrap-Around Design
- Flexible 15.4" (39.1cm) Gooseneck
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$149.00
K&M 21441 Adapter Sleeve with Ring Lock
Vibration-Free Connection
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$169.00
Audio Technica UE-UL Cardioid Replacement Element
- Replacement element
- For select microphones
- Cardioid polar pattern
- 90-degree pickup
- Minimises off-axis ambiance
In Stock
Ships tomorrow
You Pay:
$169.00
K-Tek Airo Fuzzy Windscreen 1
- Open-Cell Foam Covered by Faux Fur
- Faux Fur Made of Natural Looking Fibre
- Provides Optimal Wind Noise Reduction
- Seamless Front Panel
- Fits Most Common Shotgun Microphones
- Fits Mics up to 0.89" in Diameter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$149.00
Sennheiser MZW61 Windscreen
Protects against external noise - designed for the MKH60 microphone.
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$159.00
Orca OR-432 Medium Boom Pole Hard Shell Case
- Unique thermoforming technology
- Padded interior
- Detachable shoulder strap
- Secured with two hook and loop straps
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$149.00
Rycote BBG Windjammer
- Synthetic Fur Cover
- Works with Mono BBG Windshields
- Protects against Extreme Wind Noise
- Up to 50 dB of Wind-Noise Attenuation
Usually ships in 1 - 2 weeks
You Pay:
$149.00
Rycote InVision INV-HG mkIII Microphone Suspension - Lyre Shockmount
Accommodates most microphones measuring 19 to 34mm in diameter
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Rycote Overcovers Advanced, Fur Discs for Lavalier Microphones (100-Pack, Black)
Suitable for Lavalier Microphones, High-Quality Fur (No Stickies)
Usually ships in 1 - 2 weeks
You Pay:
$169.00
Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (XS, Black)
- For 55mm Long Microphones
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Medium, Black)
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Short Fur Slip-On Wind Protector for 18 to 24mm Mics (Large, Black)
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 23 to 26mm Mics (XL, Black)
- For 180mm Long Microphones
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (XL, Black)
- For 180mm Long Microphones
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Shure Cartridge for 55SH
Replacement Cartridge for Shure 55SH Cardioid Dynamic Microphone
Special Order
You Pay:
$149.00
Rycote InVision Video Hot Shoe Adapter
Eliminates camera motor noise for cameras with a hot shoe
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Rode Micro Boompole Pro Ultra-Lightweight Modular Boom Pole (7')
- For the VideoMicro Microphone
- Modular with 3-Sections
- Lightweight
Usually ships in 4 - 6 weeks
You Pay:
$179.00
You Pay:
$149.00
Rycote InVision USM-VB Universal Microphone Shock-Mount
For Large Diaphragm Studio Microphones, Load Capacity: 1.98lb (900g)
Usually ships in 1 - 2 weeks
You Pay:
$179.00
Saramonic SmartRig-Di (with Lightning Connector for iOS) XLR Smartphone Microphone Audio Adapter
- Standard Certified Lightning Connector
- Combo 1/4''(6.35mm) & XLR Input
- 48V Phantom Power
- 3.5mm Monitor Jack
- Gain Control
Usually ships in 2 - 4 weeks
You Pay:
$169.00
You Pay:
$149.00
Shure WL184/MX S.Cardioid Cart - Black
Supercardioid Cartridge for WL183, WL184, WL185 & all Microflex Mics
Contact us for an ETA
Price On Request
Contact us for more information
Bubblebee Industries Windbubbles United Furry Windbubbles for Lav Mics 5 to 9mm (4-Pack)
- Black, Brown, Grey, & White Colours
- Reduces Vocal Plosives
- Reduces Wind Noise
- Easy to Mount on Microphone
- Built with Imitation Fur
Usually ships in 1 - 2 weeks
You Pay:
$169.00
sE Electronics Isolation Pack
- Shock Mount with Integrated Pop Shield
- For Magneto, X1 & sE 2200a II Series
- Guards Against Vocal Pops
- Absorbs Shock and Vibration
- Durable Construction
Contact us for an ETA
You Pay:
$159.00
Warm Audio WA-84 Omnidirectional Microphone Capsule (Black)
- For Use with WA-84 Microphones
- Omni Capsule Plugs into Mic
- Flat Response to Approximately 4.5 kHz
- Gentle High-Frequency Boost
Usually ships in 3 - 5 working days
You Pay:
$179.00
Warm Audio WA-84 Omnidirectional Microphone Capsule (Nickel)
- For Use with WA-84 Microphones
- Omni Capsule Plugs into Mic
- Flat Response to Approximately 4.5 kHz
- Gentle High-Frequency Boost
Usually ships in 3 - 5 working days
You Pay:
$179.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Red, XL)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Extra-Large
- Fits Spacer Bubble Extra-Large/Big Mount
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Red, Large)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Large
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Red, Medium)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Medium
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Red, Small)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Small
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Red, XS)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Extra-Small
- Fits Spacer Bubble Extra-Small/Big Mount
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Blue, XL)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Extra-Large
- Fits Spacer Bubble Extra-Large/Big Mount
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Blue, Large)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Large
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Blue, Medium)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Medium
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Blue, Small)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Small
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Blue, XS)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Extra-Small
- Fits Spacer Bubble Extra-Small/Big Mount
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Green, XL)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Extra-Large
- Fits Spacer Bubble Extra-Large/Big Mount
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Green, Large)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Large
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Green, Medium)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Medium
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Green, Small)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Small
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Green, XS)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Extra-Small
- Fits Spacer Bubble Extra-Small/Big Mount
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Black, XL)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Extra-Large
- Fits Spacer Bubble Extra-Large/Big Mount
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Black, Large)
- Minimises Light-to-Medium Wind Noise
- Fits The Spacer Bubble Large
- Short-Haired/High-Density Slip-On Fur
- Acoustically Transparent Design
- Quick-Drying Fur
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Shure Fur Windjammer for VP83 and VP83F LensHopper Microphones
- Synthetic Fur Cover
- Up to 25dB of Wind Noise Reduction
- Developed by Shure with Rycote
- Fits VP83 & VP83F Model Mics
Special Order
You Pay:
$156.00