Lyre webs: 43mm Wide by 40mm High with two 20mm clips


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives
North Island
$3.72
South Island
$3.72

The Rycote - INV-3 addresses the demand for a professional, Rycote-quality shockmount in the studio, conference settings and speech capturing applications. The entire mount is comprised of two low-profile InVision lyres with a 20mm clip at the front and rear. The lyres rest on a bar with a 3/8" threaded stand adapter at the base.

The stand adapter itself features an integrated cable clip for securing excess cable and minimizing noise. The unique lyre suspension is engineered with Hytrel for a virtually indestructible design that maximizes shock and noise suppression.

The InVision suspension system is available in various clip sizes to accommodate different microphones. The dual 20mm mounting clips included with this system are intended for mounting microphones such as the DPA4021, Neumann KM100/180 Series, Sennheiser MKH8000 (with XLR module).

Some of the compatible microphones include: the AKG C430, Behringer C2, DPA 4021 and Sennheiser MKH8000 series with MZX8000.

Product Highlights

  • InVision Lyre Suspension - The small InVision lyre suspension webs measure 42mm high and 40mm wide. The small, low-profile design is ideal in broadcasts, recording applications, etc.
  • Two 20mm Clips - The 20mm mounting clips included with this system are intended for mounting microphones such as the DPA4021, Neumann KM100/180 Series, Sennheiser MKH8000 (with XLR module).
  • Hytrel Construction - The unique lyre suspension is engineered with Hytrel for a virtually indestructible design that maximizes shock and noise suppression.
  • Integrated 3/8" Threaded Stand Adapter - A 3/8" threaded stand adapter is featured at the base for microphone stand mounting.

Benefits

  • Virtually indestructible
  • Offers much improved isolation from noise compared to elasticated suspensions
  • No elasticated parts — never sags or needs rethreading
  • Designed specifically for static use on desk & floor stands, when a discrete profile is essential.

Specifications

  • Lyre suspension width: 42mm
  • Lyre suspension height: 40mm
  • Front clip: 20mm
  • Back clip: 20mm
  • Bar length: 25mm
  • Lyre web: 43mm

Note! Boom stand and microphone are not included

Product:
Rycote - INV-3
Manufacturer:
Rycote
Model:
041103
SKU:
041103
RM Product #:
9690