DPA Microphones d:vote 4099V Clip Microphone for Violin with XLR Adapter
Product #20817
SKU VO4099V
Usually ships in 2 - 3 weeks


DPA Microphones d:vote 4099V Clip Microphone for Violin with XLR Adapter

Product #20817 | SKU VO4099V
Usually ships in 2 - 3 weeks

Designed to clip onto your violin, viola, banjo etc.
Our Price $899.00


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives

The d:vote 4099V Clip Microphone for Violin with XLR Adapter from DPA Microphones is designed to clip onto your violin, viola, banjo, or other string instrument with a body depth between 1.4 and 2.1". The clip has a holder that attaches gently to avoid damaging older and gentle instruments. It can be adjusted with one hand. The microphone itself is a supercardioid condenser with a 5.5" adjustable gooseneck for ease in positioning. It also features a detachable cable, allowing you to attach your mic to your string instrument before connecting it. The 4099V terminates in a Microdot connector, allowing compatibility with DPA's connection adapters for use with a variety of third party wireless systems. An XLR adapter with a belt clip is included for use in a wired system with 48-volt phantom power.

Specifications

Transducer Type
Pre-Polarized Condenser
Polar Pattern
Supercardioid
Principle of Operation
Pressure Gradient
Frequency Range
20 Hz to 20 kHz
80 Hz to 15 kHz with 2 dB Soft Boost @ 10 to 12 kHz, Second Order Low-Cut Filter @ 80 Hz (>+/- 2 dB, 20 cm Distance)
Sensitivity
6 mV/Pa; -44.5 dB Reference: 1 V/Pa (Nominal, +/- 3 dB)
Equivalent Noise Level
Typ. 23 dB(A) Reference: 20 µPa (Maximum 26 dB(A)) (A-Weighted)
Signal to Noise Ratio
71 dB (Reference: 1 kHz @ 1 Pa, 94 dB SPL)
Total Harmonic Distortion (THD)
< 1 % up to 123 dB SPL peak
< 1 % up to 120 dB SPL RMS sine
Dynamic Range
100 dB
Maximum SPL
142 dB (Peak Before Clipping)
Output Impedance
MicroDot: 30 to 40 Ω,
XLR: 100 Ω
Cable Drive Capability
XLR: 984' (300 m)
Output Balance Principle
Signal balanced with XLR adapter
CMRR
XLR Adapter: > 60 dB at 50 Hz to 15 kHz
Power Supply
Minimum 5 V to Maximum 50 V through DPA adapter for wireless systems
48 V phantom power ±4 V with XLR adapter
Current Consumption
XLR Adapter: 1.5 mA; 3.5 mA
Connector
Microdot
XLR Adapter Included
Compatibility
Fits Instruments with a Body Depth Between 1.4 and 2.1" (35 and 55 mm)
Polarity
Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD4099-BC XLR adapter)
Operating Temperature
-40 to 113°F (-40 to 45°C)
Relative Humidity
Up to 90%
Cable Length
6' (1.8 m)
Gooseneck
Length: 5.5" (140 mm)
Microphone Length
1.8" (45 mm)
Weight
1.16 oz (33 g)

Reviews

Own or use this product?
Give it a rating

Reviews

Own or use this product?
Give it a rating
Product:
DPA Microphones d:vote 4099V Clip Microphone for Violin with XLR Adapter
Manufacturer:
DPA Microphones
Model:
VO4099V
SKU:
VO4099V
RM Product #:
20817