The Sony ECM 88BC is a miniature condenser, lavalier microphone with a 4-pin Hirose connection. The 4-pin connector enables use with Sony WRT-822B and WRT-8B bodypack transmitters. The capsule is 3.5 x 3.5 x 16.8 mm, allowing natural-looking concealment on stage or camera. The electret condenser element uses a dual-diaphragm mechanism, resulting in high sensitivity.
The microphone provides a flat, wide frequency response (20Hz to 20kHz) resulting in a natural sound reproduction, capturing in great detail. The water resistant design assures durability from the elements as well as moisture caused by sweat in stage applications.
The microphones ultra-miniature design provides the level of concealment needed for the stage and on camera.
4-pin Hirose Connection
The 4-pin connector enables use with Sony WRT-822B and WRT-8B bodypack transmitters.
High Sonic Character
The condenser element provides a wide, flat frequency response and high dynamic range resulting in clean, quiet recordings.
The microphone is designed to resist moisture caused by the elements or sweat.
|Frequency Response||20Hz - 20kHz|
|Dynamic Range (Typical)||Greater than 99 dB|
|Signal-to-Noise Ratio||62 dB @ 1kHz (A-weighted, 1khz, 1Pa.)|
|Maximum Input Sound Level||125 dB SPL|
|Power Requirements||DC 1.1 to 10 Volts|
|Output Impedance||100 ohms +/- 20% (when used in combination with the DC-78)|
|Output Connectors||SMC9-4P (4-pin Hirose)|
|Low Frequency Roll-Off||None|
|Applications||Radio, Television and Broadcast.|
|Dimensions||3.5 x 3.5 x 16.8 mm|
|Weight||32 g (with cable)|