Beyerdynamic MCE85 PV Condenser Shotgun MicrophoneProduct #50806 | SKU MCE85PV
- Maximum Attenuation of Ambient Noise
- Exceptionally precise recordings even in loud environments
- Low Cut Filter
- Smart Design
Developed for professional indoor and outdoor audio recordings, the MCE 85 PV combines superior quality and excellent polar patterns in a rugged yet lightweight aluminium housing.
The MCE 85 PV can be mounted to film cameras, DSLR cameras, digital camcorders or in combination with a microphone boom or as a handheld for high-quality recordings.
Thanks to the supercardioid / lobe polar pattern the MCE 85 PV can be used to record a sound source very precisely without disturbing ambient noise. A high-quality electret condenser microphone capsule inside the shotgun microphone ensures exceptionally precise sound reproduction. The included low cut filter can be switched on and off. It eliminates low frequencies and compensates for mechanical vibrations and proximity effect..
The MCE 85 PV can be powered from any balanced phantom source.
|Transducer type||Condenser (back electret)|
|Operating principle||Pressure gradient|
|Frequency response||40 - 19,000 Hz (switchable bass roll-off filter at 160 Hz)|
|Open circuit voltage at 1 kHz (0 dB = 1 V/Pa)||-30.0 dBV = 31.6 mV/Pa ±3 dB|
|Nominal impedance||200 Ω|
|Load impedance||≥1 kΩ|
|Rejection factor||>68 dB|
|Max. SPL at 1 kHz||118 dB|
|Volume range||99 dB|
|Signal-to-noise ratio rel. to 1 Pa||75 dB (A-weighted, RMS)|
|Equivalent SPL||19 dB (A-weighted, RMS)|
|Noise voltage||5.6 µVrms (A-weighted, RMS)|
|Polarity||Positive pressure at the diaphragm produces a positive voltage on pin 2|
|Connection||3-pin male XLR
2 = +, 3 = -, 1 = ground
|Voltage supply||11 - 52 V phantom power|
|Power consumption||2.4 mA, typ.|
|Temperature range (at <90% humidity)||-20 °C to +65 °C|