NITECORE P12GT LED Flashlight has been discontinued, here are some related products you might like:
Overview
Description
Note: Product does not include batteries
Nitecore 's P12GT LED Flashlight offers users a wide range of outputs and modes that make this light ideal as an EDC duty light, camp light, or general-purpose tool for around the house. The light's performance starts with the powerful and energy efficient CREE XP-L HI V3 LED that produces four primary outputs from an ultra-low of just 1 lumen to a darkness-piercing 1000 lumens for searching large areas. In addition to the five main outputs, there is also a disorientating strobe, an SOS distress signal, and location beacon modes to increase the light's versatility. A dual pushbutton interface is configured with one switch on the tailcap that controls the on/off with momentary and constant-on options, and another on the body for brightness and mode selection. With last-mode-memory on the switch for the primary outputs and strobe, users can set their preference then instantly go to that output by turning the light on.
The P12GT housing is made from a lightweight and durable aluminium alloy with a corrosion and scratch-resistant Type III hard anodised finish. O-rings seal the housing to give it an IPX8 rating, making it waterproof and submersible to 6.6' for up to 30 minutes. It comes with a removable tactical ring that instals in one of two locations to help users securely hold their light and pistol in various tactical hold techniques. This light can run on one user-supplied 18650 rechargeable battery, or two CR123 disposable or rechargeable batteries - but while using CR123 batteries maintains outputs, runtimes will be reduced. Nitecore's "Advanced Temperature Regulation" (ATR) circuitry monitors internal temperature and adjusts output to prevent damage, while circuitry digitally regulates the output to ensure consistent beam intensity throughout the life of the battery. This flashlight includes a quality holster, clip, tactical ring, lanyard, spare tail cap cover and a spare O-ring.
Key Features:
Performance
- Min: 1 lumen
- Low: 55 lumen
- Moed: 280 lumen
- High: 1000 lumen
- One CREE XP-L HI V3 LED
- SOS distress signal automatically cycles through the Morse code sequence
- Location beacon: Pulse output to mark the light's location
- Strobe mode to disorientate or signal
- Reflector produces a smooth beam without holes or hotspots
Switching
- Location: Tailcap and body
- Type: Dual pushbutton
- Tailcap: Controls on/off
- Body: Output and mode selection
- Momentary and constant-on activation
- Power indicator integrated into switch
- Last mode memory automatically goes to last selected output when turned on
- If the light is turned off in strobe mode, strobe will resume when the light is turned on
Construction
- Lightweight and durable aluminium alloy housing
- Corrosion and scratch-resistant Type III hard anodised finish
- Tempered and anti-reflection coated shatter-resistant emitter window
- Heat dissipating fins on head help to prevent overheating
- IPX8-rated, waterproof and submersible to 6.6'
- Impact-resistant to 5'
- Removable tactical ring facilitates multiple light/pistol grip techniques
- Removable stainless steel pocket clip
Electrionics
- Advanced Temperature Regulation (ATR) circuitry monitors internal temperature and adjusts output to prevent damage
- Runs on one user-supplied 18650 rechargeable battery, or two CR123 disposable or rechargeable batteries
- Using CR123 batteries maintains outputs but with reduced runtimes
- Digitally regulated output provides consistent beam intensity throughout battery charge
- Power indicator integrated into body switch
Specifications
Illumination Source | CREE XP-L HI V3 LED |
Output Range | Min: 1 lumen Low: 55 lumen Moed: 280 lumen High: 1000 lumen |
Battery | 1 x 18650 rechargeable Li-ion 2 x CR123, lithium or Li-ion |
Runtime | 18650 battery: Min: 520.0 h Low: 28.0 h Moed: 5.25 h High: 1.0 h CR123 batteries: Min: 300.0 h Low: 20.0 h Moed: 3.5 h High: 0.75 h |
Construction | Aluminium alloy |
Waterproofing | IPX8-rated, submersible to 6.6' / 2.0 m |
Impact Resistance | 4.9' / 1.5 m |
Dimensions | Head: 1.0" / 2.5 cm Handle: 1.0" / 2.5 cm Length: 5.5" / 14.0 cm |
Weight | 3.2 oz / 91.0 g, without battery |
In The Box
- NITECORE P12GT LED Flashlight
- Holster
- Clip
- Tactical ring
- Lanyard
- Spare tail cap cover
- Spare O-ring
Reviews
(based on 2 ratings)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: NITECORE P12GT LED Flashlight
- Manufacturer: Nitecore
- Model: P12GT
- SKU: P12GT
- RM Product #: 38054