Godox AD200 TTL Pocket Dual Flash Kit with X1T-C Trigger for Canon CamerasProduct #51168 | SKU GOAD200ADX1C
- Built-In 2.4 GHz X Wireless Radio System
- Compatible with Canon E-TTL / E-TTL II
- Dual Power Flash Bracket
- Two AD200 Bare Bulb Flash Heads
- Two AD200 Speedlite Flash Heads
Ultimate power is the advantage of the Godox AD200 TTL Pocket Dual Flash Kit as the 200Ws flashes can be configured to power two bare-bulb heads in a single stand-mounted bracket with Bowens accessory mount. This provides users with excellent power output and customisation, while the flashes can also be easily removed and used with speedlight heads for a completely different look. Also, this kit includes the X1T-C trigger, which provides wireless Canon E-TTL / E-TTL II support and the ability to remotely trigger and control the flashes from up to 100m away.
The AD200 TTL Pocket Flash Kit from Godox is built around a unique flash light source that has a standard speedlite head and a bare bulb head that give you the option of 2 distinctly different qualities of light. The kit comes with the 2 heads, lithium battery, charger and carry case.
The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish or umbrella. The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control. The AD200 has impressive core features such as 200 Ws of power adjustable in 8 steps from 1/128 to 1/1, recycling from 0.01 to 2.1 seconds and flash durations as short as 1/11,300 sec. The flash runs on a removal rechargeable lithium battery that will give you up to 500 full power flashes and thousands of lower power flashes.
The AD200 has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user's choice of power, modelling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head's built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, Panasonic and Fuji cameras. They will also detect a separately purchased LED head. The 32-channel wireless system controls flash mode, first and second curtain sync, High-speed sync up to 1/8000 sec, power level, modelling lamp and ready beeper at distances up to 100m. Firmware updates are obtainable on the Godox website.
The Dual Power Flash Bracket for AD200 from Godox allows you to mount two AD200 Pocket Flashes together to double the flash power. The bracket has a Bowens S-type front accessory mount and a 5/8" receiver for light stands.
Enjoy TTL-enabled and reliable wireless flash by picking up the X1T-C TTL Wireless Flash Trigger Transmitter from Godox . This 2.4 GHz system is compatible with Canon cameras and flashes that support E-TTL / E-TTL II for automatic exposure and metering, making it an excellent choice for shooters who need to work quickly. It also has an outstanding range of 100m and can be set to one of 32 channels for limiting interference with other nearby systems. Another huge benefit is the ability to control up to five groups at a time, or set the unit to ratio flash mode for three groups with varying power relative to one another.
Users will have access to many settings through the backlit LCD and can make adjustments to settings such as sync delay and triggering modes. Also, through E-TTL / E-TTL II compatibility the system will support high-speed sync, flash exposure compensation, and flash exposure lock, among other settings. Beyond this, users will be able to easily mount their flash to the transmitter's top hot shoe, or you can connect a studio strobe via the PC sync terminal on the receiver or PC sync terminal on the transmitter. Additionally, it runs on two AA batteries and has a micro-USB port for firmware updates.
Built-In 2.4 GHz Wireless X System
Built-in wireless receiver: control triggering power level, alert beep with optional wireless transmitter. Compatible with Nikon, Canon, Sony, Olympus, Panasonic and Fuji TTL.
Bare Bulb and Speedlight Flash Heads
Bare bulb and speedlite flash heads are included to vary your quality of light. Colour temperature is a steady 5600K over the entire power range.
Large Capacity Lithium Battery Pack
The 14.4 V / 2900 mAH battery pack gets 500 full power flashes with 0.01 to 2.1 sec. recycling.
Easily readable digital panel displays your adjustments
Barn Doors, colour filters and diffusers are available to personalise your work.
Numerous Control Functions
- 8-step power range: 1/1 to 1/128
- Supports flash exposure compensation
- 1/8000 sec high-speed Sync
- First and second curtain sync
- Modelling lamp
- Manual flash
- Multi flash
- Custom functions
|2 x Godox AD200 TTL Pocket Flash Kit|
|Compatibility||TTL with Canon, Nikon, Sony cameras with optional X1-C, X1-N, and X1-S transmitters|
TTL with Olympus/Panasonic, Fuji cameras with optional X1T-O and X1T-F transmitters
|Control||Manually on unit|
Via X1 Transmitter Which Will Wirelessly Control:
Flash Mode: TTL, Manual, Multi (Stroboscopic), power level
Modelling lamp on/off, Beeper on/off
First and second curtain sync, High Speed Sync
|Guide Number||At Full Power:|
Speedlite Flash Head: 52 m ISO 100 @ 35 mm
Bare Bulb Flash Head: 60 m ISO 100 with AD-S2 reflector @ 28 mm
|Colour Temperature||5600K (+/-200K)|
|Recycle Time||0.01 to 2.1 sec|
|Flash Duration||Speedlite Flash Head at t0.1: 1/220 to 1/13,000 sec|
Bare Bulb Flash Head at t0.1: 1/220 to 1/11,300 sec
|Flash Variability||8 Steps: 1/128 to 1/1|
|Flash Delay||Yes, 0.01 to 30 sec|
|Flash Modes||TTL, Manual, Multi (Stroboscopic)|
Stroboscopic: up to 90 times (99 Hz)
|Modelling Light||Uses Speedlite Head: Auto turn off after 30 minutes|
|Sync Mode||High-speed sync up to 1/8000 sec|
First curtain sync and second curtain sync
|Flash Exposure Compensation||Yes, plus or minus 3 stops in 1/3 stop increments|
|Flash Ready Indicator||LED, beep|
Flash hibernates automatically after 30 minutes of non-use
|Built-in Slave Cell||S1 and S2 optical slave modes|
2.4 GHz radio system
|Wireless & Radio Specifications||Function: Slave or Off|
Groups: 5 (A, B, C, D, E)
Range: 100 m
|Mounting||1/4"-20 female threads|
AD-E Holder (stand mount)
|Replaceable Flashtube||Yes, in bare bulb head|
|Connectors||3.5 mm sync input|
Wireless control port
|Battery||Lithium, 14.4 V / 2900 mAH|
Power remaining indicator
|Number of Flashes @ Full Power||500|
|Dimensions||168 x 75 x 50 mm without flash head|
|Weight||560 g without flash head and battery|
|Godox Dual Power Flash Bracket for AD200|
|Mount||5/8" (16 mm)|
|Godox X1T-C TTL Wireless Flash Trigger Transmitter for Canon|
|Compatibility||Canon E-TTL / E-TTL II|
|Max Sync Speed||1/8000 second|
|Sync Terminal||Hot shoe, PC sync terminal|
|Power Source||2 x AA batteries|
|Dimensions||72 x 75 x 52 mm|
In The Box
- 2 x AD200 TTL Pocket Flash Kit
- H200 Speedlite Flash Head
- Bare Bulb Flash Head
- Flash Tube
- Lithium-Ion Battery Pack for AD200 Pocket Flash (14.4V, 2900mAh)
- Charger and Cable
- AD-E Holder (Stand Mount)
- Carrying Case
- Limited 1-Year Warranty
- Dual Power Flash Bracket for AD200
- X1T-C TTL Wireless Flash Trigger Transmitter for Canon