Mounting Hardware

Manfrotto 013 Adapter Spigot

A double ended spigot with 1/4 inch and 3/8 inch male threads.
In stock Ships Tuesday
$19.95
You Pay: $18.00

Manfrotto 014-38 Rapid Adapter

  • 3/8'' screw
  • 5/8'' (16mm) socket
  • Aluminium
In stock Ships Tuesday
$28.95
You Pay: $26.00

Kupo KCP-600 Super Viser Clamp with Hex Receiver (10.2cm, End Jaw)

Steel and Aluminum Construction, 30kg Load Capacity
In stock Ships Tuesday
$86.95
You Pay: $54.00

Manfrotto 015 Adapter

Reduces a 3/8 inch threaded screw to a standard 1/4 inch tip.
In stock Ships Tuesday
$10.95
You Pay: $9.00

Manfrotto MF125 Adapter Spigot 3/8"+ 3/8"

  • 3/8" + 3/8" Brass Spigot
In stock Ships Tuesday
$10.95
You Pay: $8.00

Kupo KS-060 5/8"(16mm) Receiver with 1/4"-20 Thread

Allows Stand Mounting, Spring-Loaded Locking Knob
In stock Ships Tuesday
$18.95
You Pay: $11.00

9.SOLUTIONS Savior Clamp Mini

  • Load Capacity: 30 kg
  • Weighs 135 g
  • 30 mm Jaw Opening
In stock Ships Tuesday
$70.95
You Pay: $66.00

Manfrotto 014-14 Rapid Adapter

Allows mounting of equipment with a 1/4 inch threaded receptor.
In stock Ships Tuesday
$28.95
You Pay: $26.00

9.SOLUTIONS Baby Pins

Increase mounting utility to anything with a 3/8" thread
In stock Ships Tuesday
$45.95
You Pay: $42.00

9.SOLUTIONS Python Double Clamp

  • Load Capacity: 20 kg
  • Jaws Open from 0 to 50 mm
  • Two clamps
  • Dual contoured jaws
In stock Ships Tuesday
$109.00
You Pay: $98.00

Kupo KS-054 3/8"-16 Male to 1/4"-20 Male Thread Adapter

Male 1/4"-20 to male 3/8"-16 adapter
In stock Ships Tuesday
$7.95
You Pay: $4.00

Kupo KCP-930P 3-Way Clamp for 1.0-1.4"(25-35 mm) Tube

Mounts Around Tubing Sized 1.0-1.4", Three Recessed Mounting Points
In stock Ships Tuesday
$55.95
You Pay: $34.00

Kupo KS-085 Quick Release Adapter Set (1/4"-20)

1/4"-20 Top Mount, Spring-Loaded Ball Bearing Mechanism
In stock Ships Tuesday
$38.95
You Pay: $23.00

Kupo KCP-101 Max Arm

Adjustable Aluminum Arm, Two Studs Attached to Ball Joints
In stock Ships Tuesday
$169.00
You Pay: $101.00

9.SOLUTIONS Savior Spring Clamp Mini

  • Jaws Have Multiple Contact Points
  • 2 x 1/4"-20 and 2 x 3/8"-16 Sockets
  • Clamping Range: 0 to 45 mm
In stock Ships Tuesday
$50.95
You Pay: $47.00

Kupo KS-091 Baby 5/8"(16mm) Stud, 4.25"(10.8cm) Long for 3 & 4-Way Clamp

Notch for Mounting Location, Locking Collar
In stock Ships Tuesday
$19.95
You Pay: $12.00

9.SOLUTIONS Python Clamp Mini

  • Load Capacity: 5 kg
  • Jaws Open from 8 - 35 mm
  • Position anywhere
In stock Ships Tuesday
$51.95
You Pay: $48.00

9.SOLUTIONS Python Clamp

Load Capacity: 20kg, Jaws Open from 0 to 50mm
In stock Ships Tuesday
$53.95
You Pay: $45.00

Kupo KCP-730B Super Claw

6kg Load Capacity, Aluminum Construction, 1/4"-20 and 3/8"-16 Taps
In stock Ships Tuesday
$46.95
You Pay: $28.00

Kupo KCP-350B Mini Alli Clamp (Black Powder Coated Finish)

All-Purpose Spring Clamp, Accepts Any 5/8" Stud, Steel & Aluminum
In stock Ships Tuesday
$24.95
You Pay: $15.00

9.SOLUTIONS Python Clamp with Grip Joint

  • Load Capacity: 20 kg
  • Clamping Range: 0 to 50 mm
  • Tightening Knob
  • Grip Joint with 3/8" & 5/8" Receptacles
  • 3/8"-16 (M10) Connection
In stock Ships Tuesday
$80.95
You Pay: $76.00

9.SOLUTIONS Python Clamp with 3/8" Male Thread

Load Capacity: 20kg, Jaws Open from 0 to 50mm
In stock Ships Tuesday
$69.95
You Pay: $59.00

9.SOLUTIONS Python Clamp with Snap-In Socket

  • Load Capacity: 20 kg
  • Clamping Range: 0 to 50 mm
  • Tightening Knob
  • 5/8" Receiver
  • 3/8"-16 (M10) Connection
In stock Ships Tuesday
$99.95
You Pay: $90.00

Manfrotto 026 Swivel Adapter

An adapter with the ability to rotate - supports up to 2.5kg
In stock Ships Tuesday

9.SOLUTIONS Mini Rigging Rod Set Nuts

  • 2x Long Nuts
  • 6x Finger Nuts
  • 3/8" Thread
In stock Ships Tuesday
$31.95
You Pay: $26.00

Manfrotto 035 Super Clamp without Stud

  • Lightweight cast alloy
  • Holds just about anything
  • Mount on any tube 13 - 55 mm
  • Jaw Opening of 1.3 - 5.3  cm
  • Stud not included
In stock Ships Tuesday

Kupo KS-097 Baby Ball Head Adapter

Mount Tripod Head to Light Stand, Three Set Screws to Lock Down Head
In stock Ships Tuesday
$49.95
You Pay: $30.00

Kupo KS-092 Baby 5/8"(16mm) Stud, 2.5"(6.35cm) Long for 3 & 4-Way Clamp

Notch Slides into Mounting Location, Locking Collar
In stock Ships Tuesday
$16.95
You Pay: $10.00

Kupo KCP-220 20" (50.8cm) Grip Arm With Big Handle (Silver Machined Finish)

Rough Non-Slip Surface, Aluminum & Steel
In stock Ships Tuesday
$63.95
You Pay: $39.00

9.SOLUTIONS Python Clamp with 5/8" Pin

  • Load Capacity: 20 kg
  • Clamping Range: 0 to 50 mm
  • Tightening Knob
  • 5/8" Pin
  • 3/8"-16 (M10) Connection
In stock Ships Tuesday
$69.95
You Pay: $65.00

CHAUVET CLP-03 Light-Duty C-Clamp for 1-2" Truss (20Kg Capacity)

Adjustable Knob for Tight Fit, 20Kg Capacity
In stock Ships Tuesday
$10.95
You Pay: $8.00

Kupo KCP-450 4-1/2" Grip Head With 1-1/8" Stud and Receiver

Supports 5/8"(16 mm) and 3/8" Accessories, Holds Large Overhead Frames
In stock Ships Tuesday
$129.00
You Pay: $76.00

Impact Double Ended Spigot with 1/4"-20 and 3/8" Male Threads

Features both 1/4"-20 and 3/8" male thread sizes
In stock Ships Tuesday

Manfrotto 035C Super Clamp without Stud (Ratchet version)

  • Securely mounted on any tube from 13 to 45 mm
  • Equipped with ratchet handle
  • Universal 1/4'' thread attachment
  • Attachment is 5/8'' hexagonal socket
In stock Ships Tuesday

Kupo KS-084 Quick Release Adapter (1/4"-20)

1/4"-20 Male to Male Adapter, Spring-Loaded Ball Bearing Mechanism
In stock Ships Tuesday
$30.95
You Pay: $19.00

Kupo KS-048 Junior 3"(7.62cm) Wall Plate, Junior 1-1/8" Receiver

Eight Anchor Points, Metal Locking Knob, Chrome-Plated Steel Finish
In stock Ships Tuesday
$43.95
You Pay: $27.00

K&M 216 Thread Adapter 5/8" 27 Gauge Female Thread to 3/8" Male Thread

For Microphone Mounts and Stands
In stock Ships Tuesday

SmallRig 856 Thread adapter w/ 1/4" to 3/8" thread 10pcs Pack

Available to order today
In stock Ships Tuesday

Manfrotto 175 Spring Clamp

A multi-purpose clamp that can grip 40mm to 5mm
In stock Ships Tuesday

Manfrotto 088 Thread Adapter

Converts a female 1/4 inch screw to a male 3/8 inch thread.
In stock Ships Tuesday

Impact TVMP Yoke to Baby or Junior Adapter

Allows light fixtures that have no stud to be mounted on a light stand
In stock Ships Tuesday

SmallRig 1610 New Thread Adapter w/ 1/4" to 3/8" thread 5pcs pack

Available to order today
In stock Ships Tuesday

Impact Super Clamp with Ratchet Handle

Versatile grip tool made of lightweight cast alloy
In stock Ships Tuesday

Manfrotto 088LBP - Small Adapter

  • Replaces #3367
  • Reducing bushing
In stock Ships Tuesday

SmallRig 1069 Thread Adapter with female 1/4" to male 3/8" thread

Standard female 1/4"-20 to male 3/8"-16 thread
In stock Ships Tuesday

SmallRig 828 Double Head Stud with 1/4" to 1/4" thread

Available to order today
In stock Ships Tuesday

Manfrotto 036-38 Lighting Stud

Features a 3/8 inch screw - ideal when mounting cameras directly
In stock Ships Tuesday

Phottix Multi Clamp

Attaches to any circular bar or pole.
In stock Ships Tuesday

Manfrotto 147 Adapter Spigot 3/8" + 1/4"

A brass spigot with a 3/8 inch and a 1/4 inch screw.
In stock Ships Tuesday

SmallRig 855 Double Head Stud with 1/4" to 3/8" thread

Available to order today
In stock Ships Tuesday

1 2 3 4 5 Next >