Studs, Receptors & Pins

Manfrotto 026 Swivel Adapter

An adapter with the ability to rotate - supports up to 2.5kg
In stock Ships today

Manfrotto 037 Reversible Short Stud, with 3/8" & 1/4"-20 Threads (Brass)

  • For Super Clamp System
  • Replaces #2907
In stock Ships today

Impact Double Ended Spigot with 1/4"-20 and 3/8" Male Threads

Features both 1/4"-20 and 3/8" male thread sizes
In stock Ships today

Manfrotto 013 Adapter Spigot

A double ended spigot with 1/4 inch and 3/8 inch male threads.
In stock Ships today

Manfrotto 036MR Lighting Stud

Attaches by a 5/8 in stud and a hole to insert a safety cable.
In stock Ships today

Manfrotto 036-38 Lighting Stud

Features a 3/8 inch screw - ideal when mounting cameras directly
In stock Ships today

9.SOLUTIONS Baby Pins

Increase mounting utility to anything with a 3/8" thread
In stock Ships today

Kupo KS-060 5/8"(16mm) Receiver with 1/4"-20 Thread

Allows Stand Mounting, Spring-Loaded Locking Knob
In stock Ships today

Kupo KCP-200B 2-1/2" Grip Head With Big Handle (Black Powder-Coated Finish)

Aluminum & Steel, Four V-Shaped Jaws, Handle With Roller Bearings
In stock Ships today

Kupo KCP-930P 3-Way Clamp for 1.0-1.4"(25-35 mm) Tube

Mounts Around Tubing Sized 1.0-1.4", Three Recessed Mounting Points
In stock Ships today

Kupo KS-091 Baby 5/8"(16mm) Stud, 4.25"(10.8cm) Long for 3 & 4-Way Clamp

Notch for Mounting Location, Locking Collar
In stock Ships today

Impact SRP-113 Long Double Stud 5/8"

Ideal for use with super clamp or other grip and mounting accessories
In stock with supplier Usually ships in 6 - 9 days

Avenger E200 Stand Adapter

Zinc-plated Steel Construction, Junior to Baby: 1 1/8" to 5/8"
Special order from Supplier Usually ships in 6-8 Weeks

Avenger D200 2.5" Grip Head (Black)

Aluminum Construction, 5/8" Stand Mount
Special order from Supplier Usually ships in 6-8 Weeks

Kupo KS-022 Baby 5/8"(16mm) Grip Arm Pin

5.0"(12.7cm) Long, Steel Construction
In stock Ships today

Kupo KCP-220 20" (50.8cm) Grip Arm With Big Handle (Silver Machined Finish)

Rough Non-Slip Surface, Aluminum & Steel
Usually ships in 8 - 12 weeks

Kupo KS-046 Baby 3"(7.62m) Wall Plate, Baby 5/8"(16mm) Stud

Eight Anchor Points, Chrome-Plated Steel Finish
Usually ships in 8 - 12 weeks

Kupo KS-017 Universal 5/8" Stud, 3/8"-16 M & 1/4"-20 M Threads

Double-Sided Stud, Fits into Any 5/8" Receiver
Usually ships in 8 - 12 weeks

Manfrotto 163-38 Male Adapter 1 1/8" (28mm)

  • "Junior" Size Stud
  • 3/8" (9.5mm) Thread
Usually ships in 6 - 9 days

Impact Double Ball Joint Head

A handy accessory for mounting lights or other gear
In stock with supplier Usually ships in 6 - 9 days

Litepanels BP Baby Pin -1/4-20 to Light-Stand Stud Adapter

Adapter screws into a 1/4-20 hole and adapts to a light-stand stud
In stock Ships today
$31.95
You Pay: $26.00

Impact TVMP Yoke to Baby or Junior Adapter

Allows light fixtures that have no stud to be mounted on a light stand
In stock Ships today

Dracast 360-Degree Swivel Mount

360° Swivel Head, Works with 3/8"-16, Works with 1/4"-20
In stock Ships today

Avenger E250 Long Double 5/8" Baby Pin

Zinc-plated Steel Construction
Usually ships in 6 - 9 days

Impact CA-106 Junior to Baby Pin Adapter

1 1/8" (28 mm) and 5/8" (16 mm) spigots
In stock Ships today
$39.95
You Pay: $32.00

Impact Collapsible Reflector Holder

Holds 60" Round Collapsible Reflector, Light and Compact
In stock with supplier Usually ships in 6 - 9 days

Manfrotto 027 Light Stand Holder

Mounts to a wall and holds 8 light stands by their top studs
No supplier stock Usually ships in 8 - 12 weeks

Impact Scissor Mount for Drop Ceilings

Enables attachment of small lights and accessories to the grid
In stock with supplier Usually ships in 6 - 9 days

Kupo KCP-101 Max Arm

Adjustable Aluminum Arm, Two Studs Attached to Ball Joints
In stock Ships today

Kupo KS-048 Junior 3"(7.62cm) Wall Plate, Junior 1-1/8" Receiver

Eight Anchor Points, Metal Locking Knob, Chrome-Plated Steel Finish
In stock Ships today

Impact CA-111 5/8" Male to 1/4"-20 Male Screw Adapter

Allows you to mount an accessory onto a 5/8" female stand
In stock with supplier Usually ships in 6 - 9 days

Manfrotto 119 Adapter Spigot

Features a double female thread with a 1/4 inch and a 3/8 inch thread.
In stock Ships today

Manfrotto 620-10 Male Adapter

Used to add a mount to the yoke of a heavy cinema light by M10 screw.
In stock with NZ supplier Usually ships in 1 - 2 days

Kupo KCP-450 4-1/2" Grip Head With 1-1/8" Stud and Receiver

Supports 5/8"(16 mm) and 3/8" Accessories, Holds Large Overhead Frames
In stock Ships today

Manfrotto 118 Spigot with Double Male Thread

A 16mm spigot with double male thread 1/4 inch and 3/8 inch.
In stock with NZ supplier Usually ships in 1 - 2 days

Manfrotto 016 Broncolor Adapter (Silver)

Converts a 5/8 inch stud to a 1/4 inch threaded tip.
Usually ships in 6 - 9 days

Impact Grip Head for Lights and Accessories - 2.5" Diameter (Black)

Mounts Lights / Accessories on C-Stands
In stock with supplier Usually ships in 6 - 9 days

Avenger D250 Gag Gobo Grip Head

Aluminum Alloy Construction, Double Grip Head
Special order from Supplier Usually ships in 6-8 Weeks

Impact 5/8" Snap-in Pin for Super Clamps (Black)

Used to connect a lighting fixture to a Super Clamp
In stock with supplier Usually ships in 6 - 9 days

Impact 6" Pin with Collar

Chrome plated steel pin with collar
In stock with supplier Usually ships in 6 - 9 days

Avenger F810 Baby Plate with 5/8" Swivel Spigot

Chrome-plated Steel Construction, Large T-Handle, 5/8" Baby Pin
Special order from Supplier Usually ships in 6-8 Weeks

Avenger F301 Baby Wall Plate (Chrome-plated)

Chrome Steel Construction, Baby 5/8" Locking Receiver, 3.5 x 6.0" Base
Special order from Supplier Usually ships in 6-8 Weeks

Manfrotto 066 Double Female Stud for Super Clamp

  • Double ended stud
  • 1.6 cm diameter stud
  • Extend an existing threaded stud
Usually ships in 6 - 9 days

Manfrotto 264 Rounded Lighting Stud

  • 5/8" male stud
  • Locking wingnut
  • Use it in a yoke mount
Usually ships in 6 - 9 days

Kupo KS-019 Swivel Extension Arm, Hex Stud to 5/8"(16 mm) Receiver

For Convi & Super Viser Clamps, Double Ball Elbow Joint
Usually ships in 8 - 12 weeks

Avenger D520LB 40" Extension Arm (Black)

Zinc-plated Steel and Aluminum Alloy Construction
Special order from Supplier Usually ships in 6-8 Weeks

Impact 5/8" Receptor to Long 3/8" Diameter Stud

Converts studs for fixtures that accept nothing larger than 3/8"
In stock with supplier Usually ships in 6 - 9 days

Matthews Monitor Mount for Baby (5/8") Spigot

  • Compact Aluminium
  • 29.5 kg Capacity
  • Folds Flat to Your Monitor
  • Maximum Tilt is ±45°
  • Locking Pan & Tilt Handles
Usually ships in 6 - 9 days

Kupo KS-097 Baby Ball Head Adapter

Mount Tripod Head to Light Stand, Three Set Screws to Lock Down Head
In stock Ships today

Manfrotto 203 Extension Arm for Mini Clamp

  • Requires Mini Clamp
  • Extends 12 cm
  • 1/4"-20 and a 3/8" screw thread
Usually ships in 6 - 9 days