Mounting Hardware
Kupo KCP-101 Max Arm
- Adjustable Aluminium Arm
- Two Studs Attached to Ball Joints
- Central Elbow Rotates 360°
- Quick, Easy Positioning
Usually ships in 8 - 12 weeks
You Pay:
$139.00
Matthews Grid Clamp with Grip Head (2.5")
- Double Hand Wheels, no Tools Required
Usually ships in 6 - 8 weeks
You Pay:
$319.00
You Pay:
$12.95
Kupo KCP-616 Duck Bill Clamp
- For Holding Bead Board, Foamcore, Etc.
- Clamps Onto Flat Surfaces Like Tabletops
- 5/8" Baby Pin
- Adjustable Vice Grip
- Also Known as Platypus Clamp
Usually ships in 8 - 12 weeks
You Pay:
$139.00
Kupo KCP-450 4-1/2" Grip Head With 1-1/8" Stud and Receiver
- Supports 5/8" and 3/8" Accessories
- Holds Large Overhead Frames
- Two Rotating Discs with V-Shaped Jaws
Usually ships in 8 - 12 weeks
You Pay:
$109.00
9.SOLUTIONS Savior Clamp with 5/8" Socket
- Load Capacity: 29.9 kg
- Weighs 0.49 kg
- 6.6 cm Jaw Opening
Usually ships in 4 - 6 weeks
You Pay:
$119.00
Kupo KS-200 Stand Adapter, Junior 1-1/8" Stud to Baby 5/8" Stud
- 5/8" receiver to 1-1/8" receiver
Usually ships in 8 - 12 weeks
You Pay:
$29.95
Kupo KS-084 Quick Release Adapter (1/4"-20)
- 1/4"-20 Male to Male Adapter
- Spring-Loaded Ball Bearing Mechanism
- Accepts Four Different Top Mounts
Usually ships in 8 - 12 weeks
You Pay:
$28.95
Kupo KS-097 Baby Ball Head Adapter
- Mount Tripod Head to Light Stand
- 1.7" Diameter Base with 3/8"-16 Screw
- Three Set Screws to Lock Down Head
- Interior Receptacle: 5/8"
- Exterior Diameter: 1-1/8"
Usually ships in 8 - 12 weeks
You Pay:
$44.95
Kupo KS-051 1/4"-20 Male to 1/4"-20 Male Thread Adapter
- Turns Female 1/4"-20 to Male 1/4"-20
Usually ships in 8 - 12 weeks
You Pay:
$7.95
Avenger F1100 6.0" Pump Cup with Fixed Baby Pin
Rubber and Aluminum Alloy Construction, 5/8" Non-swiveling Pin
Special Order
Contact us for an ETA
You Pay:
$169.00
Kupo KSC-12 Pump Suction Cup with 5/8" Baby Receiver (6")
- Rubber Material with Silicon
- Mounts to Smooth, Non-Porous Surfaces
- Use from 10.4 to 120 Degrees Fahrenheit
Usually ships in 8 - 12 weeks
You Pay:
$87.95
Kupo KCP-411 Off-Set Female Baby Mounting Adapter - Kino Adapter
- Adds Stability
Usually ships in 8 - 12 weeks
You Pay:
$61.95
Kupo KCP-901BB Coupler with Baby Pin for Tube Diameter of 48-51mm
Kupo KCP-901BB Coupler with Baby Pin for Tube Diameter of 48-51mm
Usually ships in 8 - 12 weeks
You Pay:
$79.95
Kupo KCP-414 Super Grip Finger with Round Camera Plate
- Ball Head with Round Camera Plate
- 360° Rotation
- 115° Tilt
- TVMP Adapter for Compatible Equipment
- Three Set Screws for Positioning
- Heavy-Duty Metal Construction
Usually ships in 8 - 12 weeks
You Pay:
$109.00
Manfrotto MF125 Adapter Spigot 3/8"+ 3/8"
- 3/8" + 3/8" Brass Spigot
Special Order
Contact us for an ETA
You Pay:
$12.95
Phottix Double Ended Spigot with 1/4" and 3/8" Male Threads
- Comes with 1/4"-20 and 3/8" male threads
- Serves as a replacement part for compatible lighting equipment.
Usually ships in 2 - 3 weeks
You Pay:
$24.95
Matthews Baby Pin - 5/8" with 3/8" Threaded Tip
- For Use with Lightweight Telescoping Hangers
- Usable with a Variety of Grip Equipment
- Male Threaded Tip
- Screws into Female 3/8" Hole
Usually ships in 6 - 8 weeks
You Pay:
$30.95
Matthews Hollywood Grip Head 2 1/2" (Black)
- 2 1/2" grip head.
- Large knobs.
- Non-slip.
Usually ships in 6 - 8 weeks
You Pay:
$119.00
You Pay:
$53.95
Matthews Hollywood Grip Head 2 1/2"
- 2 1/2" grip head
- Large knobs
- Non-slip
Usually ships in 6 - 8 weeks
You Pay:
$119.00
Kupo KCP-720B Double Convi Clamp (Black Finish)
- Two Clamps Joined Back-to-Back
- Accepts Select Convi Accessories
- Lightweight Alloy Construction
- Stainless Steel Bolts
- Supports up to 20kg
Usually ships in 8 - 12 weeks
You Pay:
$82.95
ANDYCINE A-SC-04 Vlogger Multifunctional Crab Clamp
- Clamping Range of 0.6 to 1.65"
- 1/4"-20 Male and Female
- 3/8"-16 Female and ARRI Accessory Mount
- Rubber-Padded Clamp Jaws
Usually ships in 4 - 6 weeks
You Pay:
$67.95
Kupo KCP-190 U-Grip Gag Grip Head (4.8cm)
- Joins Two 5/8" Tubes
- Single Handle Locks 2 Movements
- Black Anodised Aluminium Alloy
- Ideal for Car Mount
Usually ships in 8 - 12 weeks
You Pay:
$79.95
Kupo KS-031 Snap-In Right-Angle Pin
- Baby Pin on One End, Hex Pin on Other
- For Convi & Super Viser Clamp Systems
- Steel Construction
Usually ships in 8 - 12 weeks
You Pay:
$34.95
You Pay:
$10.95
Kupo KS-092 Baby 5/8" Stud, 2.5" Long for 3 & 4-Way Clamp
- Notch Slides into Mounting Location
- Locking Collar
Usually ships in 8 - 12 weeks
You Pay:
$15.95
Manfrotto MC1990A Pico Clamp
- Load Capacity: 2 kg
- Mounts Gear with 1/4" or 3/8" Threads
- Small, versatile clamp
Special Order
Contact us for an ETA
You Pay:
$75.95
Manfrotto Nano Clamp
- Load Capacity 4kg
- 1/4"-20 & 3/8"-16 Female Threads
- Clamping Range of 1.3cm - 3.5cm
Usually ships in 4 - 6 weeks
You Pay:
$119.00
You Pay:
$26.95
Adam Hall SLTS017 Lighting Stand with TV Spigot Adapter
- Large lighting stand with crossbar and TV spigot adaptors (length 123 cm).
- Includsing set of 4 screws with washer, safety disc and wing nuts
Usually ships in 2 - 3 weeks
You Pay:
$149.00
Sirui Alien Series Suction Cup Mounting Kit
- Fits Devices 2.3 to 3.7" Wide
- Supports up to 1.5kg
- Includes Suction Cup Mount
- Includes Smartphone Clamp
- Includes Articulating Magic Arm
- 7 x 1/4"-20 Holes
Usually ships in 2 - 3 weeks
You Pay:
$81.95
amaran Baby Pin Adapter to 3/8"-16 Screw
- Compatible with amaran T2C/T4C
- For Use with C-Stand or Grip Arm
Usually ships in 4 - 6 weeks
You Pay:
$56.95
Kupo KS-426 Super Knuckle Ball with 3/8"-16 Screw and Locating Pins
- Can Be Mounted on Cage or Handle
- Equipment Doesn't Rotate after Mounting
- Quick Locking Thumbscrew, CNC Aluminium
- Part of Super Knuckle System
Usually ships in 8 - 12 weeks
You Pay:
$85.95
Chauvet CTC-50HCN Narrow Half Coupler
1,650 lb Load Capacity, Aluminum Alloy Construction
Usually ships in 2 - 3 weeks
You Pay:
$45.95
Kupo KCP-826 Slim Type Half-Coupler with 5/8" Baby Stud
- Load Capacity: 100kg
- Maximum Jaw Diameter: 50mm
- Minimum Jaw Diameter: 48mm
- 5/8" Baby Pin Stud
- Extruded Aluminium Construction
- Captive Wingnut
Usually ships in 8 - 12 weeks
You Pay:
$47.95
Kupo KS-024 1/4"-20 Threaded Mounting Plate
- Mounts Accessories to Convi Clamp
Usually ships in 8 - 12 weeks
You Pay:
$25.95
Ulanzi UURig R060 Super Crab Clamp
- Fits Surfaces from 1.5 to 4.3cm Wide
- 1/4"-20 & 3/8"-16 Threads & Screws
- Nonslip Silicone Interior Design
- Locking Lever, Aluminium Construction
- 1 x ARRI-Style Anti-Twist Mount
Usually ships in 4 - 6 weeks
You Pay:
$34.95
CHAUVET CLP-03 Light-Duty C-Clamp for 1-2" Truss (20Kg Capacity)
Adjustable Knob for Tight Fit, 20Kg Capacity
Usually ships in 2 - 3 weeks
You Pay:
$10.95
Kupo KS-062 5/8" (16 mm) Receiver with 3/8"-16 Thread
- Ergonomic Knob
- Includes Locking Nut
Usually ships in 8 - 12 weeks
You Pay:
$17.95
Manfrotto 264 Rounded Lighting Stud
- 5/8" male stud
- Locking wingnut
- Use it in a yoke mount
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$36.95
Kupo KCP-710 Convi Clamp With Adjustable Handle (Silver Finish)
- Ratcheted Handle for Repositioning
- Accepts Select Convi Accessories
- Lightweight Alloy Construction
- Stainless Steel Bolts
- Supports up to 20kg
Usually ships in 8 - 12 weeks
You Pay:
$46.95
Kupo KS-014 Hex Stud 3/8"-16 M & 1/4"-20 M
- For Kupo Convi Clamp System
- Double-Sided Hex Stud
Usually ships in 8 - 12 weeks
You Pay:
$6.95
Kupo KS-016 Double Sided Joining Stud with 90/45 Degree Offset
- Steel Construction
- Rotates in 45 Degree Increments
- Double Hex Head
Usually ships in 8 - 12 weeks
You Pay:
$10.95
Kupo KS-015R Round Stud with 3/8"-16 and 1/4"-20 Female Thread
- Brass Construction
Usually ships in 8 - 12 weeks
You Pay:
$5.95
Kupo KS-079 Baby 5/8" Receiver to Stud Adapter for Elinchrom Heads
- Aluminium Construction
Usually ships in 8 - 12 weeks
You Pay:
$31.95
You Pay:
$31.95
You Pay:
$37.95
Kupo KS-008 Double Sided Hex Joining Stud
- Steel Construction
- Joins 2 Convi Clamps
Usually ships in 8 - 12 weeks
You Pay:
$9.95
Kupo KS-026 Camera Hex Stud, 1/4"-20 M
- Mounts to a Convi or Super Viser Clamp
- Brass Construction
Usually ships in 8 - 12 weeks
You Pay:
$7.95