Light Stands & Mounting
Matthews Snap In Pin - 5/8"
- For Mounting Light Fixtures to a Mafer Clamp
- Standard 5/8" Stud
Usually ships in 6 - 8 weeks
You Pay:
$26.95
Matthews Baby Pin - 5/8" with 3/8" Threaded Tip
- For Use with Lightweight Telescoping Hangers
- Usable with a Variety of Grip Equipment
- Male Threaded Tip
- Screws into Female 3/8" Hole
Usually ships in 6 - 8 weeks
You Pay:
$30.95
Matthews Pin with Collar - 6"
- Small and Easy to Store
- Mount in a Grip Head
Usually ships in 6 - 8 weeks
You Pay:
$61.95
$129.00
You Pay:
$94.00
$129.00
$169.00
You Pay:
$99.00
$169.00
Matthews Junior Boa Weight Bag (4.5kg, Black)
Cordura nylon shell, with two wings
In stock
Ships tomorrow
$149.00
You Pay:
$114.00
$149.00
Matthews MICROgrip Head
- Diameter is Only 1.25" (32mm)
- All the Features of a 2 1/2" Griphead.
- Ideal for Tabletop and Miniature Work.
Usually ships in 6 - 8 weeks
You Pay:
$119.00
Matthews Hollywood Grip Head 2 1/2" (Black)
- 2 1/2" grip head.
- Large knobs.
- Non-slip.
Usually ships in 6 - 8 weeks
You Pay:
$119.00
Matthews Hollywood Grip Head 2 1/2"
- 2 1/2" grip head
- Large knobs
- Non-slip
Usually ships in 6 - 8 weeks
You Pay:
$119.00
Matthews Boa Bag (1.1kg, Black)
- Stabilises Stands, Columns, Booms, etc.
- 2 Sections
- Nylon Construction with Steel Shot
Usually ships in 6 - 8 weeks
You Pay:
$119.00
Matthews Super Mafer Clamp
- Protective Pads in Jaws for Better Grip
- Accepts Snap-In & Standard Baby Pins
- Strengthened to Withstand Great Clamping Pressure
Usually ships in 4 - 6 weeks
You Pay:
$119.00
Matthews Super Mafer Clamp with Baby 5/8" Pin
- Strengthened to withstand greater clamping pressure
- Protective pads in the jaws have been reformulated for better gripping action
- Comes with a snap-in pin
Usually ships in 6 - 8 weeks
You Pay:
$129.00
Matthews Baby Pipe Clamp with 5/8" Pin
- 5/8" pin for mounting
- Safety chain and pin
Usually ships in 6 - 8 weeks
You Pay:
$129.00
Matthews Super Mafer Clamp with 5/8" Pin - Black
- A Baby (5/8" diameter) snap-in pin is included for mounting light fixtures.
- Snap-in pins have a hexagonal end that locks into place in the Mafer Clamp.
Usually ships in 6 - 8 weeks
You Pay:
$129.00
You Pay:
$139.00
Matthews Mini Matthellini
- 3/8"-16 Male Thread
- End Jaw Design
- Jam Nut to Prevent Rotation
Usually ships in 6 - 8 weeks
You Pay:
$149.00
Matthews Matthellini Clamp (6" End Jaw, Silver)
- 5/8" Pin
- Steel Construction
Usually ships in 6 - 8 weeks
You Pay:
$149.00
Matthews Matthellini Clamp (3" Center Jaw, Silver)
Provides strong, solid gripping of round, square or rectangular tubing and many other common and irregular shapes.
Usually ships in 6 - 8 weeks
You Pay:
$149.00
Matthews Baby Boa Weight Bag (2.2kg, Black)
Weighs 2.2kg, Cordura nylon shell, with 2 wings
Usually ships in 6 - 8 weeks
You Pay:
$149.00
Matthews Infinity Arm Anti-Rotation Tip
- 3/8” threaded pin mount with indexing pins
- Precision machined ball mount pairs with Infinity Arm
- Black anodize coating
Pre-Order
ETA to be confirmed
Full Price:
$159.00
Deposit:
$15.00
Matthews Matthellini Clamp (2" End Jaw, Silver)
Provides strong, solid gripping
Usually ships in 6 - 8 weeks
You Pay:
$189.00
You Pay:
$199.00
Matthews MQ Mount for LED and Fluorescent Light Tubes
- For T-12 LED & Fluorescent Tubes
- Anti-Crush Jaws
- Compatible with all Grip Heads
- 1/4"-20-Tapped 3/8" Pin
Usually ships in 6 - 8 weeks
You Pay:
$209.00
You Pay:
$219.00
Matthews The Claw Rigging Clamp for Tube Lights
- Textured rubber to grip without surface damage.
- Lightweight with black finish
- Low-profile 5/8” pin mounts
- Magnets keep claw fingers open when mounting
Usually ships in 6 - 8 weeks
You Pay:
$219.00
Matthews MERF Mini Extendable Reverse Stand
- Small, Robust Light Stand.
- Maximum Height: 2.2m
- Folded Length: 0.5m
- Load Capacity: 4kgs
Usually ships in 6 - 8 weeks
You Pay:
$229.00
Matthews Reverse Stand 7' (2.1m)
Best suited for location work, it can fold back on itself into a very compact package only 22.75" (58 cm) long.
Usually ships in 6 - 8 weeks
You Pay:
$249.00
Matthews Hollywood Head and Arm 40" (Black)
- Made of Stainless Steel
- T-Handles are ergonomically designed
- Comes with a Hollywood Grip Head attached to one end
- Strongest Grip Head in the business
- Additional Grip Head for positioning
Usually ships in 6 - 8 weeks
You Pay:
$259.00
Matthews C - Clamp with 2- 5/8" Baby Pins - 6"
- 2 Separate 5/8" Diameter Pins
- Clamp Jaw Offers a Maximum 6" Opening
- Allows Light Fixtures to Fit with Minimal Clearance
Usually ships in 6 - 8 weeks
You Pay:
$269.00
Matthews Senior Boa Weight Bag (6.8kg, Black)
Black Cordura nylon, Weighs 6.8kg
Usually ships in 6 - 8 weeks
You Pay:
$269.00
Matthews Quacker Clamp
- AKA - Duck Bill or Platypus Clamp
- For Positioning Foam Core, Reflector or Bead Board
Usually ships in 6 - 8 weeks
You Pay:
$269.00
Matthews Medium Duty Kit Stand with Brake 2.3m (Black)
- Designed primarily for their use in lighting kits these stands are compact and light weight
- Ideal for assembling custom lighting kits or as a replacement
- Brake shoe system for locking off the riser tubes as opposed to pinch castings therefore permitting the use of heavier fixtures
- Footprint: 32"/813mm
- Weight: 3.5lbs/1.5kg
- Min/Max Height: 30"/92.5", 76mm/2350mm
- Load Capacity: 20lbs/9kg
- Folding Base: 3"/76mm
Usually ships in 6 - 8 weeks
You Pay:
$279.00
Matthews Revenger Light Stand 3.3m (Black)
- Designed primarily for use in lighting kits
- Compact and lightweight
- Black finish aluminium stands
- 3 riser sections
- Weight: 4 lbs (1.8kg)
- Min/Max Height: 38"/128" (930mm/3130mm)
- Load Capacity: 22 lbs (10kg)
- Folded Base: 5" (127mm)
Usually ships in 6 - 8 weeks
You Pay:
$289.00
Matthews Hollywood Grip Head 4 1/2"
- 1-1/8" Junior Pin
- Aluminium Construction
Usually ships in 6 - 8 weeks
You Pay:
$299.00
Matthews Grid Clamp with Grip Head (2.5")
- Double Hand Wheels, no Tools Required
Usually ships in 6 - 8 weeks
You Pay:
$319.00
Matthews Maxi Kit Steel Stand - 2.8m
- Compact & Lightweight
- Chrome Finish
- Load Capacity 11 kg
- 5/8" Stud to Mount
- Working Height Range of 0.9 m to 2.3 m
Usually ships in 6 - 8 weeks
You Pay:
$399.00
Matthews Medium Duty Maxi Kit Stand 2.8m (Black)
- Aluminium Construction.
Usually ships in 6 - 8 weeks
You Pay:
$419.00
Matthews Monitor Mount for Baby (5/8") Spigot
- Compact Aluminium
- 29.5 kg Capacity
- Folds Flat to Your Monitor
- Maximum Tilt is ±45°
- Locking Pan & Tilt Handles
In stock
Ships tomorrow
You Pay:
$499.00
Matthews Light/Heavy Triple Riser Kit Stand 3.8m
- Light / Heavy Triple Riser Light Stand
- Designed primarily for their use in lighting kits
- Brake shoe system for locking off the riser tubes
- Terminates with an industry standard 5/8" spud
Usually ships in 6 - 8 weeks
You Pay:
$529.00
You Pay:
$569.00
Matthews Hollywood Century 3.2m C Stand Grip Head Kit with 101cm Grip Arm (Black)
- 40" (100 cm) Double Riser Black "C" Stand
- Sliding Leg
- 40" (100 cm) Arm with Griphead
- Allows Mounting & Placement of Gobos, Small Reflectors & Light Fixtures
Usually ships in 6 - 8 weeks
You Pay:
$609.00
Matthews Hollywood Century C Stand with Arm & Grip Head 1.6m (Chrome)
- 20" (50cm) Main Riser
- 2 Risers
- Sliding Leg
- 20" (50cm) Arm with Grip Head
Usually ships in 6 - 8 weeks
You Pay:
$629.00
Matthews Hollywood 1.6m C-Stand with Sliding Leg Grip Head and 50cm Arm (Black)
- 50cm Riser
- Stands Will Nest, Saving Valuable Space
- 1 Sliding Leg for Use on Uneven Surfaces
- Grip Head & Arm to Position Flags, Etc.
Usually ships in 6 - 8 weeks
You Pay:
$629.00
Matthews Hollywood Century C Stand Grip Arm Kit - 10.5' (3.2m)
40" Double Riser "C" Stand, Sliding Leg, 40" Arm with Griphead
Usually ships in 6 - 8 weeks
You Pay:
$639.00
Matthews Century C+ Stand with Turtle Base and Grip Arm Kit 3.2m (Chrome)
- 40" (101cm) Main Section
- Detachable Turtle Base
- Two Risers
- 40" (101cm) Arm and Grip Head
In stock
Ships tomorrow
You Pay:
$699.00
Matthews Century C+ Turtle Base Grip Arm Kit (3.2m, Black)
- 40" (101cm) Main Section
- Removable Turtle Base
- 40" (101cm) Arm & Grip Head
Usually ships in 6 - 8 weeks
You Pay:
$729.00
You Pay:
$729.00
Matthews Mini Slider Stand (38")
- Load Capacity: 80 lb
- Maximum Height: 38"
- Minimum Height: 20"
- Footprint: 19"
- Weight: 10 lb
Usually ships in 6 - 8 weeks
You Pay:
$759.00
Matthews 1.6cm C+ Stand with Turtle Base, Grip Head and 50cm Arm Kit (Black)
- 50cm Riser, 2.5" Grip Head
- 50cm Grip Arm
- 160cm Maximum Height
Usually ships in 6 - 8 weeks
You Pay:
$769.00
Matthews Century C+ Turtle Base Grip Arm Kit 1.6m (Chrome)
- Removable Turtle Base
- 20" (50cm) Main Section
- 2 Risers
- 20" (50cm) Arm, Grip Head
Usually ships in 6 - 8 weeks
You Pay:
$769.00