The black E10 10” Two-Way Passive Loudspeaker from QSC is a compact, two-way loudspeaker with a 10”, die cast frame woofer with a 2.5” voice-coil housed in a multi-purpose enclosure for stage monitor or main PA deployment. It incorporates QSC DMT (Directivity Matched Transition) design with an 85° wide coverage. When used as a stage monitor, the E10 Loudspeaker is angled up at 55°, allowing it to be placed near the performer when used on a crowded stage.
An all metal, dual-angle, 35mm socket allows the loudspeaker to be mounted vertically on a pole or angled down by 10° to improve audience coverage, and reduce rear wall reflections. Multiple mounting options using E Series Yoke or M8 eyebolts (sold separately) are supported. Input connections include dual NL4 as well as screw terminal receptacles.
Features
- 300W continuous, 1200W peak
- E Series Entertainment System offers advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers
- Rugged tour-grade textured paint
- Foam-lined perforated steel grill
- Constructed of rugged plywood and coated in black, textured paint
- Dual angle pole socket
Specifications
| Configuration | 1 x 10", 2-way, non-powered |
| Frequency Range | 68 to 20 kHz |
| Power Capacity | 300 W (continuous) / 1200 W (peak) |
| Sensitivity | 95 dB, 1 W @ 3.2' (1 m) |
| Coverage Angle | 85° conical |
| Output | 126 dB |
| Drivers | LF: 10" (25.4 cm) driver with 2.5" (64 mm) voice coil HF: 1" (25 mm) exit, 1.75" (45 mm) voice coil, compression driver |
| Nominal Impedance | 8 Ohms |
| Crossover | Full-range only, 1.8 kHz |
| Input Connectors | 2 x NL4 1 x barrier strip |
| Enclosure | Multi-angle, plywood, black texture paint finish. One top mounted handle. Perforated, powder-coated steel grille with foam lining |
| Suspension | 6 x M8 suspension points, dual angle, 35 mm pole-socket |
| Dimensions | 13 x 22 x 13" (33 x 56 x 33 cm) |
| Weight | 44 lb (20 kg) |
