SKB
SKB 3I-2011-7DL iSeries Case with Think Tank Photo Dividers and Lid Organizer
- Watertight, Dustproof Moulded Outer Shell
- Padded Insert & Touch-Fastening Dividers
- Holds 2 Cameras, up to 7 Lenses & More
- Top-Loading iPad/Laptop Pocket
- Latch Closure & Metal Locking Loops
Usually ships in 8 - 12 weeks
You Pay:
$589.00
SKB Mixer Safe 34 Universal Mixing Board Case
- ATA rated
- For wider non-rackable mixers
- Durable twist latches
- Cushioned rubber feet
- Spring-loaded handles
Usually ships in 8 - 12 weeks
You Pay:
$619.00
SKB Mid-sized Drum Hardware Case (Black)
- Holds Seats, Pedals, Mounts
- Two Built-in Roller Blade Wheels
- Telescoping, Moulded Pull-out Handle
- Removable Lid
- Dual Nylon Web Cinch Closure
- Rated to Fit in Back Seat of Car
Usually ships in 8 - 12 weeks
You Pay:
$629.00
SKB 3I-2015-10BE iSeries Injection Molded Mil-Standard Waterproof Case
- Continuous Molded-In Hinge
- Gasket Seal
- Built-in Pull Handle and Wheels
- Ultra High-Strength Polypropylene Copolymer Resin
- Locking Loop
- Trigger Release Latch System
Usually ships in 8 - 12 weeks
You Pay:
$629.00
SKB 1SKB-R6U 6U Roto Rack
- Rotationally Moulded Polyethylene Plastic
- Front and Rear Steel Rack Rails
- Recessed Steel Twist Latches
- Front and Rear Gasket Covers
- Heavy-Duty Flush-Mount Handles
In stock
Ships today
You Pay:
$629.00
SKB 3I-1914N-8B-C Waterproof Case with Cubed Foam (42.9 x 22.4 x 51.6 cm interior)
- Waterproof / Gasket Sealed
- ATA 300 Rated
- Impact-Resistant / Dust Tight
- UV,Solvent,Corrosion,Fungus-Resistant
- Moulded-in Hinge
Usually ships in 8 - 12 weeks
You Pay:
$639.00
SKB 3I-1914-8B-E Mil-Std Waterproof Case 8" Deep (Black)
- Polypropylene Copolymer Resin Case
- Gasketed, Waterproof and Dust-Tight
- ATA Category 1 Rated
- Continuous Moulded-in Hinge
- Trigger Release Latch System
Usually ships in 8 - 12 weeks
You Pay:
$669.00
SKB 8U Roto Rack Rack Case
- Rotationally Moulded Polyethylene Plastic
- Front and Rear Steel Rack Rails
- Recessed Steel Twist Latches
- Front and Rear Gasket Covers
- Heavy-Duty Flush-Mount Handles
Usually ships in 8 - 12 weeks
You Pay:
$669.00
SKB Trap ATA Stand Case with Wheels - holds Audio and Lighting Stands up to 36 1/2 x 11 7/8 x 8 1/4"
- For Lighting, Audio, & Sports Equipment
- Fits Mic Stands and Drum Hardware
- ATA Certified
- Polyethylene Hard-Shell Construction
- Inline Skate Wheels
Usually ships in 8 - 12 weeks
You Pay:
$669.00
SKB AUV-1 Amp Utility Vehicle Case
Designed to carry and hold all 2-12 style mid-size combo amps.
Usually ships in 8 - 12 weeks
You Pay:
$669.00
SKB 3i-2217-10BE iSeries Injection Molded Mil-Standard Waterproof Case
- Continuous Molded-In Hinge
- Gasket Seal
- Built-in Pull Handle and Wheels
- Ultra High-Strength Polypropylene Copolymer Resin
- Locking Loop
- Trigger Release Latch System
Usually ships in 8 - 12 weeks
You Pay:
$679.00
SKB 3i-1813-7WMC iSeries Injection Molded Mil-Standard Waterproof 8-Wireless Mic Case
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Snap-Down Rubber Over-Molded Cushion Grip Handle
- Trigger Release Latch System
- Ambient Pressure Equalization Valve
Usually ships in 8 - 12 weeks
You Pay:
$679.00
SKB 3i-3614-TKBDi Series Injection Molded Mil-Standard Waterproof Case 49-Note Keyboard Case
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Snap-Down Rubber Over-Molded Cushion Grip Handle
- Pull Handle & Wheels for Easy Towing
- Ambient Pressure Equalization Valve
Usually ships in 8 - 12 weeks
You Pay:
$679.00
SKB Roto Molded 10U Top Mixer Rack
- 10U Slanted Rackmount, Stackable
- Roto Molded Linear Medium Density Polyethylene
- Steel Threaded Rails
- Hard Lid & Removable Back Door
- Side Access Ports for Cables
- Carry Handles & TSA Locking Trigger Latches
Usually ships in 8 - 12 weeks
You Pay:
$679.00
SKB 1SKB-D1620 16 x 20 Bass Drum Case
- Sackable
- Pedestal Feet
- Padded Interiors
- High Tension Slide Release Buckle
- Heavy-Duty Web Strap
- Patented Roto-X Pattern
Usually ships in 8 - 12 weeks
You Pay:
$679.00
SKB iSeries RODECaster Pro II Hard-Shell Case
- Form-Cut Foam for RODECaster Pro II
- Main Pocket Holds up to Two PodMics
- 2 x Accessory Pockets
- MIL-STD 810G Waterproof Case
- Moulded Polypropylene Copolymer Resin
- Gasket-Sealed Design
Usually ships in 8 - 12 weeks
You Pay:
$689.00
SKB 4/4 Cello Shell Case
- Scratch resistant granite finish
- Built-in wheels
- Ergonomically crafted grip handles
- Two interior pockets
- Holds two bows
Usually ships in 8 - 12 weeks
You Pay:
$719.00
SKB 3I-2424-10BE iSeries Injection Molded Mil-Standard Waterproof Case
- Watertight, Dustproof Case
- Built-In Purge Valve
- Wheels, Trolley Handle, Large Handles
- Latch Closure
Usually ships in 8 - 12 weeks
You Pay:
$729.00
SKB 1SKB-D1622 16 x 22" Bass Drum Case
- Sackable
- Pedestal Feet
- Padded Interiors
- High Tension Slide Release Buckle
- Heavy-Duty Web Strap
- Patented Roto-X Pattern
Usually ships in 8 - 12 weeks
You Pay:
$729.00
SKB 3i-2217M82U 2U iSeries Injection Moulded Fly Rack (13")
- 2U removable injection moulded shock rack cage
- 13 inch rack depth
- Interior foam protection
- Interior foam protection
- Ultra high-strength polypropylene copolymer resin case
Usually ships in 8 - 12 weeks
You Pay:
$759.00
SKB 1SKB-R1906 Roto Molded Rack Expansion Case with Wheels
- Nylon Web Cinch Straps
- TSA Glass Reinforced Nylon Trigger Latches
- Durable Dual Locking 5" Wheels
- Rack Units: 6
- Front & Rear Rails
Usually ships in 8 - 12 weeks
You Pay:
$769.00
SKB iSeries Injection Molded Mil-Standard Waterproof Case with Dividers and Photo Backpack
- Watertight, Dustproof Moulded Outer Shell
- Padded Insert & Touch-Fastening Dividers
- Holds 2 Cameras, up to 5 Lenses & More
- Latch Closure & Metal Locking Loops
- Automatic Equalisation Valve
Usually ships in 8 - 12 weeks
You Pay:
$769.00
SKB 1SKB-R4UW Roto Rolling Rack Case (4 RU)
- 4 RU of Rack Space
- One-Touch Pull Handle
- Rolling Wheels on Back Lid
- Military-Grade Butterfly Latches
- Threaded Steel Rails
Usually ships in 8 - 12 weeks
You Pay:
$769.00
SKB Injection-Molded 2 RU Studio Flyer Rack Case
- Compact Carry-On Size
- Waterproof and Impact-Resistant
- Moulded-In, Front and Rear Rack Rails
- 2 RU Studio Rack and Laptop Combo Case
- Cord Pockets
In stock
Ships today
You Pay:
$769.00
SKB 1SKB-R104 Audio and DJ Rack Case (Black)
- Two TSA Locking Patented Trigger Latches
- Stackable for Storage and Transport
- 10U Slanted Top Rackmount
- 4U Front Rackmount
- Hard Lid and Doors
Contact us for an ETA
Price On Request
Contact us for more information
SKB R-Series 2222-12 Case with Wheels
- Waterproof & Dust Tight Design (MIL-C-4150J / IP67)
- LLDPE Polyethylene Impact Resistant
- Resistant to UV, Solvents, Corrosion, Fungus (MIL-STD-810F)
- Pressure Relief / Breather Valves
- Resistant to Impact Damage (MIL-STD-810F)
Usually ships in 8 - 12 weeks
You Pay:
$769.00
SKB 10U Roto Rack Rack Case
- Rotationally Moulded Polyethylene Plastic
- Front and Rear Steel Rack Rails
- Recessed Steel Twist Latches
- Front and Rear Gasket Covers
- Heavy-Duty Flush-Mount Handles
In stock
Ships today
You Pay:
$769.00
SKB 1SKB-R102 10x2 Roto Rack Case
- Slanted 10U Top and Standard 2U Front
- Roto-Moulded One-Piece Base
- Side Access Port for Cables
- Works with the SKB AV-8 Shelf
Usually ships in 8 - 12 weeks
You Pay:
$769.00
SKB 1SKB-455W Contoured Pro Baritone Sax Case with Wheels
- ABS Vacuum Formed Material
- Plush Lined EPS Interior
- In-Line Wheels for Easy Transport
- TSA Locks
- Molded-in Bumper Protection
- Accommodates Low Bb or Low A Baritone Saxophones
Usually ships in 8 - 12 weeks
You Pay:
$779.00
SKB SKB iSeries Injection Molded Mil-Standard Waterproof Roland AX Edge Keytar Case
- Accommodates a Roland AX Edge Keytar and accessories
- Wheels and Pull Handle
- Accessory Compartment
- Waterproof & Dust Tight Design (MIL-C-4150J / IP67)
- Molded-in Hinge for AddedProtection
Usually ships in 8 - 12 weeks
You Pay:
$779.00
SKB 3i-4214-TKBD iSeries Injection Molded Mil-Standard Waterproof Case Narrow 61-Note Keyboard Case
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Snap-Down Rubber Over-Molded Cushion Grip Handle
- Pull Handle & Wheels for Easy Towing
- Ambient Pressure Equalization Valve
Usually ships in 8 - 12 weeks
You Pay:
$779.00
SKB 3i-2918-10BE iSeries Injection Molded Mil-Standard Waterproof Case
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Oversized Double Grip Carrying Handle
- Ambient Pressure Equalization Valve
- Built-In 2" Wheels
Usually ships in 8 - 12 weeks
You Pay:
$779.00
SKB 1SKB-D1820 18 x 20 Bass Drum Case
- Stackable
- Pedestal Feet
- Padded Interiors
- Heavy-Duty Web Strap
- Grip Handles with a 90° Stop
- Sturdy High Tension Slide Telease Buckle
Usually ships in 8 - 12 weeks
You Pay:
$779.00
SKB 3i-1717-16LT iSeries Dual Snare Waterproof Utility Case
- Think Tank-designed Nylex-wrapped fitted foam liner
- Reinforced locking loops for customer supplied locks
- Waterproof and dust tight design (MIL-STD 810G)
- Molded-in hinge for added protection
- Trigger release latch system
Usually ships in 8 - 12 weeks
You Pay:
$789.00
SKB Trap X2 Drum Case (Black)
- Top Loading Case/Holds Six Cymbals,Snare
- Convenient, Removable Tray Storage
- Integrated Fold-Down Cymbal Vault
- Removable Lid / Carpeted Interior
- 4" Locking Wheels with Brakes
Special Order
Enquire for ETA
You Pay:
$819.00
SKB 3i-3021-18BC iSeries Injection Molded Mil-Standard Waterproof Case
- Polypropylene Copolymer Resin
- Waterproof and Dust Tight Design
- Resistant to Corrosion and Impact Damage
- Ambient Pressure Equalisation Valve
- Moulded-In Hinge Design
Usually ships in 8 - 12 weeks
You Pay:
$819.00
SKB 1SKB-D1822 Bass Drum Case 18 x 22"
- Holds One 45.7 x 55.9 cm Bass Drum
- Roto-Moulded-X Design / Stackable
- Padded Interior for Added Protection
- Pedestal Feet for Upright Positioning
- Heavy-Duty Web Strap / Reliable Closure
Usually ships in 8 - 12 weeks
You Pay:
$819.00
SKB SKB3I-1914-8B-C Military Standard Case
- Polypropylene Copolymer Resin Case
- Gasketed, Waterproof and Dust-Tight
- ATA Category 1 Rated
- Continuous Moulded-in Hinge
- Trigger Release Latch System
Usually ships in 8 - 12 weeks
You Pay:
$819.00
SKB 3i-2918-14BE iSeries Injection Molded Mil-Standard Waterproof Case
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Oversized Double Grip Carrying Handle
- Ambient Pressure Equalization Valve
- Built-In 2" Wheels
Usually ships in 8 - 12 weeks
You Pay:
$829.00
SKB 1SKB-R6UW Roto Rolling Rack Case (6 RU)
- 6 RU of Rack Space
- One-Touch Pull Handle
- Rolling Wheels on Back Lid
- Military-Grade Butterfly Latches
- Threaded Steel Rails
In stock
Ships today
You Pay:
$859.00
SKB Bass Drum Case 20 x 22" (Black)
- Holds One 20 x 22" Bass Drum
- Roto-Moulded-X Design / Stackable
- Padded Interior for Added Protection
- Pedestal Feet for Upright Positioning
- Heavy-Duty Web Strap / Reliable Closure
Usually ships in 8 - 12 weeks
You Pay:
$859.00
SKB-H5020W ATA XL Stand Case
- Moulded-in bumpers
- Field replaceable components
- Sure-grip handle
- Roto-moulded indestructability
Usually ships in 8 - 12 weeks
You Pay:
$859.00
SKB 3i-5014-TKBD iSeries Injection Molded Mil-Standard Waterproof Narrow 76-Note Keyboard Case
- Customised Interior by Think Tank
- Injection-Moulded Polypropylene Resin
- 16 x Foam Blocks for Secure Fit
- Waterproof, Submersible Design
- Resists UV, Solvents, Corrosion & Fungus
Usually ships in 8 - 12 weeks
You Pay:
$869.00
SKB 3i-2217-10BC iSeries Injection Molded Mil-Standard Waterproof Case
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Snap-Down Rubber Over-Molded Cushion Grip Handle
- Layers of Cubed Foam & Padlock Locking Loops
- Ambient Pressure Equalization Valve
Usually ships in 8 - 12 weeks
You Pay:
$869.00
SKB 3i-4214-OP iSeries Injection Molded Mil-Standard Waterproof Open Cavity Electric Guitar Case
- Accessory Compartment
- Full Neck Support
- Quiet-Glide Wheels
- Stainless-Steel Moulded-in Hinges
- Corrosion & Impact Resistance
- Accessory compartments
Usually ships in 8 - 12 weeks
You Pay:
$869.00
SKB 3i-2011M72U iSeries Injection Molded Mil-Standard Waterproof Shallow Fly Rack (9")
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Snap-Down Rubber Over-Molded Cushion Grip Handle
- Trigger Release Latch System
- 9"/ 22.86 cm Rack Depth
Usually ships in 8 - 12 weeks
You Pay:
$869.00
SKB 3i-2011M103U iSeries Injection Molded Mil-Standard Waterproof Shallow Fly Rack (9")
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Snap-Down Rubber Over-Molded Cushion Grip Handle
- 9"/ 22.86 cm Rack Depth
- Built-in Wheels & Pull Handle
Usually ships in 8 - 12 weeks
You Pay:
$869.00
SKB iSeries Injection Molded Mil-Standard Waterproof Case for Blackmagic Design ATEM TV Studio
- Fits Blackmagic Design ATEM Television Studio Pro HD or Pro 4K
- Watertight Gasket Seal
- Stainless Steel Moulded-in Hinges
- Over-Molded Cushion Grip Handle
- Padlock Loops
- UV, Solvents, Corrosion, Fungus & Impact Resistant
Usually ships in 8 - 12 weeks
You Pay:
$869.00
SKB iSeries Injection Molded Mil-Standard Waterproof Strat/Tele Flight Case
- Watertight Gasket Seal
- Stainless Steel Moulded-in Hinges
- Quiet-Glide Wheels
- Accessory Compartment
- Full Neck Support
Usually ships in 8 - 12 weeks
You Pay:
$869.00
SKB 3i-2015-10BC iSeries Injection Molded Mil-Standard Waterproof Case
- Molded-In Hinge
- Gasket Seal
- Ultra High-Strength Polypropylene Copolymer Resin
- Snap-Down Rubber Over-Molded Cushion Grip Handle
- Built-in Roller Blade Wheels
- Cubed Foam Interior
Usually ships in 8 - 12 weeks
You Pay:
$869.00