Samson MXS3000 Professional Power Amplifier
Overview
Description
The MXS3000 Professional Power Amplifier by Samson is for live sound reinforcement. It is used in audio applications that require exceptional sound and high wattage such as DJ setups, houses of worship and health clubs, PA systems, live stage performances, rehearsals and more. It features 1500W of stereo power at 4 Ω and 4600W of bridged mono power at 4 Ω. The two channel amp employs an intelligent switch mode power supply that continuously monitors the signal level. This smart distribution helps eliminate excess heat or wasted energy. The MXS3000 also features low noise fans to ensure its power transformer has cool air.
The MXS3000 is built with a limiter and features dented level controls for each channel, as well as signal, 10dB and peak level LEDs for optimal use on dark stages. It is also built with XLR and 1/4" inputs and has binding post and Speakon outputs. This amplifier has a 3-position filter (120Hz, Full, and 28Hz) selector switch for optimizing the power amps to your specific setup. A power cord in included.
Key Features
- 950W power into 8 Ω provides plenty of power for live sound reinforcement
- A limiter provides peak power delivery while minimizing distortion
- Extensive 4-point protection circuitry (short circuit, DC output, over current, thermal)
- 3-position mode selector switch allows for easy toggling between Mono, Stereo and Bridged Mono modes
- Features LEDs for optimal use on dark stages and indicates your current operating mode and filter settings
Specifications
Rated Output Power |
Stereo Both Channels Driven: 8 Ω 950 W 4 Ω 1550 W 2 Ω 1850 W |
Bridged Mono Output |
8 Ω 3100 W 4 Ω 4600 W |
Signal to Noise Ratio |
20 Hz to 20 kHz: >103 dB |
Distortion |
SMPTE-IM: 0.02% |
Input Sensitivity |
At 8 Ω Voltage Gain: 0 dBu |
Voltage Gain |
At 8 Ω 38 dB |
Output Circuit |
Class H |
Current Consumption |
At 1/8 Rated Power 4 Ω: 670 W At 1/3 Rated Power 4 Ω: 1400 W At Rated Power 4 Ω, Max: 2600 W |
Distortion |
Typical @ 4 Ω: 20 Hz to 20 kHz, 10 dB Below Rated Power: 0.003 % 1 kHz, Rated Power: 0.007% |
Frequency Response |
At 8 Ω 1 W: 20 Hz to 20 kHz +0/-0.2 dB 4 Hz to 50 kHz ±3 dB |
Damping Factor |
400 Hz: >300 |
Input Impedance |
Balanced 20 k/unbalanced 10 k |
Input Clipping Level |
0 dB |
Cooling |
Dual continuously variable speed fan; back-to-front air flow |
Connector |
Inputs: 2 x 3-pin XLR 2 x 1/4" (0.63 mm) TRS, balanced Outputs: 4 x Binding post 2 x Speakon |
Indicators |
Signal, -20 dB, 10 dB, limit, thermal |
Protection |
Amplifier Protection: Thermal, Short, DC output, mismatched loads On/off muting and delay, locked the power amplifiers |
Dimensions (L x W x H) |
19.0 x 14.7 x 3.5" (482 x 375 x 88 mm) |
Weight |
21.6 lb (9.8 kg) |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Samson MXS3000 Professional Power Amplifier
- Manufacturer: Samson
- Model: SAMXS3000
- SKU: SAMXS3000
- RM Product #: 20889