Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter has been discontinued, here are some related products you might like:
Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter
Features
- Up to 1000' Range Line-of-Sight
- Supports up to 1080p60 Resolution
- Backwards Compatible with Select Systems
- 3G-SDI & HDMI Input, 3G-SDI Loop Out
- Zero Delay
Description
With the Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter you can transmit visually lossless 3G video signals to a Bolt 1000 receiver with zero latency. The Bolt XT is compatible with existing 3rd-generation Bolt systems, such as the Bolt 1000, Sidekick II, and 703 Bolt, as well as the Bolt 1000 LT. The transmitter unit itself can be secured to a camera or other SDI/HDMI video source via a built-in 1/4"-20 threaded hole, two M3 threaded holes, and a built-in 3/8"-16 ARRI accessory mount. The included antennas provide a powerful signal that can travel up to 1000' line-of-sight.
A shoe mount is included for attaching to cameras without 1/4"-20 threads. For convenience, both a standard BNC cable and HDMI cable are included, so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector via the included D-Tap power cable. The transmitter supports up to four receivers, built-in AES 128 encryption protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.
Key Features:
- Compatible with Bolt 1000 XT and LT, Sidekick II, and 703 Bolt
- HDMI and 3G-SDI inputs, with 3G-SDI loop-through output on transmitter
- 5 GHz Spectrum Analyser
- Manual channel selection
- Supports 11 channels in the 40 MHz band
- SDI ancillary data support: supports metadata, timecode, and start/stop flags from certain camera manufacturers.
- 1/4"-20 and M3 mounting points
Specifications
**Transmitter ** | |
Construction | Milled aluminium (chassis) and regulation-compliant PCB |
Video Inputs | SDI: 1 x BNC (75 Ohm), 3G/HD/SD HDMI: 1 x HDMI type A receptacle |
Video Outputs | SDI: 1 x BNC (75 Ohm), 3G/HD/SD, loop through |
Colour Sampling | SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled) HDMI: RGB 4:4:4, 8-bit |
Latency | <0.001 seconds (Tx to Rx without format conversion) |
Channels | 40 MHz: 11 (USA) |
Supported Resolutions | 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 480i: 59.94 576i: 50 |
Video Processing | Compression Visually lossless Colour Correction CDL/1024 1D LUT (supports 10-bit colour) 33x33x33 3D LUT (supports 10-bit colour) |
Audio Compression | 48 kHz, 24-bit PCM |
Audio Input | Embedded |
Interfaces | Switches: On/Off and Reset Desktop App: Feature-rich Bolt Manager application for Mac OS X and Windows USB Interface Functionality: Upgrade via mini-USB |
Wireless | Non-DFS Frequencies DFS Frequencies |
RF Power | 17 dBm EIRP |
Encryption | AES-128 |
Range | Up to 500' / 152.4 m line of sight |
Unicast Multicast | Unicast / Multicast |
Noise Rejection | Can coexist with WiFi and 5 GHz cordless phones |
Power Input | 2-pin connector 7 to 17 VDC |
Power Consumption | Nominal 7.3 W (measured at 1080p60) |
Operating Temperature | 32 to 104°F / 0 to 40°C |
Mountable | 1 x 1/4"-20 threaded mounting hole 2 x M3 threaded mounting holes |
Dimensions | 0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm |
Weight | 8 oz / 226 g |
In The Box
- Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter
- D-Tap Power Cable (18")
- Shoe Mount
- Antenna
- SDI Cable (10")
- HDMI Type A to Type A Cable
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter
- Manufacturer: Teradek
- Model: 10-1966
- SKU: 10-1966
- RM Product #: 68929
- Warranty: 1 year manufacturer warranty