Battery Mounting Plates
Wooden Camera WC V-Mount Battery Plate (Dual D-Tap)
- IDX V-Mount
- 12V power
- D-Tap connectors
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$279.00
Wooden Camera Battery Slide Pro for Sony FX6 (V-Mount)
- Attaches to Rear of FX6 Camera
- Supports V-Mount Battery
- Access to BP-U Battery Allows Hot Swaps
- 3 x D-Tap Ports, Protective Digital Fuse
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$879.00
Wooden Camera D-Box 2-Pin LEMO-Compatible Kit V-Mount
- V-Mount Battery Distribution Box
- Fits Between Battery & Camera Mount
- 2x 2-Pin LEMO-Compatbile Outputs
- 2x D-Tap Outputs
- 5V USB Output
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,089.00
Wooden Camera Battery Slide Pro V-Mount for Sony FX9
- Attaches to the Rear of the Camera.
- Supports V-Mount Battery.
- Access to BP-U Battery Allows Hot Swaps.
- 3 D-Tap Ports & Protective Digital Fuse.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$879.00
Wooden Camera Battery Slide for RED KOMODO Camera (Gold Mount)
- Accepts Gold Mount Batteries
- For RED KOMODO Camera
- D-Tap Accessory Port
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$889.00
Wooden Camera Pro V-Mount Battery Plate
Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$409.00
Wooden Camera V-Mount Battery Plate for Sony FS7, FS5, Panasonic EVA1 Cameras
- IDX-V-Mount battery plate
- DC connector
- Two D-Tap connectors
- Minimal cable excess
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$399.00
Wooden Camera - D-Tap To Sony A9, A7RIII (Dummy NP-FZ100)
Powers the Sony A9 or A7rIII camera using any V-Mount or Gold Mount battery with a D-Tap plug
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$259.00
Wooden Camera Micro Battery Slide Pro for Blackmagic Pocket Cinema Camera 6K Pro (V-Mount)
- Supports V-Mount Battery
- Mounts onto Optional 15mm LWS Rods
- Power Camera with 2-Pin LEMO-Type Cable
- Can Hot Swap with Camera Battery
- Provides 14V Power to Camera
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$799.00
Wooden Camera D-Box Plus for Ursa Mini Pro 12K (V-Mount)
- Power Distribution & Breakout Box
- V-Mount Plate + Side Plate Design
- 4-Pin XLR Input for Hot-Swapping
- D-Tap, 2-Pin LEMO & Fischer Outputs
- 1 x LANC Input, Fischer Trigger Control
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,549.00
Wooden Camera V-Mount (Sony A9, A7RIII, Dummy NP-FZ100)
Utilizes an IDX V-Mount and Sony A9 / A7rIII connector with a regulator integrated in the plate that provides correct voltage
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$499.00
Wooden Camera Canon BP-955 Battery Slide Extension for RED KOMODO Camera
- Requires RED KOMODO Battery Slide
- Supports Canon BP-955 for Hot Swaps
- For Gold or V-Mount Battery Slide
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
Wooden Camera Universal Micro Battery Plate (V-Mount)
- Compact, Universal Battery Plate
- For Micro & Full-Size Batteries
- 2 x D-Tap Accessory Ports
- Digital Fuse with Reset Button
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$459.00
Wooden Camera D-Box Power Distribution Adapter Box for ARRI Alexa Mini (V-Mount)
- For Alexa Mini
- Custom version of D-box
- Power distribution
- Standardised remote start/stop
- Hot swap abilities
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,349.00
Wooden Camera D-Box (Sony Venice, V-Mount)
- For the Sony Venice camera
- Adds power distribution
- Standardized remote start/stop
- Hot swap abilities
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$3,899.00
Wooden Camera Pro Gold Mount Battery Plate
Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$409.00
Wooden Camera D-Box for Sony Venice (Gold Mount)
Highest quality Anton Bauer components are used in the Gold Mount assembly and the unibody power plate design is extremely durable and lightweight
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$3,899.00
Wooden Camera Pro V-Mount Camera Side to Gold Mount Battery Side Adapter
Features a rugged aluminum body for durability and secure battery mounting, with 3x D-taps for accessory power.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$649.00
Wooden Camera Pro Gold Mount Camera Side to V-Mount Battery Side Adapter
Features a rugged aluminum body for durability and secure battery mounting, with 3x D-taps for accessory power.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$649.00
Wooden Camera Pro V-Mount Battery Plate for Sony FS7, FS5, Panasonic EVA1 Cameras
For Sony FS7/FS5 & EX3, Panasonic EVA1, Uses Long-Lasting V-Mount Battery, 3 x D-Tap Accessory Ports (12-16V)
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$649.00
Wooden Camera Gold Mount for Blackmagic Pocket Cinema Camera 4K
Wooden Camera brand Gold Mount plate utilizing an Anton Bauer mount and Blackmagic Pocket Cinema Camera 4K connector.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$399.00
Wooden Camera WC Pro V-Mount for Canon C200, C200B, C300mkII
Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$789.00
Wooden Camera Micro Power Accessory Plate
- Three 3/8"-16 mounting points
- Four 1/4"-20 mounting points
- Attaching plate to articulating arms
- Includes twenty-two M2.5 threaded holes
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$94.95
Wooden Camera D-Box for Canon C300 Mark II (V-Mount)
- Power distribution
- Standardised remote start/stop
- Hot-swap abilities
- For Canon C300 Mark II
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,299.00
Wooden Camera Battery Belt Clip Mounting Plate
- Provides mounting points
- Stainless steel clip
- Attached to the back
- Can be used with gimbals
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$189.00
Wooden Camera Battery Swing
- Holds V-Mount or Gold Mount Plates
- Swings Away from the Camera
- Allows Rear Camera Access
- Modular Rod Clamp
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$689.00
Wooden Camera Low Mode V-Mount Adapter for RED DSMC2
- Lower position of brick battery
- Allows installation of taller batteries
- Utilises an IDK brand plate
- Provides two D-Taps
- Attaches without tools
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$499.00
Wooden Camera WC V-Mount Plate for Canon C200/C200B/C300 MkII
- 30.5 cm cable length
- Easy insertion into camera
- LEMO compatible
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$449.00
Wooden Camera Cable-Less Power Plate for RED Weapon/Scarlet-W/Raven (V-Mount, IDX)
- Utilises an IDK brand plate
- Attach without tools
- V-Mount
- Communicate percentage and voltage data
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,269.00
Wooden Camera V-Mount Plate for Blackmagic Cinema Camera
- Use Long-Lasting V-Mount Battery
- 2 x D-Tap Accessory Ports
- Works with Wooden Camera Battery Slides
- Ample 38 cm Cable Length
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$399.00
Wooden Camera Micro Battery Slide for Panasonic BGH1 (V-Mount)
- Supports V-Mount Battery
- Mounts Using 3/8"-16 Screw
- Power Camera with 3-Pin LEMO-Type Cable
- Can Hot Swap with Camera Battery
- Provides 12V Power to Camera
- 2 x 5.8A D-Tap Accessory Outputs
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$789.00
Wooden Camera Micro Battery Slide Pro (Micro V-Mount)
- Micro V-Mount Battery Plate
- One LEMO 3-Pin Output
- Two 5.8A D-Tap Ports
- Attaches via 15mm LW Rod Clamp
- Digital Fuse Prevents Overloading
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$789.00
Wooden Camera Battery Slide Pro for Canon C70 (V-Mount)
- Attaches to Any Canon Accessory Mount
- Supports 1 x V-Mount Battery
- Access to Camera Battery for Hot Swaps
- 3 x D-Tap Ports, Protective Digital Fuse
- Powers Camera with DC Barrel Cable
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$879.00
Wooden Camera Micro Battery Slide Pro for Panasonic BGH1 (V-Mount)
- Supports V-Mount Battery
- Mounts onto Optional 15mm LWS Rods
- Power Camera with 3-Pin LEMO-Type Cable
- Can Hot Swap with Camera Battery
- Provides 12V Power to Camera
- 2 x 5.8A D-Tap Accessory Outputs
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$789.00
Wooden Camera Offset Mount for Bolt 4K LT TX
- 1/4"-20 pass-through slot
- Features one 3/8"-16 and two 1/4"-20 mounting points
- Up to six mounting positions via a single 1/4"-20 screw
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Wooden Camera Battery Slide for C300 Mark III and C500 Mark II (V-Mount)
- V-Mount Battery Plate.
- Open Access to Camera's BP-U Battery.
- Provides Hot-Swap Support.
- 4-Pin XLR Power Cable.
- 3 x D-Tap Outputs.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$879.00
Wooden Camera Micro Battery Slide Pro for Blackmagic Pocket Cinema Camera 6K Pro (Gold Mount)
- Supports Gold Mount Battery
- Mounts onto Optional 15mm LWS Rods
- Power Camera with 2-Pin LEMO-Type Cable
- Can Hot Swap with Camera Battery
- Provides 14V Power to Camera
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$799.00
Wooden Camera Micro Battery Plate Adapter for RED V-RAPTOR (V-Mount to V-Mount)
- Adapts V-Mount V-RAPTOR to V-Mount
- For Micro & Full-Size Batteries
- 2 x D-Tap Output Ports
- 3.8A E-Fuse with Reset Button
- Camera Stays Running If Voltage Exceeded
- Durable Anodised Aluminium Build
Usually ships in 3 - 4 weeks
You Pay:
$729.00
Wooden Camera WC V-Mount Battery Plate for RED Epic/Scarlet Cameras
- Accepts V-Mount Batteries
- 20.32 cm RED Epic/Scarlet LEMO Connector Cable
- D-Tap Port for Accessory Power
Usually ships in 3 - 4 weeks
You Pay:
$599.00
Wooden Camera V-Mount for Blackmagic Pocket Cinema Camera 4K
Wooden Camera brand V-Mount plate utilizing an IDX V-Mount and Blackmagic Pocket Cinema Camera 4K connector.
Special Order
Usually ships in 3 - 4 weeks
You Pay:
$399.00
Wooden Camera V-Mount Plate for Sony FS700
- DC Connection to Camera
- Integrated Voltage Regulator
- 2 x D-Tap Accessory Ports
- Works with WC Battery Slides/Rod Clamps
- For Sony FS700
Usually ships in 3 - 4 weeks
You Pay:
$499.00
Wooden Camera Micro Battery Slide Plate with Dual 15mm Rod Clamp (V-Mount)
- V-Mount Battery Plate
- Plate Slides Up and Down
- Two D-Tap Ports, 9A Resettable Fuse
- 15mm Dual Rod Clamp
- Multiple 1/4"-20 and 3/8"-16 Threads
Usually ships in 3 - 4 weeks
You Pay:
$769.00
Wooden Camera 26V Gold Mount Plus Sharkfin Dual Battery Mount for ARRI ALEXA LF, 65, SXT
- Gold Mount Sharkfin Battery Plate
- Accepts Two 26V Block Batteries
- Direct Mount on ARRI ALEXA LF, 65, SXT
- 2 x 15V D-Tap Outputs
- 2-Pin Fischer DC Input
Usually ships in 3 - 4 weeks
You Pay:
$2,949.00
Wooden Camera Battery Slide Pro Gold Mount for Sony FX9
- Attaches to the Rear of the Camera
- Supports Gold Mount Battery
- Access to BP-U Battery Allows Hot Swaps
- 3 D-Tap Ports & Protective Digital Fuse
Usually ships in 3 - 4 weeks
You Pay:
$889.00
Wooden Camera 26V Gold Mount Plus Battery Mount for ARRI ALEXA LF, 65, SXT
- Gold Mount Battery Plate
- Accepts One 26V Block Battery
- Direct Mount on ARRI ALEXA LF, 65, SXT
- 2 x 15V D-Tap Outputs
- 2-Pin Fischer DC Input
Usually ships in 3 - 4 weeks
You Pay:
$1,939.00
Wooden Camera Pro Gold Mount Battery Plate for Sony FS7, FS5, Panasonic EVA1
For Sony FS7/FS5 & EX3, Panasonic EVA1, Uses Long-Lasting Gold Mount Battery, 3 x D-Tap Accessory Ports (12-16V)
Usually ships in 3 - 4 weeks
You Pay:
$649.00
Wooden Camera Gold Mount (Sony A9, A7rIII, Dummy NP-FZ100)
Utilizes an Anton Bauer Mount and Sony A9 / A7rIII connector with a regulator integrated in the plate provides correct voltage
Usually ships in 3 - 4 weeks
You Pay:
$499.00
Wooden Camera ARRI Alexa LF 24V Sharkfin Battery Bracket for Gold Mount Batteries
Allows for two standard voltage gold mount batteries to power the Alexa LF, which requires 24V
Usually ships in 3 - 4 weeks
You Pay:
$2,949.00
Wooden Camera ARRI Alexa LF 24V Sharkfin Battery Bracket for V-Mount Batteries
Allows for two standard voltage V-Mount batteries to power the Alexa LF, which requires 24V
Usually ships in 3 - 4 weeks
You Pay:
$2,949.00
Wooden Camera WC Pro V-Mount for Canon C100, C100mkII, C300, C500
Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws.
Usually ships in 3 - 4 weeks
You Pay:
$869.00
Wooden Camera WC Pro V-Mount (4pin XLR Right Angle)
Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws.
Usually ships in 3 - 4 weeks
You Pay:
$789.00
Wooden Camera Pro Gold Mount (4pin XLR Right Angle)
Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws.
Usually ships in 3 - 4 weeks
You Pay:
$789.00
Wooden Camera WC Pro V-Mount for Blackmagic URSA Mini, URSA Mini Pro, URSA
Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws.
Usually ships in 3 - 4 weeks
You Pay:
$649.00
Wooden Camera Pro Gold Mount for Blackmagic URSA Mini, URSA Mini Pro, URSA
Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws.
Usually ships in 3 - 4 weeks
You Pay:
$649.00
Wooden Camera Pro Gold Mount for Canon C200, C200B, C300mkII
Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws.
Usually ships in 3 - 4 weeks
You Pay:
$789.00
Wooden Camera ARRI ALEXA 65/SXT 24V Sharkfin Battery Bracket (V-Mount)
- For ARRI ALEXA 65 and SXT Cameras
- Fits 2 x V-Mount Batteries
- 4 x D-Tap Power Outputs
- Hot Swap Block/Onboard Batteries
Usually ships in 3 - 4 weeks
You Pay:
$2,949.00
Wooden Camera ARRI ALEXA 65/SXT 24V Sharkfin Battery Bracket (Gold Mount)
- For ARRI ALEXA 65 and SXT Cameras
- Fits 2 x Gold Mount Batteries
- 4 x D-Tap Power Outputs
- Hot Swap Block/Onboard Batteries
Usually ships in 3 - 4 weeks
You Pay:
$2,949.00
Wooden Camera D-Box for Sony Burano Camera (V-Mount)
- V-Mount Battery Distribution Box
- Fits between Battery and Camera Body
- D-Tap, 2- and 3-Pin LEMO-Type Outputs
- DC Input for Hot-Swap Capability
- Cable-Free, Toolless Installation
- Works with Expander Modules Like B-Box
Usually ships in 3 - 4 weeks
You Pay:
$1,719.00
Wooden Camera D-Box + B-Box System Bundle (V-Mount)
- V-Mount D-Box Power Distribution Unit
- B-Box Power Distribution Extension Unit
- Remote & Link Cables
- 2-Pin, 3-Pin, D-Tap & Remote Ports
Usually ships in 3 - 4 weeks
You Pay:
$2,499.00
Wooden Camera D-Box and B-Box System (V-Mount)
- D-Box V-Mount Distribution Box
- B-Box Control Extension Box
- Run/Stop, Timecode, Control, Genlock
- DC Input for Hot Swap Capability
- 12V 2-Pin, D-Tap, and 24V 3-Pin Ports
- Connects to EXT Port on Camera
Usually ships in 3 - 4 weeks
You Pay:
$2,449.00
Wooden Camera D-Box for RED KOMODO-X (V-Mount)
- V-Mount Battery Distribution Box
- Fits between Battery and Camera Body
- DC Input for Hot Swap Capability
- 12V 2-Pin, D-Tap, and 24V 3-Pin Ports
- Connects to EXT Port on Camera
- EXT Output for B-Box
Usually ships in 3 - 4 weeks
You Pay:
$1,759.00
Wooden Camera D-Box for Blackmagic Design URSA Mini/Mini Pro (V-Mount)
V-Mount On-Camera Power Distribution, 3 x D-Tap Ports
Usually ships in 3 - 4 weeks
You Pay:
$1,959.00
Wooden Camera D-Box V-Mount Base Unit for Power Distribution
- Add up to 6 Optional Power Outputs
- Maximum Draw of 10A
- Power passed through D-Box
Usually ships in 3 - 4 weeks
You Pay:
$599.00
Wooden Camera D-Box Power Distribution Base Unit
- Create custom power-output D-Box
- Five simultaneous outputs
- Max. draw of 10A
Usually ships in 3 - 4 weeks
You Pay:
$419.00
Wooden Camera D-Box 2-Pin LEMO-Compatible Kit with D-Tap Power Adapter Cable
- Power Distribution Box
- Fits Between V-Mount & Gold Mount Plates
- 2 x 2-Pin LEMO-Compatible Outputs
- 2 x D-Tap Outputs
- 5V USB Output
Usually ships in 3 - 4 weeks
You Pay:
$889.00
Wooden Camera Battery Mount Plate for AJA Converter Box
- For AJA Converter box
- Provides mounting points for battery plates
- Hook and loop included
Usually ships in 3 - 4 weeks
You Pay:
$169.00
Wooden Camera AJA CION Pro Accessory Kit with V-Mount Battery Plate
- Designed for the AJA CION Camera
- Provides Camera and Accessory Support
- Top-Mounted Cheese Plate
- Quick-Release 15mm Rod Baseplate
- NATO Top Handle
Usually ships in 3 - 4 weeks
You Pay:
$4,499.00
Wooden Camera V-Mount Battery Plate for AJA CION Camera
- For AJA CION Camera
- IDX V-Mount
- AJA CION Molex connector
- 2 x D-Tap ports
Usually ships in 3 - 4 weeks
You Pay:
$319.00
Wooden Camera V-Mount Plate for Panasonic DMC-GH3/GH4
- Battery Dummy Connection to Camera
- Uses Long-Lasting V-Mount Battery
- Integrated Voltage Regulator
- 2 x D-Tap Accessory Ports
- Works with WC Battery Slide/Rod Clamps
Usually ships in 3 - 4 weeks
You Pay:
$499.00
Wooden Camera V-Mount Plate for Panasonic DMC-GH2
- Battery Dummy Connection to Camera
- Uses Long-Lasting V-Mount Battery
- Integrated Voltage Regulator
- 2 x D-Tap Accessory Ports
- Works with WC Battery Slide/Rod Clamps
Usually ships in 3 - 4 weeks
You Pay:
$499.00
Wooden Camera D-Box for Canon C700 (V-Mount)
- Power distribution
- Standardised remote start/stop
- Hot-swap capability
- For Canon C700
- Attaches to back of the camera
Usually ships in 3 - 4 weeks
You Pay:
$1,959.00
Wooden Camera Preston MDR4 Mounting Plate
- Ultra-light
- For Preston MDR4 control unit
- M3 hole pattern on the back
Usually ships in 3 - 4 weeks
You Pay:
$179.00
Wooden Camera D-Box for RED DSMC2 Cameras (Power Distribution Portion Only)
- Power Distribution Box
- Use with Cable-Free Battery Mount
- Fits between Battery Mount Sections
- 2 x Each D-Tap, LEMO, & Fischer Ports
- 1 x 5V, 2A USB Port
Usually ships in 3 - 4 weeks
You Pay:
$1,369.00
Wooden Camera D-Box for RED DSMC2 Cameras (V-Lock)
- V-Lock Battery Distribution Box
- Fits between Battery & Camera Body
- 2 x Each D-Tap, LEMO, & Fischer Ports
- 1 x 5V, 2A USB Port
- Tool-Less Installation
Usually ships in 3 - 4 weeks
You Pay:
$2,549.00
Wooden Camera V-Mount Plate for Canon 550D/600D/650D/700D
- Battery Dummy Connection to Camera
- Integrated Voltage Regulator
- 2 x D-Tap Accessory Ports
- Works with WC Battery Slide & Rod Clamp
Usually ships in 3 - 4 weeks
You Pay:
$499.00
Wooden Camera V-Mount Plate for Select Nikon Cameras with D5300 DC Connector
- Battery Dummy Connection to Camera
- Uses Long-Lasting V-Mount Battery
- Integrated Voltage Regulator
- 2 x D-Tap Accessory Ports
- Works with WC Battery Slides/Rod Clamps
Usually ships in 3 - 4 weeks
You Pay:
$509.00
Wooden Camera V-Mount Plate with XLR Connector
- XLR Connection to Camera
- Integrated Voltage Regulator
- 2 P-Tap Accessory Ports
- Works with Wooden Camera Battery Slide
Usually ships in 3 - 4 weeks
You Pay:
$499.00
Wooden Camera V-Mount Plate for Select Nikon Cameras with D800 DC Connector
- Battery Dummy Connection to Camera
- Uses Long-Lasting V-Mount Battery
- Integrated Voltage Regulator
- 2 x D-Tap Accessory Ports
- Works with WC Battery Slides/Rod Clamps
Usually ships in 3 - 4 weeks
You Pay:
$499.00
Wooden Camera V-Mount Plate for Canon C100/C100 MkII/C300/C500
- DC Connection to Camera
- Integrated Voltage Regulator
- 2 x D-Tap Accessory Ports
- Integrated 40 cm Cable
- Works with WC Battery Slides/Rod Clamps
Usually ships in 3 - 4 weeks
You Pay:
$589.00
Wooden Camera Anton Bauer Gold Mount Battery Plate for RED Epic/Scarlet Cameras
- Accepts Anton Bauer Gold Mount Batteries
- 8" RED Epic/Scarlet LEMO Connector Cable
- D-Tap Port for Accessory Power
Usually ships in 3 - 4 weeks
You Pay:
$599.00
Wooden Camera D-Box Plus for Ursa Mini Pro 12K (Gold Mount)
- Power Distribution & Breakout Box
- Gold Mount Plate + Side Plate Design
- 4-Pin XLR Input for Hot-Swapping
- D-Tap, 2-Pin LEMO & Fischer Outputs
- 1 x LANC Input, Fischer Trigger Control
Usually ships in 3 - 4 weeks
You Pay:
$2,549.00
Wooden Camera Gold Mount for RED One
Utilizes authentic Anton Bauer plate and RED ONE LEMO compatible connector.
Usually ships in 3 - 4 weeks
You Pay:
$599.00
Wooden Camera Cable-less Gold Mount for RED DSMC2
2x D-Tap ports for accessory power
Usually ships in 3 - 4 weeks
You Pay:
$1,269.00
Wooden Camera Gimbal Handle Bar Bracket (Gold Mount)
The WC Super Clamp's rubberized jaws clamp extremely tight with no slippage. Plate provides unregulated 12V power through 2x D-Taps on plate.
Usually ships in 3 - 4 weeks
You Pay:
$589.00
Wooden Camera D-Box for RED DSMC2 (Gold Mount)
Gold Mount Battery Distribution Box, Fits between Battery & Camera Body, 2 x Each D-Tap, LEMO, & Fischer Ports, 1 x 5V, 2A USB Port
Usually ships in 3 - 4 weeks
You Pay:
$2,549.00
Wooden Camera Gold-Mount Plate for Blackmagic Pocket Camera
- Use Long-Lasting Gold Mount Battery
- 1 x D-Tap Accessory Port
- Works with Wooden Camera Battery Slides
- Ample 38 cm Cable Length
Usually ships in 3 - 4 weeks
You Pay:
$399.00
Wooden Camera V-Mount Plate for Blackmagic Pocket Camera
- Use Long-Lasting V-Mount Battery
- 2 x D-Tap Accessory Ports
- Works with Wooden Camera Battery Slides
- Ample 38 cm Cable Length
Usually ships in 3 - 4 weeks
You Pay:
$399.00