Batteries & Power
Teradek 2-Pin LEMO to P-Tap Cable (11")
Power Cable for Cube, Bolt, Bond, Link
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$221.00
Teradek Tomahawk2 Transmitter/Receiver Battery Plate for B Series
- Accepts Sony B Series Batteries
- LEMO-Type Cable Termination
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$295.00
Teradek L-Bracket Battery Plate for Sony L-Series or Canon LP-E6 Battery
- For Sony L-Series or Canon LP-E6 Battery
- Integrated LEMO-Type Cable
- Powers Unit Using Camera Battery
- For All Bolt Transmitters & Receivers
- For ServPro Wi-Fi Video Transmitter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$316.00
Teradek Dual Battery V-Mount Plate for Cube 605/655
Available to order today
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$691.00
Teradek Dual 14.4V V-Mount Battery Plate for Bolt Pro 300/500/1000/2000/3000 Receivers
- Surrounds Bolt Pro Receiver Chassis
- Mounts Bolt Pro to Monitor Battery Plate
- D-Tap Output
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$791.00
Wooden Camera D-Tap Power Cable for RED Epic/Scarlet (15")
- D-Tap (P-Tap) Connector
- Right Angle DC Plug
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$279.00
Wooden Camera V-Mount Plate for Blackmagic Cinema Camera
- Use Long-Lasting V-Mount Battery
- 2 x D-Tap Accessory Ports
- Works with Wooden Camera Battery Slides
- Ample 38 cm Cable Length
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$399.00
Wooden Camera 4-Way D-Tap Splitter Cable
- Splits 1 D-Tap into 4
- 10 Amp Maximum Load
- Unregulated Voltage
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$129.00
Wooden Camera WC V-Mount Battery Plate (Dual D-Tap)
- IDX V-Mount
- 12V power
- D-Tap connectors
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$279.00
Wooden Camera V-Mount Battery Plate for Sony FS7, FS5, Panasonic EVA1 Cameras
- IDX-V-Mount battery plate
- DC connector
- Two D-Tap connectors
- Minimal cable excess
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$399.00
Wooden Camera D-Box 2-Pin LEMO-Compatible Kit V-Mount
- V-Mount Battery Distribution Box
- Fits Between Battery & Camera Mount
- 2x 2-Pin LEMO-Compatbile Outputs
- 2x D-Tap Outputs
- 5V USB Output
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,089.00
Wooden Camera D-Tap to ALEXA Mini Braided Flex Cable
- Power ALEXA Mini from D-Tap Power Source
- Use with V-Mount & Gold Mount Batteries
- Flexible Design
- Insulated Wires in Braided Nylon Sheath
- Right-Angle LEMO-Type Connector
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$349.00
Wooden Camera D-Tap to Epic/Scarlet/Dragon/Weapon Braided Flexible Cable (36" / 91cm)
- Great for gimbal use
- For select RED cameras
- Power camera using V or gold-mount battery
- Cable length of 91 cm
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$319.00
Wooden Camera D-Tap Power Cable for Canon C200/C200B/C300mkII (24" / 61cm)
- Power camera using any V or Gold-mount battery
- With a D-tap plug
- For Select Canon cameras
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$259.00
Wooden Camera 3-Pin XLR Extension Cable (10')
- Use with ARRI Cameras and Batteries
- Male to Female 3-Pin XLR Cable
- 3 m extension cable
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$139.00
Wooden Camera 4-Pin XLR Extension Cable (10')
- Use with 4-pin XLR Camera Adapter Cables
- Male to Female 4-Pin XLR Cable
- Cable length of 3 m
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$139.00
Wooden Camera WC V-Mount Plate for Canon C200/C200B/C300 MkII
- 30.5 cm cable length
- Easy insertion into camera
- LEMO compatible
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$459.00
Wooden Camera D-Box for Canon C300 Mark II (V-Mount)
- Power distribution
- Standardised remote start/stop
- Hot-swap abilities
- For Canon C300 Mark II
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,299.00
Wooden Camera Battery Belt Clip Mounting Plate
- Provides mounting points
- Stainless steel clip
- Attached to the back
- Can be used with gimbals
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$199.00
Wooden Camera Cable-Less Power Plate for RED Weapon/Scarlet-W/Raven (V-Mount, IDX)
- Utilises an IDK brand plate
- Attach without tools
- V-Mount
- Communicate percentage and voltage data
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,269.00
Wooden Camera Low Mode V-Mount Adapter for RED DSMC2
- Lower position of brick battery
- Allows installation of taller batteries
- Utilises an IDK brand plate
- Provides two D-Taps
- Attaches without tools
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$499.00
Wooden Camera Battery Swing
- Holds V-Mount or Gold Mount Plates
- Swings Away from the Camera
- Allows Rear Camera Access
- Modular Rod Clamp
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$689.00
Wooden Camera D-Tap to Canon 5DmkIV, 5DmkIII, 5DmkII, 6D, 7D, 7DmkII, and BMMCC Power Input (20")
- Cable regulates power from D-Tap
- Cable length of 508 mm
- Power camera using any V or Gold mount battery
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$249.00
Wooden Camera D-Tap to Panasonic GH5, GH4, and GH3 Power Input (20")
- 406 mm cable length
- D-Tap plug
- Cable regulates power
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$249.00
Wooden Camera D-Box (Sony Venice, V-Mount)
- For the Sony Venice camera
- Adds power distribution
- Standardized remote start/stop
- Hot swap abilities
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$3,899.00
Wooden Camera 1 to 3 Mini Power Splitter (2-Pin LEMO)
Splits one male 2pin, 0B LEMO to three female 2pin LEMOs
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$399.00
Wooden Camera D-Tap To Fujifilm X-H1, X-T2
Allows you to power the camera using any V-Mount or Gold Mount battery with a D-Tap plug
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$259.00
Wooden Camera - D-Tap To Sony A9, A7RIII (Dummy NP-FZ100)
Powers the Sony A9 or A7rIII camera using any V-Mount or Gold Mount battery with a D-Tap plug
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$259.00
Wooden Camera V-Mount (Sony A9, A7RIII, Dummy NP-FZ100)
Utilizes an IDX V-Mount and Sony A9 / A7rIII connector with a regulator integrated in the plate that provides correct voltage
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$499.00
Wooden Camera Battery Slide Pro V-Mount for Sony FX9
- Attaches to the Rear of the Camera.
- Supports V-Mount Battery.
- Access to BP-U Battery Allows Hot Swaps.
- 3 D-Tap Ports & Protective Digital Fuse.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$879.00
Wooden Camera D-Tap Power Cable for Sony FX9
- Regulated Power Cable
- Converts Voltage for Use with FX9
- 20" Long
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$309.00
Wooden Camera Battery Slide for RED KOMODO Camera (Gold Mount)
- Accepts Gold Mount Batteries
- For RED KOMODO Camera
- D-Tap Accessory Port
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$899.00
Wooden Camera Canon BP-955 Battery Slide Extension for RED KOMODO Camera
- Requires RED KOMODO Battery Slide
- Supports Canon BP-955 for Hot Swaps
- For Gold or V-Mount Battery Slide
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
Wooden Camera Battery Slide for C300 Mark III and C500 Mark II (V-Mount)
- V-Mount Battery Plate.
- Open Access to Camera's BP-U Battery.
- Provides Hot-Swap Support.
- 4-Pin XLR Power Cable.
- 3 x D-Tap Outputs.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$879.00
Wooden Camera Battery Slide Pro for Sony FX6 (V-Mount)
- Attaches to Rear of FX6 Camera
- Supports V-Mount Battery
- Access to BP-U Battery Allows Hot Swaps
- 3 x D-Tap Ports, Protective Digital Fuse
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$879.00
SmallRig DC5521 to NP-FW50 Dummy Battery Charging Cable
- Connects to SmallRig NP-F Battery Plate
- 5.5/2.1mm DC Connector to FW50 Dummy Battery
- For Sony A5/A6/A7 Series Mirrorless Cameras
- 60cm-Long Cable
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$35.95
SmallRig Mini V-Lock Battery Plate
- Mount V-Mount Battery on a Rig
- Lightweight V-Lock Plate
- 1/4"-20 & M4 Mounting Threads
- Durable Aluminium Construction
On Backorder
You Pay:
$42.95
SmallRig Mini V-Lock Battery Plate with Belt Clip
- Mount V-Mount Battery on a Belt/Strap
- Lightweight V-Lock Plate
- Clip Features Anti-Slip Design
- 1/4"-20 & M4 Mounting Threads
- Aluminium & Stainless Steel Construction
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$48.95
Tether Tools ONsite Relay C Camera Power System
- Continuously power your camera with USB-C battery packs or AC wall power
- No need to purchase multiple camera batteries
- Run two batteries simultaneously for longer runtime and no downtime
- Can be adapted for use with D-Tap batteries
- Easy mounting options with integrated silicon strap and 1/4"-20 mount
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$249.00
SmallRig 3168B NP-F Battery Adapter Mount Plate (Advanced Edition)
- Fully compatible with NP-F batteries
- Aluminium alloy/ gold-plated electrical contacts
- Allows to access two devices
- Supports bi-directional input and output
- Comes with USB-C mode
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$99.95
SmallRig 3203B V-Mount Battery Adapter Plate with Dual 15mm Rod Clamp
- Power Your Gear with a V-Mount Battery
- 14.8 D-Tap & 5V/2A USB Outputs
- 1 x 8 VDC & 2 x 12 VDC Barrel Outputs
- 15mm LWS Rod Clamp on Bottom
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$209.00
SmallHD D-Tap to 2-Pin Power Cable (0.9m)
- Power Cable Measures 0.9m in Length
- D-Tap Connector on One End
- Straight 2-Pin LEMO-Type Connector
- Can Be Used to Output Power from Cine 13
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$219.00
SmallHD 2-Pin LEMO to US Wall Outlet Power Supply (12V, 4.5A)
- For 2-Pin LEMO SmallHD Monitors
- For SmallHD 503U, 703U, 703 Monitors
- Connects to a Wall Outlet for Power
- Power Adapter with 2-Pin LEMO Connector
- 2-Prong Power Cord
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
SmallHD Power Supply for Cine 13 Monitor
- AC Power for Cine 13" 4K Monitor
- 4-Pin XLR Cable Connector
- Power Cable with Adapter
- Provides 24 V, 6.25A Power to Monitor
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$309.00
SmallHD 2-Pin to 2-Pin Power Cable (90cm)
- 2-Pin to 2-Pin LEMO-Type Connectors
- Power Devices from 2-Pin Connector
- Cable Measures 90cm in Length
- Power Accessories from Pro Monitor
- ARRI-Standard Wiring Configuration
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$219.00
SmallHD Power Supply for 4K Monitor Series
- AC Adapter for Select 4K Series Monitors
- 3-Pin XLR Connector
- Provides 24V, 10.4A Power to Monitor
- Adapter and Cable Set
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
SmallHD AB-Mount Bracket For Production Monitors
- For 1300, 1700, and 2400 Series Monitors
- Includes D-Tap to 4-Pin XLR Cable
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$349.00
SmallHD ARRI Alexa Right Angle Control Cable (1m)
- Ethernet to 10-pin LEMO Right Angle Connector
- Cable for ARRI Alexa Cinema Cameras
- 1m length
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$189.00
SmallHD Backplate For 702 Touch And Cine 7
- Replaces External Battery Plate
- Covers Mainboard Electronic Pins
- For Use when Only Powering via Connector
- Aids in Passive Cooling of Monitor
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$94.95
SmallHD 14V/26V Dual Battery Bracket (V-Mount)
- Mounts on Back of 4K Monitor
- Direct Plug-In Design, No Cable Required
- Powers Monitor with 1 x or 2 x Batteries
- For 14V or 26V Batteries
- Enables Hot-Swapping
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$726.00