Camera Rigs & Support

• Motorised Camera Platform
• Keyframing for Complex Tracking Shots
• Reduced Friction on Rope Drive
• Integrates with Genie II Pan/Tilt Head
• Compatible with Third-Party Sliders

• Infinitely Extendable
• Extreme Portability + Lightweight
• Motion Control Ready
• Vertical Operation
• Seamlessly Join

• Wireless Programmable Motorised Slider.
• Robust 1.19m Portable Travel Slider.
• Carbon Fiber Rails.
• Supports up to 5kg.

Dual-Length Slider with Movable Rails, 1.3' with 15 lb Payload Tripod Mounted, 0.7' with 50 lb Payload Surface Mounted, Lockable Fold-Out Legs

• Formfitting, Modular Full Cage
• 15mm LWS Baseplate, 2 x 12" 15mm Rods
• Run/Stop & Quick Release Top Handles
• SSD Holder for Samsung T5
• Accessory Mount for 6K Pro Battery Grip
• 90° USB-C Cable

• For AS14 and BV10 Tripods
• Locking 12.7cm Diameter Wheels
• Compatible with Twin-Spiked Tripod Feet
• 110cm Diameter When Extended
• 60cm Folded Length
• Includes SuperUser Group Membership

• Add Handgrips to Your Rig
• Left and Right Rosette Rubber Handgrips
• Left and Right Rosette Extension Arms
• 15mm Rod Block with Dual Rosettes

• Accepts V-Mount Batteries
• For RED KOMODO Camera
• D-Tap Accessory Port

• Short Track for Magic Carpet System
• Lightweight Carbon Fiber Construction
• Use with Carriage & End Caps
• Supports Loads up to 5 kg
• Brake and Bubble Level on Carriage

• Supports V-Mount Battery
• Mounts onto Optional 15mm LWS Rods
• Power Camera with 2-Pin LEMO-Type Cable
• Can Hot Swap with Camera Battery
• Provides 14V Power to Camera

• For RED KOMODO Camera
• Onboard Monitor Hinge
• Arca-Swiss Style Top Handle
• Arca-Swiss Style Top Plate
• Arca-Swiss Style Top Mount

• Supports Gold Mount Battery
• Mounts onto Optional 15mm LWS Rods
• Power Camera with 2-Pin LEMO-Type Cable
• Can Hot Swap with Camera Battery
• Provides 14V Power to Camera

• Formfitting Cage with Side Rosettes
• Top Handle with Start/Stop Control
• Universal Quick Release 501 Baseplate
• 2 x 12" Long 15mm Rods
• Modular Cage Design
• Top NATO & Left/Right NATO Safety Rails

• Formfitting Cage with Side Rosettes
• Top Handle with Start/Stop Control
• Universal Quick Release 501 Baseplate
• 2 x 12" Long 15mm Rods
• Modular Cage Design
• Top NATO & Left/Right NATO Safety Rails

• Add Handgrips to Your Rig
• Left and Right Rosette Rubber Handgrips
• Left and Right Rosette Extension Arms
• 15mm Rod Block with Dual Rosettes

• Formfitting Cine-Style Cage
• Top Handle with Run/Stop Trigger
• Sensor Plane Marker, 3 NATO Rails
• Reversible, Modular Handle Design

• Formfitting Cine-Style Cage
• Top Handle with Run/Stop Trigger
• Sensor Plane Marker, 3 NATO Rails
• Reversible, Modular Handle Design

• Supports Power Plate & On Board Recorder
• Multiple Hole Patterns
• Includes L-Bracket
• Dual Rosette Mounts

• Mounts & Adjusts Viewfinder On Rig
• Viewfinder Mounting Bracket Included
• Adapter for Alphatron & SmallHD Included
• 4" NATO Rail w/ Standard-Size Dimensions
• Safety Pin Prevents Accidental Removal

• ARRI Standard Mounting Plate
• Safety Catches on Each End
• Fits OConnor 2060, 2575, 120EX
• Fits Sachtler Cine 30
• Attaches to Most Tripods Head via Screws

• Modular 8" Top Handle for Camera Rig
• Front and Rear Connectors
• 5" Extension and 1" Extension
• Allen Wrench

• Dedicated Full Camera Cage
• Universal ARRI/501 Baseplate System
• NATO-Mount Top Handle, T5 SSD Holder
• Mini Quick Release, 2 x 8" 15mm Rods
• USB Type-C Cable

• For RED V-RAPTOR
• Multiple 1/4"-20 & 3/8"-16 Threads
• Four NATO Rails, Single Rod Clamp
• ARRI Rosette Compatibility
• Ergonomic Top Handle
• Modular Design for Flexible Installation

• For RED V-RAPTOR
• Multiple 1/4"-20 & 3/8"-16 Threads
• Four NATO Rails, Single Rod Clamp
• ARRI Rosette Compatibility
• Ergonomic Top Handle
• Modular Design for Flexible Installation

• Ultra-lightweigh textension for the EVF mount
• Extends from 26 cm to 37 cm
• Friction knuckle allows for quick tilting
• Tool-less design

• Replaces original viewfinder mount system
• Three points of adjustment
• Tool-less design
• NATO arm length of approx. 12.7 cm

• Ultra-lightweight extension
• For AIR EVF Mount
• Extends from 26 to 37 cm
• Allows quick tilting
• Tool-less design

• For Large DSLR Camera Bodies
• Leaves Camera Grip Open
• Manfrotto Standard Quick Release
• Built-In HDMI Cable Clamp
• Lens Adapter Support

• Holds 50' of K-Flex Track
• Cordura Exterior
• Side Grab Handles

• Modular Camera Cage for URSA Mini
• Remote Trigger on Top Handle
• Multiple 1/4"-20 and 3/8"-16 Threads
• LANC Control Port, Shoe Mounts
• Multiple NATO Rails, Side Rosette

• Formfitting Cage for KOMODO & KOMODO-X
• Top Handle with Run/Stop Trigger
• 1 x 15mm Rod Clamp, 3 x NATO Rails
• 2 x ARRI-Style Rosettes, 2 x Shoe Mounts

• Formfitting Cage for KOMODO & KOMODO-X
• Top Handle with Run/Stop Trigger
• 1 x 15mm Rod Clamp, 3 x NATO Rails
• 2 x ARRI-Style Rosettes, 2 x Shoe Mounts

• Modular Camera Cage Top Plates
• Trigger Top Handle
• Side Rod Clamp with NATO Rail
• Numerous Mounting Threads and Shoe Mount

• Relocate & Extend Sony FX6 Handgrip
• Mounts Using ARRI-Standard Rosette
• Telescoping Extension & 360°: Rotation
• Push-Button Angle Adjustment
• Arm Extends 5.6" Folded to 11" Maximum

• 0.76m Quiet Motorised Sliding Range.
• Supports Cameras up to 5kg.
• Programmable Shooting Modes.
• Straight, Parallax, or 120° Panning.

• Ultra-Compact 360° Motorised Pan System
• Remote Controllable via iOS/Android App
• Desktop Mount or Attach to Other Gear
• Motion-Controlled Panning Shots

• Wireless Programmable Motorised Slider.
• Robust 120cm Portable Travel Slider.
• Carbon Fibre Rails.
• Supports up to 1.13kg

• Supports Handheld Shooting
• Top Plate 1958 Connects Tightly
• Shoulder Plate Enables 85mm Rod Height
• Left Side Wooden Grip 1891

• For Sony F5/F55
• Three points of adjustment
• Tool-less design
• Quick installation

• Built-In Bluetooth & WiFi
• Aluminium & Oak handle
• 3 Customised Band Switches
• Focus Wheel, Record Switch
• Nine-Way Joystick

• Wireless Bluetooth Controller
• Programmable Motorised Slider
• Robust 81.2cm Portable Carbon Fiber Rails
• Supports up to 2.49kg

• Composed of 2 Handles
• Individual Rotation Angle - 360°
• Composite Camera Support via Rod Block
• Anodised Aluminium Rod Block
• Supports 15 mm Rods

• Left handgrip with ARRI rosettes and black Push-button
• Arm features 3 points of articulation
• Patented Push-button technology
• Push, adjust, release, and then its lock
• Ergonomic handle with rubber handgrips for stability and precision
• Stainless steel locking mechanism for durability
• Designed with (2) ¼-20 and (2) 3/8-16 threaded holes with locking attachment stoppers
• Made of CNC machined aluminum for resistance

• Adjustable Mounting Arm for FS7 Monitor
• Four Points of Adjustment
• Three Red Tension Levers
• Rosette Mount for Monitor Attachment
• FS7 Rod Lock for Mounting on Camera

• High-Strength Alloy Construction
• Extends Magic Carpet PRO Sliders
• Adjustable Release System
• Counterbalance Compatibility
• Made from reinforced Aluminium

• For 15mm LWS & 15mm Studio Rods
• Locks via Built-In Tightening Screw
• Snap-On Design
• Fast & Simple Setup
• Stable, Solid & Durable