Computer Hardware
Blackmagic Design DeckLink Quad HDMI Recorder Capture Card
Record up to DCI 4K60 HDMI Video, 4 x HDMI Inputs, PCIe Interface, Up to 4K30 12-Bit 4:2:2 in All Modes, Switchable-Mode HDMI Inputs
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$945.00
Blackmagic Design DeckLink Mini Recorder 4K
- SD/HD/3G/6G-SDI Input
- HDMI Input
- PCI-Express 2.0 x4 Interface
- DCI 4K, UHD, HD, and SD Video Support
- 10-Bit Processing
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$360.00
Blackmagic Design Adapter - 6G BD SFP Optical Module
A spare host adaptor for Multibridge Pro and Extreme
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$409.00
Blackmagic Design DeckLink Mini Monitor 4K
- SD/HD/3G/6G-SDI Output
- HDMI Output
- PCI-Express 2.0 x4 Interface
- DCI 4K, UHD, HD, and SD Video Support
- 10-Bit Processing
In stock
Ships Friday
You Pay:
$369.00
Blackmagic Design DeckLink Duo 2
- SD/HD/3G-SDI Input/Output
- PCI-E Interface
- 1080p 4:4:4 by Single-Link 3G-SDI
- 10/12-Bit Processing
- Down/Up/Cross Conversions
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$899.00
StarTech 3 Port 2b 1a 1394 PCI Express FireWire Card Adapter
- Installed in a PCI Express slot
- Two IEEE1394b (FireWire 800 - 9 pin) ports
- One IEEE1394a (FireWire 400 - 6 pin) port
- Native (single chip) PCI Express chipset
In stock
Ships direct Friday
You Pay:
$179.00
StarTech 2-Port RS-232 Serial PCIe Adapter Card with 16550 UART (Green)
- Adds 2 x High-Speed RS-232 Serial Ports
- Native Single Chip Design
- PCIe Bus Type
- Serial Interface
- 460.8 kb/s Maximum Baud Rate
In stock
Ships direct Friday
You Pay:
$119.00
StarTech 2 Port PCI Low Profile RS232 Serial Adapter Card with 16550 UART
- Supports the RS-232 serial interface
- 16 byte FIFO buffer
- Fast data transfer while multitasking
- IRQ sharing saves resources and eliminates conflicts
In stock
Ships direct Friday
You Pay:
$94.95
Blackmagic Design DeckLink Duo 2 Mini
- 3G/HD/SD-SDI Input/Output
- PCIe Interface Card
- Up to 1080p30 10-Bit 4:2:2 in All Modes
- 1080p30 12-Bit 4:4:4 RGB on Playback
- Rec. 601 and Rec. 709 Colour Space
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$852.00
Blackmagic Design Decklink Quad 3G-SDI Mezzanine Card for Decklink 4K Extreme 12G
- For Decklink 4K Extreme 12G Main Board
- 2 x 3G-SDI Inputs, 2 x 3G-SDI Output
- Replacement for Original Daughter Card
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$159.00
Blackmagic Design DeckLink Micro Recorder
1-Lane PCIe Slot Capture Card, SDI and HDMI Inputs
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$279.00
Blackmagic Design Power Supply - UltraStudio 12V30W
Power Supply - UltraStudio 12V30W
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$169.00
AJA openGear 2-Channel Multi-Mode LC Fiber to 3G-SDI Receiver with Dashboard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Inputs: 2x Multi-Mode LC Fiber.
- Outputs: 2x 3G-SDI BNC.
- Monitor via openGear DashBoard.
- Input Present and Input SMPTE Lock LEDs.
- Automatic detection and reclocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- Nominal Wavelength: 850 nm.
- Power: 2.5 watts.
- Hot swap capable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$2,495.00
Blackmagic Design Fan for Universal Videohub 72
- Replacement fan
- For Universal Videohub 72
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$119.00
Blackmagic Design Fan for Universal Videohub 288
- Replacement fan
- For Universal Videohub 288
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$139.00
Blackmagic Design Decklink HDMI 2.0 & Optical Fiber Mezzanine Card for Decklink 4K Extreme 12G
- For Decklink 4K Extreme 12G Main Board
- 1x HDMI 2.0 Input, 1 x HDMI 2.0 Output
- 2 x Optical Fibre In / Out
- Replacement for Original Daughter Card
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$209.00
Magewell Pro Capture HDMI Card (1-Channel)
- 225 MHz HDMI receiver
- Supports customised EDID
- 12-bit ADC
- Supports full 10-bit video processing
- Latency of 64 video lines
Usually ships in 4 - 6 weeks
You Pay:
$723.00
AJA U-TAP SDI to USB 3.0 Powered Capture Device
- USB 3.0 host interface, HD-SDI input, and SDI out (looping output)
- Provides a quick and easy way to obtain SDI sources for capture
- Bus-powered and supports frame rates up to 1080p60
Usually ships in 3 - 4 weeks
You Pay:
$985.00
AJA DIN 1.0/2.3 Pigtails For Kona 4, Corvid 44, Corvid 88, HDR Image Analyzer (Pack of 5)
- Pack of 5 DIN 1.0/2.3 Pigtails for KONA 4, Corvid 44, Corvid 88 and HDR Image Analyzer
Usually ships in 3 - 4 weeks
You Pay:
$350.00
AJA openGear 1-Channel 3G-SDI to Single Mode LC Fiber Transmitter with DashBoard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Inputs: 1x 3G-SDI with SDI Loop out.
- Outputs: 1x 3G-SDI BNC; 1x Single Mode LC Fiber.
- Monitor via openGear DashBoard.
- Input Present and Input SMPTE Lock LEDs.
- Automatic detection and reclocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- Nominal Wavelength: 1310 nm.
- Power: 2.5 watts.
- Hot swap capable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,255.00
AJA openGear 1-Channel Single Mode LC Fiber to 3G-SDI Receiver with DashBoard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Input: 1x Single Mode LC Fiber.
- Outputs: 2x 3G-SDI BNC (Mirrored).
- Monitor via openGear DashBoard.
- Input Present and Input SMPTE Lock LEDs.
- Automatic detection and reclocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- Nominal Wavelength: 1260-1620 nm.
- Power: 2.5 watts.
- Hot swap capable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,255.00
AJA KONA LHe Plus HD-SDI / Analog Video Capture & Playback PCIe Card
- Mac & Windows Compatibility
- 10-Bit Uncompressed Editing Solution
- HD/SD-SDI Input & Dual SDI Outputs
- HD/SD Analogue Video I/O
- Analogue & Digital Audio I/O
Usually ships in 3 - 4 weeks
You Pay:
$2,965.00
Magewell USB Capture HDMI 4K Plus
- Capture up to DCI 4K to Your Computer
- Capture from Cameras/Game Consoles/Etc.
- Supports RGB 4:4:4, YCbCr 4:4:4 & 4:2:2
- HDMI Input & Loop-Through
- 3.5mm Audio I/O (Capture/Extract)
Usually ships in 4 - 6 weeks
You Pay:
$1,279.00
Magewell Ultra Stream HDMI
Single-Channel HD Streaming Encoder, Accepts HDMI Video Sources up to DCI 4K, HDMI Loop Output, Stream up to 1080p Resolution in MP4
Usually ships in 4 - 6 weeks
You Pay:
$1,146.00
AJA Io 4K Plus Professional Video I/O for Thunderbolt 3
12-bit 4K/UltraHD/HD I/O via Thunderbolt 3, with 12G-SDI and HDMI 2.0
Usually ships in 3 - 4 weeks
You Pay:
$7,415.00
AJA FIBERLC-1-TX Single LC 3G Fiber Transmitter
- Single LC fibre TX SFP for AJA rackmount converters
Usually ships in 3 - 4 weeks
You Pay:
$575.00
AJA Single LC 3G Fiber Receiver
- Single LC fibre RX SFP for AJA rackmount converters
Usually ships in 3 - 4 weeks
You Pay:
$575.00
AJA FIBERSC-1-TX Single SC 3G Fiber Transmitter
- Single SC fibre TX SFP for AJA rackmount converters
Usually ships in 3 - 4 weeks
You Pay:
$575.00
AJA FIBERSC-1-RX Single SC 3G Fiber Reciever
- Single SC fibre RX SFP for AJA rackmount converters
Usually ships in 3 - 4 weeks
You Pay:
$575.00
AJA FIBERLC-2-TX Dual LC 3G Fiber Transmitter
- Dual LC 3G fiber SFP TX Transmitter for AJA rackmount converters
Usually ships in 3 - 4 weeks
You Pay:
$845.00
AJA FIBERLC-2-RX Dual LC 3G Fiber Receiver
- For rackmount converters
- Dual LC 3G fibre
Usually ships in 3 - 4 weeks
You Pay:
$845.00
AJA Kona LHi PCIe Card
HD / SD 10-bit digital and 12-bit Analogue PCIe card
Usually ships in 3 - 4 weeks
You Pay:
$4,225.00
You Pay:
$269.00
Matrox MXO2 PCIe Host Adaptor ExpressCard
ExpressCard/34 for Mac or PC Laptop
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$269.00
AJA FS1-X Frame Synchronizer & Converter with MADI Audio
- Analogue / Digital Signal Convertor
- 1RU Chassis, Vertically Stackable
- 16-Ch AES Audio, 8-Ch Analogue Audio
- 64-Ch MADI Audio over Coax or Fibre
- GPI and LAN Control
Usually ships in 3 - 4 weeks
You Pay:
$9,890.00
AJA KONA 4 R0-S05
- Supports 4K Video up to 60 fps
- 4K I/O Via SDI or HDMI
- Uncompressed 4:4:4/4:2:2 1080p I/O
- Input/Output 1080p Video Simultaneously
Usually ships in 3 - 4 weeks
You Pay:
$5,610.00
AJA KONA 4 R0-S03
- Supports 4K Video up to 60 fps
- 4K I/O Via SDI or HDMI
- Uncompressed 4:4:4/4:2:2 1080p I/O
- Input/Output 1080p Video Simultaneously
Usually ships in 3 - 4 weeks
You Pay:
$5,340.00
AJA KONA 4 R0-S02
- Supports 4K Video up to 60 fps
- 4K I/O Via SDI or HDMI
- Uncompressed 4:4:4/4:2:2 1080p I/O
- Input/Output 1080p Video Simultaneously
Usually ships in 3 - 4 weeks
You Pay:
$5,610.00
AJA CORVID 88 8-Channel 3G-SDI I/O Card (Low Profile)
- PCIe 2.0, 8-Lane Card.
- 8 x SD/HD/3G-SDI I/O Connectors.
- Supports SD, HD, 2K, UHD 4K, and DCI 4K.
- High Frame-Rate 50p and 60p.
- 8/10-bit YCbCr and RGB Frame Buffer.
Usually ships in 3 - 4 weeks
You Pay:
$7,835.00
AJA CORVID 22 PCIe 4x Card with Five 1.0/2.3 to BNC Pigtail Adapters
- Transfer 8-/10-Bit Uncompressed Data.
- 2 Independent Channels for Input/Output.
- Supports 3G/HD/SD-SDI/SD/2Kx1080 Formats.
- Separate LTC/Metadata/RS-422 per Channel.
- Compatible with Windows/Linux OS.
Usually ships in 3 - 4 weeks
You Pay:
$3,930.00
AJA CORVID 44 Low-Profile 8-Lane PCIe Express Gen 2.0 Card (No Cable)
- PCIe Express Gen 2.0 8-lane.
- Up to four independent* channels 3G, HD, SD-SDI I/O.
- All SD/HD/2K x 1080/4K video formats.
- 3G input/output for High Frame Rate (HFR) support.
- 8/10-bit YCbCr and 12- bit RGB frame buffer formats.
- 2 independent Mixer/Keyer widgets.
- 4 independent 16-channel 48 kHz SDI embedded audio I/O engines.
- Analog Colour Black or HD Tri-Level Sync.
Usually ships in 3 - 4 weeks
You Pay:
$5,050.00
AJA KONA 4 8-Lane PCI-E2 A/V Desktop I/O Card
- Supports 4K Video up to 60 fps.
- 4K I/O Via SDI or HDMI.
- Uncompressed 4:4:4/4:2:2 1080p I/O.
- Input/Output 1080p Video Simultaneously.
- Hardware Up/Down/Cross-Conversion.
Usually ships in 3 - 4 weeks
You Pay:
$5,340.00
AJA openGear 1x9 3G-SDI Reclocking DA
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Input: 1x 3G-SDI BNC.
- Outputs: 9x 3G-SDI BNC.
- Support for HDR – High Dynamic Range video.
- Monitor via openGear DashBoard.
- Passes embedded audio, all ancillary data including closed caption and time code.
- Input Present and Input SMPTE Lock LEDs.
- Automatic input equalization and output reclocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- Power: 2.5 watts max per card.
- Hot swappable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,405.00
AJA KONA 1-S Short 3G-SDI 2K Capture & Playback Card
- 1-Ch 3G-SDI 2K/HD 60p Capture & Playback.
- Short, Low-Profile Version for Developers.
- Selectable HD/SD Reference/LTC Input.
- Simultaneous Monitoring During Capture.
- Mac/Win/Linux 2-Lane PCIe 2.0 Compatible.
Usually ships in 3 - 4 weeks
You Pay:
$1,775.00
AJA openGear 1-Channel 3G-SDI/LC Single Mode LC Fiber Transceiver with DashBoard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Inputs: 1x 3G-SDI BNC; 1x Single Mode LC Fiber.
- Outputs: 1x 3G-SDI BNC; 1x Single Mode LC Fiber.
- Monitor via openGear DashBoard.
- Input Present and Input SMPTE Lock LEDs.
- Automatic detection and reclocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- Nominal Wavelength: 1260-1620 nm.
- Power: 2.5 watts.
- Hot swap capable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,830.00
AJA openGear 2-Channel 3G-SDI to Single Mode LC Fiber Transmitter with DashBoard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Inputs: 2x Independent 3G-SDI Inputs, BNC connectors.
- Outputs: 2x Independent single mode optical fiber, LC connectors.
- Monitor via openGear DashBoard.
- Input Present and Input SMPTE Lock LEDs.
- Automatic detection and re-clocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- All other rates are passed through and not reclocked.
- Wavelength: 1310 nm.
- Optical Power: -5dBm (min), 0dBm (max).
- Power: 2.5 watts.
- Hot-swap capable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,830.00
AJA openGear 2-Channel Single Mode LC Fiber to 3G-SDI Receiver with Dashboard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Inputs: 2x Single Mode LC Fiber.
- Outputs: 2x 3G-SDI BNC.
- Monitor via openGear DashBoard.
- Input Present and Input SMPTE Lock LEDs.
- Automatic detection and reclocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- Nominal Wavelength: 1260-1620 nm.
- Power: 2.5 watts.
- Hot swap capable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,830.00
AJA openGear 1 Channel 3G-SDI to Multi-Mode LC Fiber Transmitter
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Inputs: 1x 3G-SDI with SDI Loop out.
- Outputs: 1x 3G-SDI BNC Output; 1x Multi-Mode LC Fiber Output.
- Monitor via openGear DashBoard.
- Input Present and Input SMPTE Lock LEDs.
- Automatic detection and reclocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- Nominal Wavelength: 850 nm.
- Power: 2.5 watts.
- Hot swap capable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,955.00
AJA openGear 1-Channel Multi-Mode LC Fiber to 3G-SDI Receiver with DashBoard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic.
- Input: 1x Multi-Mode LC Fiber.
- Outputs: 2x 3G-SDI BNC Outputs (Mirrored).
- Monitor via openGear DashBoard.
- Input Present and Input SMPTE Lock LEDs.
- Automatic detection and reclocking.
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select.
- Nominal Wavelength: 850 nm.
- Power: 2.5 watts.
- Hot swap capable.
- Compatible with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,955.00
AJA openGear Dual 1x4 12G-SDI Distribution Amplifier
- Dual 1x4 12G-SDI openGear Distribution Amplifiers.
- 2x 12G-SDI BNC inputs.
- 8x noninverting 12G-SDI BNC outputs.
- Format agnostic 270 Mbps – 12 Gbps video formats.
- Automatic input equalisation and output reclocking.
- Support for HDR video.
- Passes embedded audio, all ancillary data including closed caption and time code.
- Input Present and Input SMPTE Lock LEDs.
- 10x 12G-BNC rear connector module included.
- Power: 4.5 watts.
- Hot swappable.
- DashBoard Support with OGX, OG3 and DFR-8321 openGear frames.
Usually ships in 3 - 4 weeks
You Pay:
$1,955.00