Camera-Back H.264 Wireless Encoder, Mounts to Any Gold Mount Camera


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives
North Island
$12.07
South Island
$15.21

This Teradek Cube Pro is a camera-back encoder that provides a compact wireless solution for local monitoring and proxy recording. It utilises high profile H.264 compression and supports resolutions up to 1080p 30/i60 over 2.4/5GHz WiFi, Ethernet, and 3G/4G/LTE cellular networks via an optional USB modem. It features an HD-SDI input and Gold-Mount. It also has an OLED display for rapid configuration and rechargeable Lithium-Ion battery, which enables users to swap external power sources without powering the unit down.

Key Features

  • Co-processor to enhance wireless workflow
  • Up to 10 simultaneous streams to iOS devices
  • Up to 10Mbps broadcasts over WiFi
  • OLED Display for easy setup and status monitoring
  • Li-Ion Internal Battery to allow seamless external battery exchanges
  • Rugged enclosure, mounts to any Gold Mount camera
  • Supports resolutions up to 1080p30/i60
  • Blu-Ray Quality Video Over Any IP Network, Utilising H.264 High Profile
  • Low Power Consumption (4.5W)
  • 10/100 Ethernet, USB 2.0 Connectivity
  • MIMO Access Point
  • Headphone output
  • Looping HD-SDI output
  • Regulated power outputs - 12V or 8.4V

Specifications

Video InputsHD/SD-SDI on BNC
Looping Video OutputsHD/SD-SDI on BNC
Supported Resolutions1080i 50/59.94/60
1080p 23.98/24/25/30
1080PsF 23.98/24/25
720p 50/59.94/60
576i
480i
Video CodecCompression Algorithm: Baseline, Main and High Profile H.264
Bit Rate: 250 kbps to 10 Mbps
Built in Video Scaler and Deinterlacer
Power Output40 mW
Protocol SupportMPEG-TS (Optional paid licence)
RTMP, HLS, RTSP/RTP
AudioAudio Compression: AAC-LC, MPEG Layer 2
Embedded Audio Input
Analogue Line or Mic in, adjustable gain
Headphone output, adjustable volume
ControlDedicated USB port for camera control
ModemDedicated USB port for Cell modems
InterfacesFeature-rich WebUI for configuration and control
OLED LCD Display with joystick Navigation buttons
On/Off and Reset Switch
Full size SD
Two Powered USB 2.0 host ports
NetworkEthernet: 10/100BASE-T
WiFi: Dual Band 802.11 a/b/g/n MiMO
USB Modem support
PowerSupports optional Gold Mount battery
Internal Rechargeable Lithium Ion Battery (for battery swap purposes)
Nominal Power Consumption: 5 W + 2.5 W (max) per USB device
Nominal Power Consumption while Charging: up to 6 W + 2.5 W (max) per USB device
Power Input: 6-28 V DC
Dimensions4.2 x 1.6 x 5.9" (11 x 4 x 15 cm)
Weight1.25 lb (0.57 kg)
Product:
Teradek Cube Pro with Gold Mount
Manufacturer:
Teradek
Model:
10-0167
SKU:
10-0167
RM Product #:
31273