Cinetics Axis360 Motor and Controller has been discontinued, here are some related products you might like:
The Axis360 Motor and Controller from Cinetics lets you create dynamic video and time lapse photography sequences with fluid and precise motorised slides, pans, and tilts. It features the powerful Axis360 digital stepper motor, which proves smooth or incremental movements, and a Controller unit for running the motor. A travel bag is included for storing the Axis360 and Controller.
The Axis360's motor drive has a 1/4"-20 threaded screw for attaching your camera or a mounting bracket. A 1/4"-20 mounting thread on the bottom of the unit is provided for mounting the motor to a tripod, slider, or other support system. The motor can be configured to pan a camera, tilt when used with a tripod and the optional Balance Kit, and slide when used with the Axis360 Pro slider's pulley system. The motor supports up to 11 pounds, making it compatible with most DLSR, mirrorless, and digital cinema cameras.
The Controller is the brains behind the Axis360, using CineMoco software to control smooth movement and synchronised time lapse photos. The Controller works with most video cameras and can sync moves and time lapse photos on most Canon and Nikon DLSR cameras using optional cables. A built-in rechargeable battery provides six hours of continuous operation on a single charge or up to 24 hours in power save mode. In video mode, the Controller unit provides speeds up to 110° per second.
For time lapse photography, it enables incremental movements as small as 0.03°. For multi-axis moves, additional motors and controllers are needed. Controllers can be controlled individually or daisy chained together with a standard 3.5mm stereo cable for synchronised control.
Note: An optional shutter release cable is required to fire your camera during time lapse photography. It is important to select the right cable based on the port type on your camera.
- Supports up to 5kg
- Get precise shots with variable speeds up to 110°/sec and accurate to 0.1°
- 360° motorised pan or tilt allows for smooth, repeatable movements
- Combine multiple Axis360 Motors and Controllers for 1, 2, or 3 axis movement
- Software is open source and upgradeable
- Compatible with Dragonframe stop motion animation software
- Built-in rechargeable battery
|Load Capacity||11 lb (5 kg) vertically or horizontally, up to 1.4 cm/s|
|Travel Speed||Variable speeds up to 2.4 cm/s or 110°/s, 0.1° accuracy|
1 x DC power input
1 x Motor control port
1 x Shutter release cable port
1 x 3.5mm Expansion port
1 x Micro USB port
|Battery||Built-in rechargeable battery|
|Battery Runtime||6 hours (continuous mode)|
24 hours (power saving mode)
|Weight||2.6 lb (1.2 kg)|