Product Features
  • 256GB Drive Capacity
  • M.2 2242 Form Factor
  • SATA III 6 Gb/s Interface
  • Up to 460 MB/s Sequential Write Speed
  • Up to 560 MB/s Sequential Read Speed


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives
North Island
$3.72
South Island
$3.72

Increase your Windows or Linux system's performance by installing the Transcend 256GB MTS400 SATA III M.2 Internal SSD which delivers read speeds of 560 MB/s and write speeds of 460 MB/s. This SSD utilises an SATA III interface that provides 6 Gb/s transfers speeds and supports random 4K reads of 70,000 IOPS and 4K writes of 70,000 IOPS. Its form factor is type 2242 and is installed in a computer with an available M.2 slot that is 42mm long. When using this SDD with a hard drive, you can use Intel's Smart Response Technology to constantly monitor or move your most accessed programmes to the SSD, and stores all other programmes and files to the hard drive. It also offers TRIM support, which helps reduce write times to the drive allowing you to save information faster and prolongs the life the drive.

Key Features

  • M.2 Type 2242 form factor (42mm) for mobile computing devices
  • Supports Wear Levelling and Intelligent Block Management
  • DDR3 DRAM cache
  • Supports DevSleep mode, which allows devices to completely shut down the SATA interface and conserve battery life, unlike existing partial/slumber states
  • Supports Power Shield, S.M.A.R.T., TRIM, and NCQ commands
  • RoHS compliant

Intel Smart Response Technology
Transcend's SATA III 6 Gb/s MTS400 M.2 SSD supports Intel Smart Response Technology (ISRT), which allows you to configure your computer system with an SSD used as cache memory between the hard disk drive and system memory. This provides the advantage of having a hard disk drive for ample storage capacity while delivering an SSD-like overall system performance experience. ISRT works by monitoring which programmes and files you access most frequently and stores them on the SSD. As a result, application launch speed and overall system responsiveness are improved, while the large capacity of the hard drive is free to store all your other programmes and files. In this configuration, only one drive letter is displayed; no additional drive letter is required for the SSD used as cache.

Storage
Drive Capacity256.00 GB
Performance
InterfaceSATA III (6 Gb/s)
Random Read Speed70,000 IOPS (4 KB Files)
Random Write Speed40,000 IOPS (4 KB Files)
Sequential Read Speed560 MB/s
Sequential Write Speed160 MB/s
Physical
Drive TypeSSD
Form FactorM.2 2242
SSD Specs
Flash Memory TypeMulti-Level Cell (MLC)
Electrical
Power Draw3.67 W (Active)
0.55 W (Standby)
Supported Voltage3.3 VDC
Environmental
Operating Shock1500 G / 0.5 ms
Operating Vibration3 G / 5 to 800 Hz
Storage Vibration5 G / 5 to 800 Hz
Operating Temperature0 to 70°C
Storage Temperature-40 to 85°C
Operating Humidity0 to 95%
General
CertificationsBSMI, COE, FCC, RoHS, as per Manufacturer
Dimensions (W x H x D)42.0 x 22.0 x 3.5 mm
Weight4 g
Product:
Transcend 256GB MTS400 SATA III M.2 Internal SSD
Manufacturer:
Transcend
Model:
TS256GMTS400
SKU:
TS256GMTS400
RM Product #:
25785
Capacity:
256 GB