INOVATIV

Inovativ Mitchell Plate

Attaches to Inovativ Horseshoe Mount
Supports Mitchell Base Tripod Heads

You Pay: $239.00

Inovativ Echo 36 Workstation

No Tools Required for Assembly
Rigid Main Frame Increases Stability
25 cm Height Adjustment with Top Shelf
Foot Brake System
Includes Two Drawers; 6.5 cm Port for Cables

You Pay: $9,849.00

INOVATIV Pro Monitor Mount With VESA Plate And Hardware

Brand new design
Travel friendly but strong
Anodised Orange 100 x 100 plate
Freely rotate the monitor or easily lock it in a vertical or horizontal position

You Pay: $539.00

Inovativ Robo Cup Portable Clamp-On Caddy (Black)

Portable Clamp on Caddy Cup Holder
Perfect for INOVATIV Carts
Clamp to Anything up to 5cm in Diameter
Dual Cups

You Pay: $60.95

Inovativ Voyager 36 EVO Equipment Cart with X-Top Keyboard Shelf, 10" Tires

Fast, Tool-Free Assembly/Disassembly
Collapses into Flight-Ready Travel Case
Built-In Travel Handle & Rolling Wheels
Keyboard Shelf with Threaded Rail Plates
Pneumatic Tires on Sealed Bearing Wheels with Foot Brake

You Pay: $8,899.00

Inovativ Robo Cup Plus Accessory (Black)

Poly-Resin with UV-Inhibitors
Attaches to the Portable Clamp-On Caddy

You Pay: $29.95

Inovativ Voyager 36 NXT Equipment Cart

Collapses into Flight-Ready Travel Case
Built-In Travel Handle & Rolling Wheels
Supports up to 4 Threaded Rail Plates
Fixed-Height Top Shelf
Enhanced Foot Brake System

You Pay: $6,799.00

Inovativ Robo Cup Portable Clamp-On Caddy (Orange)

Portable Clamp on Caddy Cup Holder
Perfect for INOVATIV Carts
Clamp to Anything up to 5cm in Diameter
Dual Cups

You Pay: $60.95

INOVATIV QR System Monitor Plate

Attach/Remove VESA Monitors in Seconds
Monitor VESA Plate
100 x 100 and 75 x 75 VESA Standards

You Pay: $169.00

INOVATIV Replacement VESA Plate Assembly for Pro Monitor Mount

Spare or replacement assembly for Pro Monitor Mount

You Pay: $239.00

Inovativ X-Top Close Out for Voyager 42

Closes off 4th Side of Cart Top

You Pay: $139.00

INOVATIV X-Top Close Out for Voyager 36

Closes off 4th Side of Cart Top

You Pay: $119.00

INOVATIV X-Top Close Out for Voyager 30

Closes off 4th Side of Cart Top

You Pay: $139.00

INOVATIV Short Crossbar for Echo 30

Allows Attaching Additional Accessories
Black Anodised Aluminium Construction

You Pay: $309.00

INOVATIV QR System Receiver

Works with QR VESA & QR Pro VESA

You Pay: $209.00

Inovativ DigiClamps Universal for Laptops (Set of 2)

Compatible with all Inovativ DigiPlates
Clamps come in pairs
5052 aluminium construction, anodised Black
For laptops 1 to 2.5 cm thick

You Pay: $259.00

Inovativ Crossbar for Deploy Gen IV Carts

Secures via Deploy Gen IV Cart Threads
Adds Stability and Accessory Mounting
Add Hooks, Brackets, Handles, and More

You Pay: $209.00

Inovativ Hi-Hat Rails for Apollo Carts

Built for Apollo 40 & 52 Carts
Includes 2 Rails and 6 Bolts for underside of cart
Designed to work with standard Hi-Hats
Quick Installation

You Pay: $189.00

Inovativ Quick Grips (Set of 2)

Slide-On Handgrips for Cart Poles
For Echo, Ranger, Scout & Voyager Carts

You Pay: $309.00

Inovativ 5/8" Baby Pin Mast Adapter

Mount 5/8" Baby Pin to 1.75" Mast
48 cm of Height Adjustment

You Pay: $539.00

Inovativ Short Crossbar for Echo/Ranger 36/48

Simply screws into the carts arm
Built for Echo & Ranger 36/48
6061 T6 Aluminium
Anodised Black
Lightweight, strong and rigid

You Pay: $309.00

Inovativ Long Crossbar for Echo/Ranger 30

Easy to mount, simply screws into the carts arm
Built for Echo & Ranger 30 Long
6061 T6 Aluminium
Anodised Black
Lightweight, strong and rigid

You Pay: $309.00

Inovativ A-RV Threaded Rail Plates for Voyager NXT Carts

A mix of 1/4-20 and 3/8-16 threaded holes
Mounts to the top shelf
Machined from 6061 T6 aluminium
Anodised black
Only for Voyager carts

You Pay: $239.00

Inovativ 2 RU Station Upgrade for WorkSurface Pro

Upgrade Your WorkSurface Pro
Add a 2 RU Rackmount under Surface
Aluminium Construction
Provides 2U Rack space for Axis
Can NOT be used with top draw for Workstation Pro

You Pay: $539.00

Inovativ DigiClamps for LaCie Rugged STD Hard Drives

Compatible with all DigiPlates
Clamps come in pairs
Custom stainless steel hardware makes securing the clamps effortless
Custom clamps designed for LaCie Rugged model external hard drives
Open design allows drives to remain cool and avoid heat build up

You Pay: $139.00

Inovativ Neutrik Plate (1x)

For use with Workstation Pro
Can be Added to any of the 4 Open Slots
1 Plate

You Pay: $42.95

Inovativ Arca Swiss Quick Release Plate

Constructed of 6061 T6 Aluminium
Anodised Black
Made in USA

You Pay: $119.00

Inovativ Hideaway Latch Apollo 52 Top Shelf Lip

Allows Unobstructed Access to Top Drawer
Holds Up the Lip of Cart's Top Surface

You Pay: $179.00

Inovativ 150mm Ball Plate

Machined from Aluminium
Anodised INOVATIV Orange
150mm Ball Mount
Includes all Additional Mounting Hardware

You Pay: $539.00

INOVATIV DigiClamps for LaCie Rugged Mini Hard Drives (Set of 2)

Attach to Any DigiPlate
Open Design for Maximum Cooling
Stainless Steel Thumbscrews
0.75 x 2.5 x 2.5"

You Pay: $139.00

Inovativ DigiClamps for LaCie Rugged RAID Hard Drives (Set of 2)

Attach to Any Inovativ DigiPlate
Open Design for Maximum Cooling
Stainless Steel Thumbscrews
Custom designed to be used with LaCie Rugged RAID

You Pay: $139.00

Inovativ Baby Pin Bracket with Pin for Dual Bar

Provides offset support for Dual Bar
Add Monitor to Dual Bar
Compatible with Baby Pin Accessories
Connects to Bar with 3/8"-16 Screw

You Pay: $169.00

Inovativ DigiHanger

Constructed of 6061 T6 aluminium
Anodised Orange
Adds an anchor point to your DigiPlate to hang, tie or lock items
Pass-Through Holes for Cable Management

You Pay: $109.00

Inovativ Centre Mast Bracket for Deploy Gen IV Carts

Attaches to the back of Deploy
Can support up to 27kgs
Doesn't restrict any workspace

You Pay: $139.00

Inovativ Baby Pin Attachment for Insight Monitor Mount System

Single baby-pin
Supports Compatible Receivers, Transmitters, Antennas & More
Secures to Vertical System Bracket on Inovativ Insight

You Pay: $149.00

Inovativ Digiclamps Macbook Air

Compatible with all Inovativ DigiPlates
Clamps come in pairs
Constructed of 5052 aluminium, Anodised Black
Custom clamps for MacBook Air

You Pay: $179.00

Inovativ AXIS Weight Hanger

Keep Your Grip Stand Stable
Compatible with AXIS or American Stands
Steel Construction with Foam Core
Hook for Weight Bag

You Pay: $169.00

Inovativ Load Handles for Deploy Gen IV Carts (Pair)

Attach Handles to Deploy Gen IV Cart
ODI Ruffian Lock-On Grip
Slip-Free, Knurled Grip
Attach with Integrated Screw

You Pay: $169.00

Inovativ AXIS Tie-Down Anchors (4-Pack)

4 x Anchors with Screws & Nuts
Provides extra security when moving Axis
For AXIS, Case & Digi Platform Mounting
Pre-drilled with mounting hardware
Attach Straps or S Hooks

You Pay: $119.00

Inovativ Stand Hanger for Apollo Carts (Black)

Designed for Apollo Carts
Black Anodised 5052 Aluminium
Compatible with American Grip Stands
Works with Stands with Hanger Pins

You Pay: $169.00

Inovativ DigiBracket Tripod Mount For DigiPlates

Attaches a DigiPlate directly to your tripod legs
Strong 6061 aircraft grade aluminium construction
Compatible with all DigiPlates
Constructed of 6061 T6 Aluminium
Anodised Black

You Pay: $309.00

Inovativ Stand Hanger for Scout/Voyager Carts (Black)

Designed for Scout/Voyager Carts
Black Anodised 5052 Aluminium
Compatible with American Grip Stands
Works with Stands with Hanger Pins

You Pay: $139.00

Inovativ Stand Hanger for Ranger/Echo Carts (Black)

Designed for Ranger/Echo Carts
Black Powder-Coated 5052 Aluminium
Compatible with American Grip Stands
Works with Stands with Hanger Pins

You Pay: $169.00

Inovativ AXIS Weight Bag (11 kg)

Dual-Wing Hanging Design
Cordura Nylon Bag, Steel and Foam Fill
Water-Resistant, Weather Resistant
Dual Cordura Handle with Hanging Loops
For AXIS Stand, Booms, Tripods

You Pay: $189.00

Inovativ DigiLegs for DigiPlate Pro/Lite (Set of 4)

Turns DigiPlate Pro/Lite into a Table
Attaches to the Bottom of Any DigiPlate
Makes Room for Accessories under Plate
7 cm Legs with Rubber Pads on Bottom
Anodised Black Aluminium

You Pay: $179.00

Inovativ Digibase

Baby-Pin mount
Mount the DigiPlatePro or DigiPlateLite to baby-pin
Includes hardware

You Pay: $179.00

Inovativ Corner Plug With Baby Pin For Apollo, Deploy & Center Mast Bracket

Baby Pin is 6061 aluminium with clear anodise
Corner Plug machined 6061 T6 aluminium and anodised orange
For Apollo, Deploy & Center Mast Bracket
Useful to mount Inovativ's DigiSystem Pro and Lite

You Pay: $169.00

Inovativ Channel Block for Ranger/Echo Carts

Machined from 6061 T6 aluminium
Anodised black with INOVATIV laser etching
Stainless steel hardware

You Pay: $189.00

Inovativ Offset Baby Pin Mount

Offset baby pin system
Attaches to rods via Convi/Mafer clamp
Supports up to 20kgs
Add Baby Pin to AXIS or Grip Stand
Compatible with Baby Pin Accessories

You Pay: $239.00

Inovativ DigiBar iMac and Monitor Display Bracket for DigiPlate Pro

Works with all generations of aluminium iMacs and Cinema Displays
Custom pads ensure a strong grip
Pads also protect surface of iMac or Display
Anodised Black
Not compatible with the DigiPlate Lite

You Pay: $239.00

1 2 3 4 Next >