Direct Injection (D.I.) Boxes

• Unbalanced 1/4" Inputs.
• Balanced XLR Outputs.
• Passive Operation.
• Ground Lift.

• Selectable Active/Passive Pickup Input.
• Z-Tone Variable Impedance.
• Switchable Pure/JFET Channel Tone.
• Switchable -20 dB Pad.
• 1/4" Thru and Main Outputs.

• Designed for the Rigours of Live Concert Touring
• Illuminated Switches
• Power Indicator LED’s
• Thick Aluminium Extrusion
• Tough Silicone Rubber Corners

• Balanced Transformer-Isolated Output
• Dual-Impedance Inputs
• Illuminated 30dB Pad and Earth Lift Switches
• Built for the Road

• Selectable Active/Passive Pickup Input.
• Z-Tone Variable Impedance.
• Switchable Pure/JFET Channel Tone.
• Buffers Signal for Long Cable Runs.
• Boost Circuit Adds Volume and Drive.

• Unbalanced 1/4" and XLR Inputs.
• Balanced XLR Output.
• Battery or Phantom Powered.

• Premium Performance.
• Rugged Design.
• Stackable Chassis with Durable Rubber Foot.
• Gold-plated Neutrik XLR Connector.

• 4-Channel Active DI
• Connect a Keyboard to a Mic Input
• Connect a Guitar or Bass to a Mic Input
• 4 x XLR-1/4" Combination Inputs
• 8 x XLR Outputs (2 per Channel)

• Dual Channel
• Passive
• 1/4" Mono, 1/8" Stereo and RCA Inputs
• Input Level Controls
• Ground Lift Switches

• Balanced XLR Outputs
• Transformer Isolation
• Provides Ground Isolation
• Stereo/Mono Switch
• USB Powered

• Active.
• Polarity Switch.
• Ground Lift Switch.
• Rugged Construction.

• Connect Line/Hi-Z Signals to Mic Inputs.
• 1/4" Input.
• Parallel Thru-Put for Amp Connections.
• Line/Instrument Switch.
• Active Design for Passive Instruments.

• Class A Circuitry
• Channel Independent Ground Lifts
• Per Channel: 1x 1/4" & 1x RCA Inputs
• 1x Stereo 1/8" Input
• 2x XLR Outputs

• Connect Line/Hi-Z Signals to Mic Inputs.
• 1/4" Input.
• Parallel Thru-Put for Amp Connections.
• Line/Instrument Switch.
• Passive Design for Active Instruments.

• Pristine Audio Fidelity
• Ground Lift Switch
• Voltage Gain Selector

• Route a Stereo USB Source to Mic Inputs
• Converts USB to Balanced Analogue
• USB 2.0 Type-B Input
• Two XLR 3-Pin Balanced Outputs
• 3.5mm Stereo Headphone Output

• Route a Stereo Instrument to Mic Inputs
• Converts Unbalanced to Balanced
• Converts High Impedance to Low Impedance
• Two 1/4" Unbalanced Inputs
• Two 1/4" TS Through Jacks

• Passive re-amping device
• Allows for playing prerecorded tracks through amplifiers and pedals and re-record the results
• Level control for fine tuning the gain
• Ground lift switch, when activated helps to reduce hum and buzz caused by ground loops

• Stereo-to-Mono Direct Box
• Custom-Built Midas Transformer
• Passive Design, No Power Required
• L/R Adjustable Level Controls
• RCA and 3.5mm TRS Stereo Inputs

• Connect Keyboards or Samplers to Mixers
• Connects MP3 and CD Players to Mixers
• Extended Dynamic Range
• Midas Sound Quality
• Compact and Rugged Construction

• For Multimedia Applications
• Mono 1/4", Stereo RCA, and 3.5mm Inputs
• Mono XLR Line-Level Input
• Mic-Level Mono Sum at XLR Out
• -15 dB Pad

Passive DI Box. Instrument/Line in switch. Ground lift switch to eliminate hum.

• High dynamic headroom with minimum phase and harmonic distortion
• High input impedance reduces loading
• Very good electronic performance thanks to SMD components and low noise IC
• Very efficient ground lift circuitry

• Connect an Instrument to a Mic Input
• Converts Unbalanced to Balanced
• Converts High Impedance to Low Impedance
• 1/4" Unbalanced Input
• 1/4" Through Jack

• Connect a Guitar, Bass, or Keyboard to PA.
• Extended Dynamic Range.
• MIDAS Sound Quality.
• Compact and Rugged Construction.
• Instrumentation-Grade Input Circuit.

• Connect an Instrument to a Mic Input
• Converts Unbalanced to Balanced
• Converts High Impedance to Low Impedance
• 1/4" Unbalanced Input
• 1/4" Through Jack

• Connect Keyboards or Samplers to Mixers
• Connect Musical Instruments to Mixers
• Extended Dynamic Range
• Midas Sound Quality
• Compact and Rugged Construction

• Single Channel
• Battery or Phantom Powered
• Ground Lift
• Input Pad
• Rugged Enclosure

• Laser-etched white text and artwork
• RoHS compliant
• Made in USA

• Connects a Mobile Device to a PA/Mixer
• 3.5mm TRS Male Plug on 5' Attached Cable
• Switchable -15 dB Pad
• Custom-Wound Transformers
• 2 x 1/4" TRS Outputs
• Balanced XLR 3-Pin Output

• For Keyboards
• 2 x 1/4" Inputs with Thru Outputs
• -15 dB Pad for Active Instruments
• Handles Huge Transients without Chocking

• Eliminates Hum & Buzz from Ground Loops
• Zero Phase & Harmonic Distortion
• Jensen Transformer Equipped

• Active Signal Patch
• Eliminates Hum and Buzz common to PCs
• 1/4" / RCA / 3.5mm Inputs for Any Source
• -15 dB Pad, Ground Lift Switch
• 48V Phantom Powered

• Increased Dynamic Range and Headroom
• 48V Phantom Powered & Switching Supply
• -15 dB Pad Switch

• Equipped with Jensen Transformers
• -15 dB Pad Per Channel
• Flat Frequency Response
• Transformer-Isolated I/O
• 14-Gauge Steel Construction