Radial Engineering StageBug SB-1 Active Acoustic Direct Box
Overview
Description
The Radial Engineering StageBug SB-1 Acoustic is an active direct box that has been designed to provide a quick and dependable connection from your instrument to the PA. It converts the hi-Z output from your instrument to a balanced low-Z signal via standard 3-pin XLR connectors. Balancing the signal reduces noise, enables longer cable runs, and improves the sound quality by matching the instrument's impedance with that of the PA. No batteries or external power supplies needed. You simply plug in and you are set to go.
The active circuit features 220kΩ input impedance to eliminate problems with loading while delivering a smooth, warm sound to the audio system. This is particularly important when interfacing vintage guitars with low output pickups when you plan to do some recording or re-amping. This unit is also equipped with a -12 dB pad, which reduces input sensitivity of the circuit to enable louder instruments to be used without distortion. To reduce feedback, toggling the 180° polarity switch helps eliminate hot spots on stage that can cause low-frequency resonance.
Made to fit inside a guitar case for players that are on the move, this compact DI box delivers enhanced sound throughput. Although the SB-1 has been optimised for use with acoustic guitars, it is also well-equipped to handle electric bass guitars and keyboards.
Specifications
Circuit Type | Active buffer with phase splitter |
Frequency Response | 20 Hz to 20 kHz |
Total Harmonic Distortion | <0.006% |
Dynamic Range | >100 dB |
Input Impedance | 800 k / 23 k |
Maximum Input | +2 dBu / +8 dBu |
Gain | +1.3 dBu / +4.4 dB |
Clipping Level | Output: +3.3 dBu / +12.3 dBu |
Output Impedance | 330 Ω |
Equivalent Input Noise | -101 dBu |
Noise Floor | -97 dBu |
Intermodulation Distortion | <0.01% |
Deviation from Linear Phase | 25 / 12° maximum |
Switches | Pad, Phase |
Functions | Automatic merge |
Input Pad Switch | -12 dB |
XLR Configuration | + = Pin 2, - = Pin 3, Ground = Pin 1 |
Polarity Reverse | Yes, 180° |
Construction | 16 gauge steel chassis and outer shell |
Finish | Baked enamel |
Power | 48 V phantom power |
Dimensions | 11.40 x 4.70 x 3.40 cm |
Weight | 0.25 kg |
In The Box
- Radial Engineering StageBug SB-1 Active Acoustic Direct Box
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Radial Engineering StageBug SB-1 Active Acoustic Direct Box
- Manufacturer: Radial
- Model: SB-1
- SKU: RA-SB-1
- RM Product #: 96292
- Warranty: 5 year manufacturer warranty