Direct Injection (D.I.) Boxes

• Premium Performance.
• Rugged Design.
• Stackable Chassis with Durable Rubber Foot.
• Gold-plated Neutrik XLR Connector.

• Connect an Instrument to a Mic Input
• Converts Unbalanced to Balanced
• Converts High Impedance to Low Impedance
• 1/4" Unbalanced Input
• 1/4" Through Jack

• Balanced XLR Outputs
• Transformer Isolation
• Provides Ground Isolation
• Stereo/Mono Switch
• USB Powered

• Route a Stereo Instrument to Mic Inputs
• Converts Unbalanced to Balanced
• Converts High Impedance to Low Impedance
• Two 1/4" Unbalanced Inputs
• Two 1/4" TS Through Jacks

• Unbalanced 1/4" Inputs.
• Balanced XLR Outputs.
• Passive Operation.
• Ground Lift.

• Route a Stereo USB Source to Mic Inputs
• Converts USB to Balanced Analogue
• USB 2.0 Type-B Input
• Two XLR 3-Pin Balanced Outputs
• 3.5mm Stereo Headphone Output

Passive DI Box. Instrument/Line in switch. Ground lift switch to eliminate hum.

• Connect an Instrument to a Mic Input
• Converts Unbalanced to Balanced
• Converts High Impedance to Low Impedance
• 1/4" Unbalanced Input
• 1/4" Through Jack

• Unbalanced 1/4" and XLR Inputs.
• Balanced XLR Output.
• Battery or Phantom Powered.

• Stereo-to-Mono Direct Box
• Custom-Built Midas Transformer
• Passive Design, No Power Required
• L/R Adjustable Level Controls
• RCA and 3.5mm TRS Stereo Inputs

• Re-Amping Interface for Multiple Amps
• Stereo/Dual Direct Box
• Variable Input Pad
• Microphone or Instrument Inputs
• Stereo A/V Source to Low Level Inputs

• Single Channel
• Battery or Phantom Powered
• Ground Lift
• Input Pad
• Rugged Enclosure

• Pristine Audio Fidelity
• Ground Lift Switch
• Voltage Gain Selector

• Connect Line/Hi-Z Signals to Mic Inputs.
• 1/4" Input.
• Parallel Thru-Put for Amp Connections.
• Line/Instrument Switch.
• Active Design for Passive Instruments.

• Connect Line/Hi-Z Signals to Mic Inputs.
• 1/4" Input.
• Parallel Thru-Put for Amp Connections.
• Line/Instrument Switch.
• Passive Design for Active Instruments.

• Selectable Active/Passive Pickup Input.
• Z-Tone Variable Impedance.
• Switchable Pure/JFET Channel Tone.
• Switchable -20 dB Pad.
• 1/4" Thru and Main Outputs.

• Passive re-amping device
• Allows for playing prerecorded tracks through amplifiers and pedals and re-record the results
• Level control for fine tuning the gain
• Ground lift switch, when activated helps to reduce hum and buzz caused by ground loops

• Connect Keyboards or Samplers to Mixers
• Connects MP3 and CD Players to Mixers
• Extended Dynamic Range
• Midas Sound Quality
• Compact and Rugged Construction

• 4-Channel Active DI
• Connect a Keyboard to a Mic Input
• Connect a Guitar or Bass to a Mic Input
• 4 x XLR-1/4" Combination Inputs
• 8 x XLR Outputs (2 per Channel)

• Selectable Active/Passive Pickup Input.
• Z-Tone Variable Impedance.
• Switchable Pure/JFET Channel Tone.
• Buffers Signal for Long Cable Runs.
• Boost Circuit Adds Volume and Drive.

• Connect a Guitar, Bass, or Keyboard to PA.
• Extended Dynamic Range.
• MIDAS Sound Quality.
• Compact and Rugged Construction.
• Instrumentation-Grade Input Circuit.

• Connect Keyboards or Samplers to Mixers
• Connect Musical Instruments to Mixers
• Extended Dynamic Range
• Midas Sound Quality
• Compact and Rugged Construction

• Class A Circuitry
• Channel Independent Ground Lifts
• Per Channel: 1x 1/4" & 1x RCA Inputs
• 1x Stereo 1/8" Input
• 2x XLR Outputs

• Dual Channel
• Passive
• 1/4" Mono, 1/8" Stereo and RCA Inputs
• Input Level Controls
• Ground Lift Switches

• Laser-etched white text and artwork
• RoHS compliant
• Made in USA

• Active.
• Polarity Switch.
• Ground Lift Switch.
• Rugged Construction.

• Active direct box and line balancing device
• Suitable for musicians, studios and PA companies
• Phantom or 9V battery powered
• Input attenuation is 0, -20 or -40dB
• Ground lift switch eliminates typical ground loop problems