Processors & Effects

• Classic VCA Compressor Design.
• Add Glue & Control Dynamics.
• Switchable CineMag Transformers.
• Sonic Transparency or Colourful Vibe.
• Selectable High-Pass Filter.

Passive DI Box. Instrument/Line in switch. Ground lift switch to eliminate hum.

• 4x Sources and 3x Monitor Pairs
• Classic Big Knob Volume Control
• Independent Trim on All Sources
• Mono, Mute, and Dim Functions
• 2x4 USB Recording Interface

• 3x Stereo Pairs of 1/4" TRS Speaker Outs
• 2x Stereo Pairs of 1/4" TRS Inputs
• 1x Stereo RCA & 1x Stereo 1/8" Aux Input
• 1x Stereo S/PDIF Digital Input
• 4x 1/4" TRS Stereo Headphone Outs

• Connect Line/Hi-Z Signals to Mic Inputs.
• 1/4" Input.
• Parallel Thru-Put for Amp Connections.
• Line/Instrument Switch.
• Passive Design for Active Instruments.

• Connect an Instrument to a Mic Input
• Converts Unbalanced to Balanced
• Converts High Impedance to Low Impedance
• 1/4" Unbalanced Input
• 1/4" Through Jack

• Optimised for Live Use
• Multi-Band Compressor
• Super-Fast Gate
• Multiple Configuration
• Analogue and Digital I/O

• Selectable Active/Passive Pickup Input.
• Z-Tone Variable Impedance.
• Switchable Pure/JFET Channel Tone.
• Buffers Signal for Long Cable Runs.
• Boost Circuit Adds Volume and Drive.

• Developed for TC's advanced multi-band dynamics processors
• Keep your signal in the digital domain even while performing your fade
• Ideal L/R balance at all levels

• Dual Channel.
• Stereo or Dual-Mono.
• Classic dbx "Auto" Mode.
• Side Chain Insert.
• Separate LED Displays.

• Two by Two Monitor Controller
• 2x Sources and 2x Monitor Pairs
• Classic Big Knob Volume Control
• Mono, Mute, and Dim Functions
• Pristine Audio Quality

• Creates Harmonies with Your Voice
• Seven Editable Effects
• Real-Time Pitch Correction
• Control Effects with Select Microphones
• On-the-Fly Effects Editing

• Re-Amping Interface for Multiple Amps
• Stereo/Dual Direct Box
• Variable Input Pad
• Microphone or Instrument Inputs
• Stereo A/V Source to Low Level Inputs

• Stereo 2-Way / Mono 3-Way Switchable
• Dedicated Mono Subwoofer Output
• Linkwitz-Riley Filters 24 dB/Octave
• Individual Gain & Mutes for All Bands
• Switchable 25 Hz Low Cut Filter

• Route a Stereo USB Source to Mic Inputs
• Converts USB to Balanced Analogue
• USB 2.0 Type-B Input
• Two XLR 3-Pin Balanced Outputs
• 3.5mm Stereo Headphone Output

• Connect an Instrument to a Mic Input
• Converts Unbalanced to Balanced
• Converts High Impedance to Low Impedance
• 1/4" Unbalanced Input
• 1/4" Through Jack

• Selectable Active/Passive Pickup Input.
• Z-Tone Variable Impedance.
• Switchable Pure/JFET Channel Tone.
• Switchable -20 dB Pad.
• 1/4" Thru and Main Outputs.

• 4-Channel Active DI
• Connect a Keyboard to a Mic Input
• Connect a Guitar or Bass to a Mic Input
• 4 x XLR-1/4" Combination Inputs
• 8 x XLR Outputs (2 per Channel)

• Modelled on Hardware TC 1210.
• Spatial Expander + Stereo Chorus Flanger.
• Software with Hardware Interface.
• Thick, Warm, and Lively Sound.
• Hardware Metering for Monitoring.

• Unbalanced 1/4" Inputs.
• Balanced XLR Outputs.
• Passive Operation.
• Ground Lift.

• Premium Performance.
• Rugged Design.
• Stackable Chassis with Durable Rubber Foot.
• Gold-plated Neutrik XLR Connector.

• Channel strip for studio and live sound
• Switchable for mic, line, or instrument-level signals
• Switchable 48V phantom power and phase reverse
• Program-adaptive Gate, VCA compressor, De-esser, and EQ
• Multiband "Tube Saturation" feature for subtle warming effects
• Limiter on the output stage with a preset threshold (+16dB)

• Beating heart of the most iconic optical compressors ever made

• 8 DSP Presets, 8 Samples, and 3-Band AEQ
• Vocal Tune, Voiceover, and Loop Back
• 3.5mm Mic Input with 5V Phantom Power
• 3.5mm Line Input and Output Jacks
• 3.5mm Headphone Port

• Unbalanced 1/4" and XLR Inputs.
• Balanced XLR Output.
• Battery or Phantom Powered.

• 3-band stereo compressor for mixing and mastering
• FET compression reacts fast with a soft knee
• High-grade signal path all the way through, with impeccable left/right tracking across the full compression range
• Variable crossover frequencies, with mute and bypass switches for easy monitoring of each band
• Big and Air modes adds low-end body and high-end sparkle

• For Studio or Live Use.
• Single-Channel, FET-Style Compressor.
• Modelled on Classic 1176 Hardware.
• Adjustable Attack & Release Times.
• 4 Selectable Ratios & All Button Mode.

• Class-A Discrete Circuitry
• Balanced XLR Input/Output Connectors
• 12AX7 and 12AU7 Vacuum Tubes
• MIDAS Input/Output Transformers
• Switchable Frequency Selectors

• Stereo-to-Mono Direct Box
• Custom-Built Midas Transformer
• Passive Design, No Power Required
• L/R Adjustable Level Controls
• RCA and 3.5mm TRS Stereo Inputs

• Intuitive display, see your settings at a glance.
• Stompbox-style access to FX and controls
• Vocal, Guitar and Looping indicator colours (with back image)
• All the I/Os you need -including dedicated vocal PA and Guitar Out

• Active direct box and line balancing device
• Suitable for musicians, studios and PA companies
• Phantom or 9V battery powered
• Input attenuation is 0, -20 or -40dB
• Ground lift switch eliminates typical ground loop problems

• Connect Keyboards or Samplers to Mixers
• Connect Musical Instruments to Mixers
• Extended Dynamic Range
• Midas Sound Quality
• Compact and Rugged Construction