Recording




$
to
$



Drawmer SL22 1U - Stereo Speaker / Headphone Protector / Sound Level Limiter
You Pay: $1,269.00
Drawmer MXPro-60 Front End One Channel Strip with Multi-band Tube Saturation

Drawmer MXPro-60 Front End One Channel Strip with Multi-band Tube Saturation

  • Channel strip for studio and live sound
  • Switchable for mic, line, or instrument-level signals
  • Switchable 48V phantom power and phase reverse
  • Program-adaptive Gate, VCA compressor, De-esser, and EQ
  • Multiband "Tube Saturation" feature for subtle warming effects
  • Limiter on the output stage with a preset threshold (+16dB)
Special Order what does this mean?
You Pay: $1,599.00
Drawmer MC2.1 Desktop Monitor Controller

Drawmer MC2.1 Desktop Monitor Controller

  • Ultra-low noise and transparent circuit design
  • Linear power supply with low hum toroidal transformer and internal voltage selector switch
  • Three balanced stereo speaker outputs, plus a dedicated mono speaker/sub-woofer output
  • All outputs with individual L/R trims under unit to provide complete control over level matching
  • Timed relay protection on all speaker outputs to prevent power up/down thumps.
Special Order what does this mean?
You Pay: $1,269.00
Drawmer DL241B XLR 1U Dual Compressor/Limiter

Drawmer DL241B XLR 1U Dual Compressor/Limiter

  • 2 channel, 1 rack unit Auto/Manual Gate/Compressor/Limiter
  • Manual attack and release control
  • Proprietary "Programme Adaptive" soft gate (envelope follower)
  • Proprietary auto compressor with slope based attack and envelope following release
  • Zero overshoot limiter (+20dB)
  • Intergrated circuit VCA
  • Proprietary log level detector (not RMS)
Special Order what does this mean?
You Pay: $1,979.00
Drawmer DL241 1U Dual Compressor/Limiter Rackmount

Drawmer DL241 1U Dual Compressor/Limiter Rackmount

  • Dual channel
  • Compressor - Combines the smoothness of the 'Soft Knee' principle with the precision of a ratio control switchable for auto or manual control of Attack and Release times
  • Peak level-'Zero Response Time', 'Zero Overshoot' circuitry provides an absolute limit to the peak level of the output signal, adjustable from 0dB to +16dB above system level
Special Order what does this mean?
You Pay: $1,879.00
Drawmer CMC7 Compact Monitor Controller

Drawmer CMC7 Compact Monitor Controller

  • Compact 8-channel monitor controller
  • Ultra-low noise and transparent circuit design
  • Covers 5.1, 7.1, quadraphonic, DTS, Dolby Digital EX, THX Surround EX, DTS-HD, Dolby Atmos, and more
  • Large, ultra-precise volume knob supplies smooth volume changes
  • Stereo Mix switch enables you to check your surround mix in stereo
Special Order what does this mean?
You Pay: $1,269.00
Drawmer CMC3 Compact Monitor Controller

Drawmer CMC3 Compact Monitor Controller

  • Ultra-low noise and transparent circuit design
  • Source switches may be active in any combination
  • 4 inputs: SPDIF (192kHz/24Bit), 2 analog balanced 1/4" stereo, 3.5mm front-panel Aux jack
  • 3 pairs of speakers plus a mono sub may be switched individually and simultaneously or provide A/B comparisons
In Stock with Supplier Usually ships in 2 - 3 working days what does this mean?
You Pay: $1,259.00
Drawmer 1970 2-channel Microphone Preamp & Compressor

Drawmer 1970 2-channel Microphone Preamp & Compressor

  • Two THAT Corporation ultra clean mic pre's with 66dB of gain with phantom power and switchable mic impedance
  • Separate Line & Mic input XLR's
  • A pro quality instrument DI input with low and high EQ.
  • Can be used as 2 mono tracking compressors or 1 stereo buss compressor (avoiding image shifting)
  • FETs can be bypassed altogether to provide ultra clean outputs.
  • Standard controls such as Threshold, Ratio, Attack & Release, with 8 LED GR Metering on each band.
Usually ships in 2 - 3 weeks what does this mean?
You Pay: $2,799.00
Drawmer MCB Rack Mounting Kit

Drawmer MCB Rack Mounting Kit

  • Capable of Mounting Either MC2.1 or MC1.1
  • Rack Ears
  • High Quality Mounting Screws
  • Durable Metal Front Panel
  • Aux Cable
Special Order what does this mean?
You Pay: $309.00
Drawmer MC7.1 Surround Monitor Controller

Drawmer MC7.1 Surround Monitor Controller

  • Pristine, ultra low noise & transparent circuit design gives you an accurate representation of your mix whether it be surround or stereo.
  • Each of the eight 7.1 speakers can be cut or soloed individually.
  • Stereo outputs (including those mixed down from surround) can be monitored via the main stereo speaker outputs or the FL and FR from the surround speakers.
Special Order what does this mean?
You Pay: $2,899.00
Drawmer DL441 Quad Auto Compressor Limiter

Drawmer DL441 Quad Auto Compressor Limiter

  • Auto Attack and Release
  • Peak Level Limiter
  • Bypass
  • Stereo Linking
Special Order what does this mean?
You Pay: $2,349.00
Drawmer 1973 2U-3 Band Stereo FET Compressor

Drawmer 1973 2U-3 Band Stereo FET Compressor

  • 3-band stereo compressor for mixing and mastering
  • FET compression reacts fast with a soft knee
  • High-grade signal path all the way through, with impeccable left/right tracking across the full compression range
  • Variable crossover frequencies, with mute and bypass switches for easy monitoring of each band
  • Big and Air modes adds low-end body and high-end sparkle
In Stock with Supplier Usually ships in 2 - 3 working days what does this mean?
You Pay: $2,799.00
Drawmer 1968 MK11 Dual Channel Vacuum Tube Compressor

Drawmer 1968 MK11 Dual Channel Vacuum Tube Compressor

  • Switchable BIG and BIGGER control on each channel
  • Dual mono or true stereo link operation
  • Side chain access and side chain listen facility
  • VU metering of gain reduction and output levels
  • Switchable +10dB mode on VU re-scales the meter for users working at ‘hot’ output levels.
  • VU red warning glow to signify ‘approaching clipping’
Special Order what does this mean?
You Pay: $2,849.00
Drawmer DS201 Dual Noise Gate

Drawmer DS201 Dual Noise Gate

  • Variable high pass and low pass filters for "frequency conscious" gating
  • Comprehensive envelope control, attack, hold, decay, and range
  • Key input for external triggering
  • "Key listen" facility
  • Extremely fast attack time, to preserve the natural attack of the sound
  • Balanced inputs and outputs
Special Order what does this mean?
You Pay: $1,669.00
Drawmer DMS-6 D-Clock-R - Dual Redundant Clock Distribution

Drawmer DMS-6 D-Clock-R - Dual Redundant Clock Distribution

  • Dual Redundant Power Supply via 2 x universal voltage filtered mains power inlets for continuous operation & reliability
  • LCD Display with 3 sample rate measurement modes and accurate to 2ppm
  • Auto-Sensing Dual Redundant WordClock/AES3id BNC Inputs provide continuous operation and added dependability
Special Order what does this mean?
You Pay: $2,149.00
Drawmer 1978 Stereo Tone Shaping FET Compressor

Drawmer 1978 Stereo Tone Shaping FET Compressor

  • Fast Reacting Stereo FET Design compressor with excellent Left/Right Tracking across the Full Range of compression and in a 1u rack mount housing.
  • Threshold, Ratio, Attack and Release controls and Gain Reduction Metering provide familiar and intuative control over the audio. Anyone that knows how to use a compressor can operate the 1978.
In Stock with Supplier Usually ships in 2 - 3 working days what does this mean?
You Pay: $1,799.00
Drawmer 1976 Stereo Three Band Saturation and Width Processor

Drawmer 1976 Stereo Three Band Saturation and Width Processor

  • Powerful 3 Band all Analogue Saturation for adding warmth to both your digital and analogue sounds.
  • Designed to Inject character to your audio reminiscent of 1970's era gear and remove the sanitized harshness that digital recordings suffer from
Special Order what does this mean?
You Pay: $1,989.00
Drawmer 1974 Stereo Parametric Equalizer

Drawmer 1974 Stereo Parametric Equalizer

  • Vintage-style 4-band parametric equalization
  • Inspired by classic 1970s-era analog equipment
  • Delivers classic sonic clarity and control at an affordable price
  • Stereo operation with one set of controls for both channels
  • Accurate, indented potentiometers provide precision for quick and easy recall
Special Order what does this mean?
You Pay: $1,989.00
Drawmer 1960 2-channel Tube Microphone Preamp & Compressor

Drawmer 1960 2-channel Tube Microphone Preamp & Compressor

  • 2 Channel, 2 rack space vacuum tube compressor with mic/line/instrument preamp
  • Proprietary vacuum tube/FET based discrete VCA
  • Classic attack/release curvers used in vintage compressors
  • Auto ratio depending on signal attack slope (1:30 maximum)
Special Order what does this mean?
You Pay: $4,649.00
Drawmer SP2120 1U - Stereo Speaker Protector

Drawmer SP2120 1U - Stereo Speaker Protector

  • Key Holder access only.
  • Takes only minutes to install.
  • Tamper-Proof bracket (available separately) to lock-in the XLRs and conform to Local Authority regulations.
  • Dual 16 segment Left/Right bargraphs for ’at a glance’ level metering.
  • ’Protection’ processing 16 segment bargraph display.
Special Order what does this mean?
You Pay: $1,539.00
Drawmer MC3.1 Expanded Desktop Monitor Controller

Drawmer MC3.1 Expanded Desktop Monitor Controller

  • Ultra low noise and transparent circuit design.
  • Source switches for both Main & Cue can be active in any combination. 5 Inputs in Total - 1x Digital AES/SPDIF Neutrik XLR/JACK COMBI & 2 balanced analogue Neutrik XLR/JACK COMBI and 1 stereo RCA Analogue on the Rear Panel & 1 3.5mm Front Panel Aux.
  • 3x Speakers Plus a Mono Sub can be switched individually & simultaneously or give A/B comparisons. Each has level trims to provide precise channel matching.
Special Order what does this mean?
You Pay: $1,979.00
Drawmer MC1.1 Monitor/Headphone Pre-Amp

Drawmer MC1.1 Monitor/Headphone Pre-Amp

  • Ultra low noise and transparent circuit design.
  • Linear power supply with low hum toroidal transformer and internal voltage selector switch.
  • 3 Input Sources - Balanced XLR, MP3 Player 3.5mm Jack & Switchable Line/Phono (RIAA MM) RCA.
  • Two switchable output stages, Balanced XLR and RCA.
  • Mono Sub woofer output available simultaneous to balanced outs.
Special Order what does this mean?
You Pay: $1,079.00
Gravity GSAVARITILT Variable Speaker Tilt Adapter

Gravity GSAVARITILT Variable Speaker Tilt Adapter

  • Solid and durable construction
  • Ergonomic handling
  • Up to 15° speaker tilt adustable
Contact us for an ETA what does this mean?
You Pay: $52.95
Gravity Speaker Stand Replacement Knob M8 X 14mm

Gravity Speaker Stand Replacement Knob M8 X 14mm

  • Thread Length: 14mm
  • Thread Size: M8
  • Knob Diameter: 48mm
  • Rubberised Finish
Contact us for an ETA what does this mean?
You Pay: $5.95
Gravity Stands GSP 3332TPB Adjustable Two Part Speaker Pole 35mm to 35mm

Gravity Stands GSP 3332TPB Adjustable Two Part Speaker Pole 35mm to 35mm

  • 35 mm Pole for Mounting Speakers to Subwoofers
  • Powder Coating for Smooth Operation
  • Sturdy Steel Frame for Long Lasting Reliability
  • Transport Length of 54cm for Easy Portability
  • Includes Gravity G Ring Pack
Contact us for an ETA what does this mean?
You Pay: $66.95
Gravity GSP3102 Studio Monitor Speaker Stand

Gravity GSP3102 Studio Monitor Speaker Stand

  • Infinitely variable height adjustment
  • Tilt angle up to +/- 15°
  • 360° rotatable
  • EVA padded bearing surface
  • Anti-tip for the speaker
Contact us for an ETA what does this mean?
You Pay: $109.00
(2) reviews
Gravity Stands Transport Bag For Square Base Plate

Gravity Stands Transport Bag For Square Base Plate

  • Sturdy carrier bag made of 1680D ballistic nylon for the square base plate (563 x 563 mm).
  • For GLS331B and GLS431B base plates
  • 5 mm tough padding
  • See-through window for labels
  • YKK Zipper
Contact us for an ETA what does this mean?
You Pay: $40.95
Gravity Stands Transport Bag for 1 Large Speaker Stand

Gravity Stands Transport Bag for 1 Large Speaker Stand

  • Durable, water repellent 600D nylon shell
  • 10 mm foam padding
  • Dual zippers with single pull grip
  • Carry straps positioned for even weight distribution
  • Comfortable wrap-around handle
Contact us for an ETA what does this mean?
You Pay: $66.95
Gravity Touring Series Steel Speaker Stand

Gravity Touring Series Steel Speaker Stand

  • Ideal for rental and event organisers
  • Extremely robust steel construction
  • Double-braced legs
In stock Ships today
You Pay: $169.00
(2) reviews
Gravity Set of 2 Speaker and 2 Microphone Stands in Transport Bag

Gravity Set of 2 Speaker and 2 Microphone Stands in Transport Bag

  • Solid and durable stand construction
  • Strong and stable tripods
  • Interchangeable colour rings
Estimated stock due 5th of July what does this mean?
You Pay: $369.00
Gravity Tilt-and-Swivel Wall Mount (30kg)

Gravity Tilt-and-Swivel Wall Mount (30kg)

  • Supports up to 30KG Speaker Weight
  • Powder Coating for Smooth Operation and Smart Look
  • Sturdy Steel Frame for Long Lasting Reliability
Contact us for an ETA what does this mean?
You Pay: $159.00
Gravity Tilt-and-Swivel Wall Mount (20kg)

Gravity Tilt-and-Swivel Wall Mount (20kg)

  • Supports up to 20KG Speaker Weight
  • Powder Coating for Smooth Operation and Smart Look
  • Sturdy Steel Frame for Long Lasting Reliability
Special Order what does this mean?
You Pay: $149.00
Gravity Adjustable Speaker Pole with Crank

Gravity Adjustable Speaker Pole with Crank

  • 35 mm extension rod with M20 screw thread
  • Crank operation for easy raising and lowering of the speaker
  • Height-adjustable from 0.8 to 1.1 m
  • 40 kg load capacity
Contact us for an ETA what does this mean?
You Pay: $179.00
Gravity GH-PHTT01B Table-Top Headphones Stand

Gravity GH-PHTT01B Table-Top Headphones Stand

  • With base and pillar made of aluminum
  • Rubberized surface for up to two headphones
  • With two cable slots for in-ear headphones
Contact us for an ETA what does this mean?
You Pay: $45.95
(1) review
Gravity GSP5212B Speaker Stand

Gravity GSP5212B Speaker Stand

  • Solid durable construction
  • Heavy duty aluminium die-cast base
  • Lightweight construction
  • Interchangeable colour rings
Contact us for an ETA what does this mean?
You Pay: $99.95
Gravity GSP5211W 35mm Adjustable Speaker Stand with Tripod Base (White)

Gravity GSP5211W 35mm Adjustable Speaker Stand with Tripod Base (White)

  • For Heavy-Duty Loudspeakers
  • 106 to 195cm Height Adjustment
  • 50kg Load Capacity
  • Solid, Durable Aluminium Construction
  • Stable Aluminium Die-Cast Base
Contact us for an ETA what does this mean?
You Pay: $99.95
Gravity GSP5211GSB Speaker Stand with Gas Spring

Gravity GSP5211GSB Speaker Stand with Gas Spring

  • Comfortable height adjustment
  • Gas spring with 18 kg lifting force
  • Solid and durable
  • Stable aluminium die-cast base
  • Lightweight construction
In stock Ships today
You Pay: $149.00
Gravity SP3102TM Studio Monitor Stand with Table Clamp (Single)

Gravity SP3102TM Studio Monitor Stand with Table Clamp (Single)

  • Compact table clamp
  • Infinitely variable height adjustment
  • 360° rotatable
  • Up to +/- 15° tilt angle
  • EVA-padded surface
  • Anti-tipping protection for speakers
Contact us for an ETA what does this mean?
You Pay: $189.00
(1) review
Gravity GTSP2332B Touring Series Adjustable Touring Speaker Pole (35mm to M20, 1400mm)

Gravity GTSP2332B Touring Series Adjustable Touring Speaker Pole (35mm to M20, 1400mm)

  • Ideal for rental and event organisers
  • Solid and durable construction
  • Automatic LockPin®-technology
  • Ergonomic handling
  • Compact transportation
In stock Ships today
You Pay: $99.95
Gravity GRP5555YEL1 G-Ring Universal Ring Pack (Sunshine Yellow)

Gravity GRP5555YEL1 G-Ring Universal Ring Pack (Sunshine Yellow)

Universal Ring Pack suitable for all Gravity products.
Contact us for an ETA what does this mean?
You Pay: $11.95
Gravity GRP5555BLU2 G-Ring Universal Ring Pack (Deep Sky Blue)

Gravity GRP5555BLU2 G-Ring Universal Ring Pack (Deep Sky Blue)

Universal Ring Pack suitable for all Gravity products
Contact us for an ETA what does this mean?
You Pay: $11.95
Gravity GSS5211BSET1 Speaker Stand Pair with Carry Bag

Gravity GSS5211BSET1 Speaker Stand Pair with Carry Bag

Includes two tripod speaker stands and a padded heavy duty carry bag
On Backorder what does this mean?
You Pay: $269.00
(3) reviews
Gravity GRP5555RED1 G-Ring Universal Ring Pack (Lust Red)

Gravity GRP5555RED1 G-Ring Universal Ring Pack (Lust Red)

Universal Ring Pack suitable for all Gravity products
Contact us for an ETA what does this mean?
You Pay: $11.95
Gravity GSSPWBSET1 Speaker Stand with Round Base

Gravity GSSPWBSET1 Speaker Stand with Round Base

High quality speaker stand with a round cast iron base
Contact us for an ETA what does this mean?
You Pay: $179.00
Gravity GSAT36B Double Speaker Stand Adapter

Gravity GSAT36B Double Speaker Stand Adapter

Universal double speaker stand adapter
In stock Ships today
You Pay: $51.95
Gravity GSAFIXTILT5 5 Degree Speaker Tilt Adapter

Gravity GSAFIXTILT5 5 Degree Speaker Tilt Adapter

Allows a 5 degree extra tilt for 35mm speaker poles
Contact us for an ETA what does this mean?
You Pay: $16.95
Gravity GSP2332TPB Two-Part Speaker Distance Pole

Gravity GSP2332TPB Two-Part Speaker Distance Pole

Mount satellite speakers on subwoofers
Contact us for an ETA what does this mean?
You Pay: $72.95
Gravity GSP5211B Speaker Stand

Gravity GSP5211B Speaker Stand

Classic tripod speaker stand
In stock Ships today
You Pay: $94.95
Gravity GSP4722B Wind Up Speaker Stand

Gravity GSP4722B Wind Up Speaker Stand

Crank operation for easy speaker raising and lowering
In stock Ships today
You Pay: $259.00
Gravity SP 3202 VT Studio Monitor Speaker Stand (Single)

Gravity SP 3202 VT Studio Monitor Speaker Stand (Single)

  • Solid cast-iron base.
  • Steel tray with isolating foam rests.
  • Black powder coating.
  • 50 kg load capacity.
In stock Ships today
You Pay: $129.00

1 2 Next >