(no ratings yet) Thanks for your rating!
Genelec M040 Active Two-Way 6.5" Studio Monitor (Single, Black)Product #15485 | SKU M040AM |(no ratings yet) Thanks for your rating!
This black M040 Active Two-Way 6.5" Studio Monitor from Genelec offers a neutral and accurate reproduction of the source material, in a design that's committed to environmental sustainability. The cabinet of the M040 features rounded edges and a gently curved front and sides, which minimize edge diffraction and provide better imaging. It's made of a Natural Composite Enclosure, which is a compound of wood fiber and recyclable material. This is part of an initiative called Genelec Embedded Sustainability, where the products deliver a reduced carbon footprint, without sacrificing accuracy or performance. Another attribute which adds to the inherent sustainability of the M040 are its built-in class D amplifiers, which are more power efficient, lightweight, and have a cooler operation than the class A/B amplifiers that are typically used in active near-field monitors. Its 1" metal dome tweeter and 6.5" woofer are powered by 50-watt and 80-watt class D amplifiers, respectively. A feature called Intelligent Signal Sensing automatically puts the M040 into Standby mode, where it consumes less than 0.5 watts of power when an audio signal isn't present. When a signal is present, the M040 automatically powers on. A combo XLR and 1/4" TRS jack and an unbalanced RCA jack are provided for input. Room response controls optimize the EQ for bass and tabletop use. A dedicated Bass Control switch adjusts the response of even lower frequencies, to adapt the speaker to its environment. One position on the switch provides no bass EQ, for use when there is free space around the speaker. To compensate for surfaces near the speaker, the Bass Control switch enables you to roll off -2 or -4 dB.
- Laminar Integrated Port minimizes vibration and provides accurate low frequency response
- Advanced Directivity Controlled Waveguide provides a flat frequency response for on and off-axis listening positions
- Voltage is selected automatically, making it possible to use the M040 all over the world
- Three output level control settings: Very Low (-20 dB), Low (-10 dB), and High (0 dB)
- Designed by Harri Koskinen
||1x Combo XLR and 1/4" TRS
1x Unbalanced RCA
||48 Hz to 20 kHz (-3 dB)
||80W, Class D
||50W, Class D
|Low Frequency Driver
||6.5" (16.5 cm)
|High Frequency Driver
||1" (2.54 cm) metal dome tweeter
||Room Response Controls: Tabletop EQ, Bass EQ, Off
Bass Controls: Free Space (no EQ), -2 dB, -4 dB
Output Level Controls: Very Low (-20 dB), Low (-10 dB), and High (0 dB)
||Natural Composite Enclosure, recyclable fiber composite material, 50% Finnish wood
|Dimensions (H x W x D)
||13.27 x 9.25 x 9.02" (337 x 235 x 229 mm)
||15.4 lb (7.4 kg)