Tripod Accessories
SmallRig BSL2681 15mm LWS Universal Lens Support with 2.1" Vertical Adjustment
- Fits Standard 15mm LWS Rods.
- Y-Shaped Lens Support.
- Fits up to 150mm Lens Diameter.
- 2.1" Vertical Adjustment Range.
- Quick Release Knob Adjustment.
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$40.95
iFootage QL-I Quick Leveler
- Mount Camera Head onto Tripod
- Quick-Levelling Bowl, Flat Base
- Quick Release Latch Secures Bowl
- Bubble Level, 3/8"-16 Mounting Screw
In stock
Ships tomorrow
$159.00
You Pay:
$138.00
$159.00
SmallRig 2854 Mounting Plate for Zhiyun-Tech CRANE 3S Handheld Stabilizer
- Designed for ZHIYUN CRANE 3S Gimbal.
- 1/4"-20 & ARRI 3/8”-16 Accessory Mounts.
- Connects to Gimbal via a Captive 3/8”-16 Screw & Locating Pins.
- Compatible with Original Sling Handle Adapter and SmallRig Handle 2636.
- Integrated Protective Rubber Pad.
In stock
Ships tomorrow
$37.95
You Pay:
$14.00
$37.95
SmallRig 2814 Mount for LaCie Rugged SSD
- For LaCie Rugged SSD.
- Attaches to Cage With Two Captive 1/4”-20 Screws.
- Secures SSD & USB Type-C Cable.
- Thumbscrew Fastener.
In stock
Ships tomorrow
$56.95
You Pay:
$35.00
$56.95
Peak Design Ultralight Conversion Kit
- TPU Rubber Feet
- Material Grips & Dampens Vibrations
- Converts Travel Tripod to Ultralight
- Lower Aluminium Tripod Weight by 45%
- Lower Carbon Fibre Tripod Weight by 40%
In Stock
Usually ships in 2 - 3 working days
You Pay:
$57.95
SmallRig 2799 Mount for LaCie Portable SSD
- For LaCie Portable SSD.
- Attaches to Cage With Two Captive 1/4”-20 Screws.
- Secures SSD & USB Type-C Cable.
- Thumbscrew Fastener.
In stock
Ships tomorrow
$35.95
You Pay:
$14.00
$35.95
SmallRig 3860 L Bracket for Nikon Z 30
- Arca-Swiss Quick Release Plate
- Battery Door Hinge Arm
- Side Plate Cold Shoe Mount
- Strap Slots for Hand Strap
- Bulit-In Screwdriver
In stock
Ships tomorrow
$70.95
You Pay:
$47.00
$70.95
SmallRig 4211 Foldable L-Bracket for Canon EOS R8
- Arca-Swiss L-bracket, press-to-flip design
- Folded and stored as one portable piece
- Stretch the baseplate up to 20mm
In stock
Ships tomorrow
$129.00
You Pay:
$95.00
$129.00
Peak Design Travel Tripod Phone Mount
- Mounts to Peak Design Travel Tripods
- Holds Phones up to 8.9 cm Wide
- Can Be Stored in the Tripod's Column
- Held in Place via Magnet
In Stock
Usually ships in 2 - 3 working days
You Pay:
$35.95
You Pay:
$9.95
You Pay:
$40.95
Manfrotto 131D - Repro Arm for Tripods (Black)
Allows the positioning of two heads on a 90 degree perpendicular angle
In stock
Ships in 1 - 2 working days
You Pay:
$229.00
Leofoto SF-02 Lens Foot with Clamp for Sony FE 200-600mm f/5.6-6.3 G OSS Lens
- For Sony FAE 200-600mm G OSS Lens
- Arca-Type Compatible
- Replaces Original Foot of Lens
- Black Anodised 6061-T6 Aluminium
- QD Socket, Safety-Stop Screws
In stock
Ships tomorrow
You Pay:
$179.00
SmallRig 2122 L-Bracket for Sony A7RIII/A7III/A9
L-Bracket comprised of base and side plate provide more comfortable grip
In Stock with Supplier
Usually ships in 2 - 4 weeks
$106.00
You Pay:
$95.00
$106.00
SmallRig 4160 L-Bracket for Canon EOS R6 Mark II / R5 / R5 C / R6
- Arca-Swiss quick-release plates
- Accessory mounting points
- Stretchable side plate
- Built-in magnetic wrench
In stock
Ships tomorrow
You Pay:
$87.95
Leofoto LB-60N Levelling Base with Butterfly Handle with 60mm Plate
- Load Capacity: 15 kg
- Adjustment Range: +/- 15°
- Half-Ball Type Levelling Capability
- 3/8"-16 Threaded Base Mount
- 3/8"-16 Tripod Mount Stud
In stock
Ships tomorrow
You Pay:
$139.00
Manfrotto MOVE Quick Release Catcher System Set
- Load Capacity: 20kg
- Base Diameter: 60mm
- Weight: 220g
- 3/8"-16 Threaded Base Mount
- Twist-Lock Mechanism
In stock
Ships tomorrow
You Pay:
$207.00
Sunwayfoto PCL-R8 L-Bracket for Canon EOS R8
- Dedicated L-bracket for EOS R8
- Model: PCL-R8
- Length: 101mm
- Width: 39mm
- Height: 77mm
- Net Weight: 87.7g
In stock with supplier
Usually ships in 2 - 3 working days
$82.00
You Pay:
$80.95
$82.00
Sirui TY-110L Universal L-Bracket
- Universal for DSLR & Mirrorless Cameras
- Arca-Type Compatible
- Mounts Vertically and Horizontally
- Retains Access to the Camera's Ports
- Aluminium Constructed
In Stock with Supplier
Usually ships in 2 - 3 working days
$105.00
You Pay:
$94.95
$105.00
Peak Design Universal Head Adapter
- Instals onto the Travel Tripod's Legs
- Allows Use of Any 3rd-Party Tripod Head
- Head Secures to Adapter with Set Screws
- 3/8"-16 Threaded Head Mount
- Instals with Included Hex Wrench
In stock
Ships tomorrow
You Pay:
$60.95
iFootage MA5-6 Spider Crab Magic Arm
- Safe, Secure & Rapid Deployment
- Toolless Technology
- Quick Release Head
- Anti-Slip Gearing
In stock
Ships tomorrow
You Pay:
$199.00
Leofoto LB-75 Levelling Base with Butterfly Handle with 75mm Plate
- Load Capacity: 25 kg (55.1 lb)
- Adjustment Range: +/- 15°
- Half-Ball Type Leveling Capability
- 3/8"-16 Threaded Base Mount
- 3/8"-16 Tripod Mount Stud
In stock
Ships tomorrow
You Pay:
$179.00
SmallRig 4136 L-Shape Grip for FUJIFILM X-T5
- Multiple Accessory Mounts
- Slim & Compact Baseplate
- Matches FUJIFILM F2 Perfectly
- AluminIum Alloy, Silicone
In stock
Ships tomorrow
You Pay:
$71.95
Leofoto LB-65 Levelling Base with Butterfly Handle with 65mm Plate
- Load Capacity: 39.7 lb
- Adjustment Range: +/- 15°
- Half-Ball Type Levelling Capability
- 3/8"-16 Threaded Base Mount
- 3/8"-16 Tripod Mount Stud
In stock
Ships tomorrow
You Pay:
$149.00
Leofoto SF-01 Lens Foot for Sony 70-200gm FE70-200mmF2.8 GM & FE 100-400 f/4.5-5.6 GM OSS
- Made from Machined 6061-T6 Aluminium
- Replaces the Sony Lens Collar Foot
In stock
Ships direct tomorrow
You Pay:
$149.00
Leofoto AM-4 Magic Versa Arm Multi-Purpose Tripod Accessory Mount
- Load Capacity: 3 kg
- Arm Length: 24 cm
- Folded Length: 13.7 cm
- Weight: 166 g
- 1/4"-20 Mounting Stud on Each End
In stock
Ships direct tomorrow
You Pay:
$99.95
SmallRig 4514 Dedicated L Bracket for FujiFilm GFX100 II
- Arca-type baseplate and side plate
- Locked via one 1/4"-20 screw
- Two different setups
- Multifunctional and compatible
In stock
Ships tomorrow
You Pay:
$139.00
Leofoto Nato Picatinny Dovetail Adapter GS-1
- For use with ARCA mounting plates.
In stock
Ships direct tomorrow
You Pay:
$79.95
Tamron A035TM Tripod Mount for 100-400mm f/4.5-6.3 Di VC USD Lens
- Optional Tripod Mount
- Arca-Type Compatible
- Single Dovetail Design
In stock
Ships in 1 - 2 working days
You Pay:
$269.00
iFootage MA3-4 Spider Crab Magic Arm
- Safe, Secure & Rapid Deployment
- Toolless Technology
- Quick Release Head
- Anti-Slip Gearing
In stock
Ships tomorrow
You Pay:
$163.00
Manfrotto Gim-Pod Accesssory Leg Set for Gimboom
- Converts Gimboom to Tripod
- Load Capacity: 6.5 kg
- Quick-and-Easy Attachment
- Folded Length: 46 cm
- Lightweight, Durable Aluminium 2-Leg Set
In stock
Ships in 1 - 2 working days
You Pay:
$183.00
Manfrotto 208 - Platform Adapter for Camera Mounting
Provides a mounting plate with a 3/8 inch screw.
In stock
Ships tomorrow
You Pay:
$51.95
Joby Vertical L Bracket for Compact Mirrorless Cameras
- For Landscape & Portrait Shooting
- Utilises the 3K Plate from GorillaPod® 3K
- Two Bubble Levels
- Integrated Cold Shoe Mount
- ¼-20” Mount
In stock
Ships tomorrow
You Pay:
$52.95
Leofoto Tripod Spiked Foot (x3)
- 3/8"-16 Thread Sockets
- Made of Stainless Steel
In stock
Ships direct tomorrow
You Pay:
$87.95
Manfrotto 3/8"-16 Quick Release Plate Screws (2-pack)
- Replacement Part
- Quick Release Plate Screws
- Designed for 501 and 503 Pro Videos Heads
In stock
Ships tomorrow
You Pay:
$18.95
Leofoto BC-02 Binocular Adapter Mount
- Adapts binoculars or spotting scope to Leofoto tripods
- Mounts on tripod or horizontal centre column
- Clampable range: 28-60mm
- Weight: 200g
In stock
Ships direct tomorrow
You Pay:
$99.95
Leofoto UC-01 Umbrella Clamp
- For attaching umbrellas and other items to your tripod.
- Dimensions: 80 mm x 160 mm
- Mounting screw/hole:1/4"-16 x 2
- Max Load: 3.0 kg
- Weight: 223 g
In stock
Ships direct tomorrow
You Pay:
$129.00
Leofoto AM-3 Versa Arm with Anti-Twist Adapters
- Extended Dimensions: 200 mm
- Folded Dimensions: 110 mm
- Moutning stud: UNC 3/8”-16 or a 1/4"-16
- Max Load: 6.6 lb / 3.0 kg
- Weight: 198g
In stock
Ships direct tomorrow
You Pay:
$119.00
SmallRig x LensVid MD4360 mini L-Shaped Mount Plate Kit
- 90° angle equipment installation
- Built-in 1/4”-20 screws
- Built-in anti-slip silicone pads
- 1.2kg load capacity
In stock
Ships tomorrow
You Pay:
$54.95
Manfrotto 190XSCC Shorter Center Column for Select 190 Series Tripods
- Shorter Than Stock Column
- 3/8"-16 Mounting Thread
- Bubble Level
In stock
Ships in 1 - 2 working days
You Pay:
$169.00
Leofoto AM-4 Versa Arm with Anti-Twist Adaptors
- Extended Dimensions: 292 mm
- Folded Dimensions: 155 mm
- Moutning stud: UNC1/4"-16
- Max Load: 6.6 lb / 3.0 kg
- Weight: 5.85 oz / 166g
In stock
Ships direct tomorrow
You Pay:
$129.00
Leofoto MC-40 Multi Clamp
- Locking Dimensions: 13-35 mm
- Folded Dimensions: 54 mm x 78 mm
- Moutning Hole: 1/4"-16, 3/8”-16
- Max Load: 6.6 lb / 3.0 kg
- Weight: 105.5g
In stock
Ships tomorrow
You Pay:
$65.95
You Pay:
$12.95
Sirui LE-60 Leveling Base
- Load Capacity: 15 kg
- Swivel up to 15° in Any Direction
- Use Heads with 3/8" or 1/4" Mounts
- Use on Tripod/Monopods with 3/8" Studs
- Off-Set Bubble Level
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$160.00
TetherBLOCK MC Multi Cable Mounting Plate
- Prevent Accidental Removal of Data Cable.
- Prevents Damage to USB/FireWire Ports.
- Fits 1/4"-20 and 3/8" Tripod Mounts.
- Accepts Thin, Medium, and Thick Cables.
- Built from Aircraft Quality Aluminium.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$199.00
Manfrotto 166 Tripod Utility Apron
- Replaces #3146
- 3 compartments hang
- Leather belt attachments adjust to most tripod leg diameters
- Allows for storage space beneath center column
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$149.00
Really Right Stuff MC-LS Universal L-Bracket
- Adjustable to Fit Almost Any Camera
- Sliding L-Component Adapts to Body Size
- Arca-Type Compatible on Each Axis
- Precision CNC-Machined Aluminium
- Anti-Twist Flange Plate
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$349.00
Really Right Stuff L-Plate Set for Canon EOS R5
- For Canon EOS R5 / R6 Mirrorless Cameras
- Arca-Type Compatible Dovetail Mount
- One-Piece Design L-Bracket
- Quick Release Function on Both Axes
- Maintains Port Door Access
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$469.00
Sirui HA-77 Horizontal Arm
- 50 to 77 cm Telescoping Cross Arm
- Load Capacity: 5 kg
- Mount Camera Perpendicular to Tripod
- Use as Miniature Camera Boom
- Swivel 360°, Tilt 90° Up or Down
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$219.00
SmallRig L-Bracket for Nikon Z 5/Z 6/Z 7 Cameras
- Arca-Type Compatible Dovetail Mount
- Quick Release Function on Both Axes
- Anti-Twist Design and Rubber pad
- 1/4"-20 Threaded Holes for Accessories
- Maintains Access to Camera Battery
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$75.00
NiSi NLP-S Adjustable L-Bracket for Select Nikon and Sony Cameras
- Adjustable Short Edge for Custom Fit
- Arca-Type Dovetail on Each Axes
- Stainless Steel 1/4"-20 Camera Screw
- Allen Wrench with Magnetic Storage
- Rubberised Padded Camera Platform
- Aircraft Grade Aluminium Construction
In Stock with supplier
Usually ships in 4 - 5 working days
You Pay:
$75.95
NiSi NLP-C Adjustable L-Bracket for Select Canon, FUJIFILM, Nikon, and Sony Cameras
- Adjustable Short Edge for Custom Fit
- Arca-Type Dovetail on Each Axes
- Stainless Steel 1/4"-20 Camera Screw
- Allen Wrench with Magnetic Storage
- Rubberised Padded Camera Platform
- Aircraft Grade Aluminium Construction
In Stock with supplier
Usually ships in 4 - 5 working days
You Pay:
$75.95
SmallRig 4137 L-Bracket for FUJIFILM X-T5
- Aluminium Alloy, Blackwood
- Arca-Swiss Quick Release Plate
- 1/4"-20 Threaded Holes
- 3/8"-16 Threaded Holes
- QD Port
- Includes Shutter Button
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$94.95
Really Right Stuff Leica Q2 L-Plate with Grip
- For Leica Q2
- Solid One-Piece Design
- Arca-Type Compatible Dovetail Mount
- Quick Release Function on Both Axes
- Ergonomic Extended Grip
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$539.00
Benro BLB1 Universal Camera L-Bracket
- Improves camera stability in portrait mode
- Quick repositioning from landscape to portrait
- Provides protection to your camera
- Solid aluminium construction
- 3-way locking 1/4” screw thread
- Arca-compatible
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$83.95
Really Right Stuff Modular L-Plate Set for Nikon Z9
- Arca-Type Compatible Dovetail Mounts
- Modular Design, Base Plate & L-Component
- Quick Release Function on Each Axis
- Maintains Ports and Battery Door Access
- Type II Black Anodized 6061-T6 Aluminum
- Laser-Engraved Center Marks
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$659.00
Really Right Stuff Ultralight L-Plate for Nikon D850
- Low-Profile and Ultralight Design
- Fixed L-Plate with One QD Socket
- Arca-Type Compatible Dovetail Plate
- Quick Release Function on Both Axes
- Maintains Ports and Battery Door Access
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$389.00
Tether Tools Rock Solid 4-Head Tripod Cross Bar
Compatible with Tether Table Aero, Supports a Custom Workstation, Four Head Mounts, 3/8"-16 Tripod Mounting Thread, Includes Custom Fit Case
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$279.00
3 Legged Thing Ollie L-Bracket for OM System OM-1 Mirrorless Camera (Darkness/Matte Black)
- For OM System OM-1 Mirrorless Camera
- Arca-Type Compatible Mount on Each Axis
- Expandable Base Length: 3.5 to 4.4"
- Magnesium Alloy Construction
- Battery Door and Side Port Access
- Vertical Aspect Cut-Out for Flip Screen
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$279.00
3 Legged Thing Ollie L-Bracket for OM System OM-1 Mirrorless Camera (Copper)
- For OM System OM-1 Mirrorless Camera
- Arca-Type Compatible Mount on Each Axis
- Expandable Base Length: 3.5 to 4.4"
- Magnesium Alloy Construction
- Battery Door and Side Port Access
- Vertical Aspect Cut-Out for Flip Screen
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$279.00
SmallRig Foldable L-Shape Mount Plate for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III
- Arca-Swiss L-bracket with press-to-flip design
- Under Horizontal shooting
- Folded and stored as one portable piece of accessory
- Stretch the baseplate in vertical shooting to allow cables
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$129.00
Leofoto LB-75S Levelling Base with Butterfly Handle with 75mm Plate and 70mm System Base Mount
- Load Capacity: 25 kg (55.1 lb)
- Adjustment Range: +/- 15°
- Half-Ball Type Levelling Capability
- 70mm Collar System Base
- 3/8"-16 Tripod Mount Stud
In stock
Ships direct tomorrow
You Pay:
$189.00
Really Right Stuff Modular L-Plate Set for Nikon Z8
- Arca-Type Compatible Dovetail Mounts
- Modular Design, Base Plate & L-Component
- Quick Release Function on Each Axis
- Maintains Ports and Battery Door Access
- Type II Black Anodised 6061-T6 Aluminium
- Laser-Engraved Centre Marks
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$509.00
Tether Tools Rock Solid 2-Head Cross Bar Side Arm
Compatible with Rock Solid Cross Bar, Enables "T" Setup for Adjusting Height, Provides 61cm of Vertical Movement, Features Two Mounting Points
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$169.00
Manfrotto 131DDB - Accessory Arm for Four Heads
- Replaces #3153B
- Accessory arm for four heads
- With 3/8" screws
In stock
Ships in 1 - 2 working days
You Pay:
$369.00
Manfrotto 230 Tripod Snow Shoe Set
- Set of 3
- 14 cm diameter
- Attach easily
- Provide necessary stability
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
TetherBLOCK QR Plus Quick Release Plate (Thunder Gray)
- Arca-Type Plate for Tethered Photography.
- Adapts Camera to Arca-Type Clamps.
- Integrates with Tethering Data Cable.
- Prevents Damage to Camera Data Port.
- Grooves Secure Cable under Camera.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$199.00
Tether Tools StrapMoore
Attaches to Tripod, Beam, Pole & More, Interior Two-Leg Adjustable Straps, Adjustable Object Strap, Heavy-Duty GripperElastic Lining
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$46.95
Leofoto QDM-1 1/4" Screw for Push Button Quick Detach Strap
Adapts Leofoto quick release straps to Ranger LS and Urban LX tripods and tripods with 1/4" mounting threads
In Stock with Supplier
Usually ships in 3 - 4 working days
You Pay:
$17.95
Manfrotto Quick Release Plate for Sony Alpha a9 and a7 Series Cameras
The camera plate is dual compatible with Manfrotto RC2 and Arca-type quick release systems.
In Stock
Usually ships in 2 - 3 working days
You Pay:
$70.95
NiSi NLP-SG Adjustable L-Bracket for Select Canon and Sony Cameras with Flip Out Screens
- Adjustable Short Edge for Custom Fit
- Arca-Type Dovetail on Each Axes
- Stainless Steel 1/4"-20 Camera Screw
- Allen Wrench with Magnetic Storage
- Rubberised Padded Camera Platform
- Aircraft Grade Aluminium Construction
In Stock with supplier
Usually ships in 4 - 5 working days
You Pay:
$75.95
Manfrotto RC4 L Bracket
- Horizontal/Vertical Position Change
- Lightweight Magnesium Alloy Construction
- Built-in 410PL Type Quick Release Plates
In stock
Ships in 1 - 2 working days
You Pay:
$379.00
Leofoto Rock Claw TF-02 Titanium Tripod Foot
- Scalloped edges bite
- Corrosion resistant
In stock
Ships direct tomorrow
You Pay:
$199.00
Manfrotto 60mm Short Half Ball
A video accessory that comes complete with a short locking handle to mount all Manfrotto flat-base heads to any 60mm bowl tripod.
In stock
Ships in 1 - 2 working days
You Pay:
$199.00
Manfrotto Suction Cups/Retractable Spike Feet (204SCK3)
- For the 055CX3 & 055CXPRO3 Tripods
- Set of three
- Rubber Feet
- Suction cups increase stability
In stock
Ships in 1 - 2 working days
You Pay:
$129.00
SmallRig L-Bracket for Sony A7R IV
- Form-fitting and dedicated L-Bracket.
- Arca compatible base plate and side plate.
- Multiple 1/4’’-20 threaded holes.
- Built-in flat screwdriver on the side plate.
- Soft leather pad on the grip for added comfort.
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$109.00
Manfrotto 120 - Tripod Adapter
Converts tripod head screw from 3/8' to 1/4'
In Stock
Usually ships in 2 - 3 working days
You Pay:
$62.95
SmallRig 3660B L-Bracket for Sony Alpha 7R V / 7 IV / 7S III / Alpha 1 / 7R IV / 9 II
- Arca-Swiss quick-release bottom plate
- Embedded select genuine leather
- Multiple mounting points
- Stretchable side plate
In stock
Ships tomorrow
You Pay:
$87.95
Manfrotto 208 - Camera Mounting Adapter with Hexagonal Pin
Provides a mounting plate with a 3/8 receptor and provides more grip
In Stock
Usually ships in 2 - 3 working days
You Pay:
$62.95
You Pay:
$17.95
Sachtler aktiv Slider to 75mm Tripod Adapter
- Adapts Slider to aktiv 75mm Bowl Tripod
- ForTripod with aktiv Bowl Connector
- Includes Sideload Platform
- Bubble Level, Lever, Safety Release
In stock
Ships in 1 - 2 working days
You Pay:
$1,229.00
3 Legged Thing Big Bootz Tripod Boots for Larger Tripods (3-Pack)
- For Tripods with a 1/4"-20 or 3/8"-16 Thread
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$62.95
Leofoto YB-75LC Leveling Base
- Ball diameter: 75mm
- Height: 174mm
- Max load: 20kg
- Weight: 382g
- ARCA Swiss Compatible
In stock
Ships direct tomorrow
You Pay:
$209.00
Leofoto AM-3 Magic Versa Arm Multi-Purpose Tripod Accessory Mount
- Load Capacity: 3 kg (6.6 lb)
- Arm Length: 17 cm (6.7")
- Folded Length: 9 cm (3.5")
- Weight: 126 g (4.44 oz)
- 1/4"-20 Mounting Stud on Each End
In stock
Ships direct tomorrow
You Pay:
$89.95
Leofoto QDM-2 3/8" Screw for Push Button Quick Detach Strap
Adapts Leofoto quick release straps to Summit LM tripods and all tripods with 3/8" mounting threads
In Stock with Supplier
Usually ships in 3 - 4 working days
You Pay:
$25.95
Sirui VP-SH15 Quick Release Plate for SH15 & SH25
- For Sirui VH-15 or VH-25 Video Head
- 1/4"-20 &3/8"-16 Screws, Locating Pin
- Aluminium with Nonslip Pads
- Rubber Plug Prevents Screw Loss
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$31.95
Manfrotto MOVE Quick Release Catcher System Base
- For MOVE Quick Release Catcher System
- Load Capacity: 20kg
- Base Diameter: 60mm
- Weight: 180g
- 3/8"-16 Threaded Base Mount
In stock
Ships in 1 - 2 working days
You Pay:
$189.00
Tether Tools Rock Solid Aero Tripod Roller System
Universal Dolly to Fit Most Tripods, 15kg Load Capacity, Rubber-Cushioned 7.6cm Wheels, Individual Wheel Brakes
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
3 Legged Thing Alfie L-Bracket for Select Sony Mirrorless Cameras (Copper)
- Arca-Type Compatible Mount on Each Axis
- Expandable Base Length: 4.1 to 4.5"
- Magnesium Alloy Construction
- Battery Door and Side Port Access
- Vertical Aspect Cut-Out for Flip Screen
- Weight-Saving Cutout Design
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$309.00
Manfrotto Set of Two 1/4" Camera Mounting Screws
- Replacement 1/4" Screws
- Select Manfrotto Quick Release Plates
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$32.95
Really Right Stuff 6" Multi-Purpose Rail (1/4"-20)
- Arca-Type Compatible
- Double Dovetail Design
- Includes 2x 1/4"-20 Screws
- For Some Medium and Large Format Cameras
- Used as a Lens Foot Plate
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$199.00
Really Right Stuff BX1D Base Plate for Hasselblad X1D
- For Hasselblad X1D-50c Camera
- Arca-Type Compatible Dovetail Mount
- Modular Design, Optional L-Component
- Maintains Access to Battery Door
- Anodised 6061-T6 Aluminium
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$279.00
3 Legged Thing Ollie L-Bracket for OM System OM-1 Mirrorless Camera (Grey)
- For OM System OM-1 Mirrorless Camera
- Arca-Type Compatible Mount on Each Axis
- Expandable Base Length: 3.5 to 4.4"
- Magnesium Alloy Construction
- Battery Door and Side Port Access
- Vertical Aspect Cut-Out for Flip Screen
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$279.00
Sirui RX-66C Carbon Fibre Centre Column for RX Tripods
- Suitable for the SIRUI RX series
- Easily swapped for the RX mounting ball
- Assembly tool integrated into the weight hook
- Reversible for overhead shots
- For cameras and equipment with 1/4 or 3/8 inch thread
- Locking screw in mounting plate
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$89.95
Leofoto YB-75LK Levelling Base
- Ball diameter: 75mm
- Height: 174mm
- Max load: 20kg
- Weight: 382g
- ARCA Swiss Compatible
In stock
Ships direct tomorrow
You Pay:
$179.00
Manfrotto 427B-4 Telescopic Operating Pole (1.4-4 m)
- Four aluminium sections
- Three risers
- 4 m maximum length
- Twist locking function
- Helps untangle ropes
In stock
Ships in 1 - 2 working days
You Pay:
$739.00
Leofoto LBQ-60S 60mm Leveling Base
- Anti-twist safety screws design
- Base diameter: for Mr. Q Tripod
- Top diameter: 60mm
- Height: 60mm
In stock
Ships direct tomorrow
You Pay:
$159.00
Leofoto LBQ-50S 55mm Leveling Base
- Anti-twist safety screws design
- Base diameter: for Mr. Q Tripod
- Top diameter: 55mm
- Height: 55mm
In stock
Ships direct tomorrow
You Pay:
$149.00
Tamron A011TL Long-Type Tripod Mount Ring
- Extended Base Surface
- Second Mounting Thread
- Ergonomic Grip
- Knurled finger grooves
In stock
Ships in 1 - 2 working days
You Pay:
$259.00
Sachtler aktiv Bowl Connector 75mm Bowl Tripod (V2)
Sachtler aktiv Bowl Connector 75mm Bowl Tripod (V2)
In stock
Ships in 1 - 2 working days
You Pay:
$259.00
Sachtler aktiv Bowl Connector V2 for Select 100mm Bowl Tripods
- Connect aktiv 100mm Head to 100mm Tripod
- For aktiv 100mm SpeedSwap Fluid Head
- For 100mm Bowl Tripod or Support
In stock
Ships in 1 - 2 working days
You Pay:
$299.00
Sachtler aktiv Head to Slider Carriage Adapter
- Mount aktiv 100mm Head on 3/8"-16" Stud
- For aktiv 100mm SpeedSwap Fluid Head
- For 3/8"-16" Slider or Support Stud
- Removable Stud Fits 3/8"-16 Thread
In stock
Ships in 1 - 2 working days
You Pay:
$255.00
Sachtler 75mm Tiedown
- For Ace & Other 75mm Tripod Heads
- Secures Head to Tripod or Hi-Hat
- For 75mm Ball Base
- Long, Triangular Design
In stock
Ships in 1 - 2 working days
You Pay:
$159.00
Gitzo L-Bracket for Sony a7R III and a9
- Incredibly lightweight full solid aluminium body
- Designed for Sony α7R III and α9 cameras
- Easy access to all cable ports even in portrait position
- Four strap attachment points for comfortable transportation
- Dedicated housing for hex key
In stock
Ships in 1 - 2 working days
You Pay:
$399.00
Gitzo G-065 Monitor Platform
Supports supplementary equipment, such as monitors, mixers, tape recorders and projectors
In stock
Ships in 1 - 2 working days
You Pay:
$229.00
Leofoto YB-75LP Leveling Base
- Ball diameter: 75mm
- Height: 174mm
- Max load: 20kg
- Weight: 382g
- ARCA Swiss Compatible
In stock
Ships direct tomorrow
You Pay:
$149.00
Benro LPSA7 L-Bracket for Sony a7/a7R
- For Sony a7mkII and a7RmkII
- More stable than ever
- Anti-abrasion Aerometal material
- Lightweight
- Arca-Swiss type mount
In stock
Ships direct tomorrow
You Pay:
$269.00
Ulanzi R105 L-Bracket for Sony ZV-1F/ZV-1 II (Black)
- Dedicated Grip for Sony ZV-1F / ZV-1 II
- Eight 1/4"-20 Thread Mounts
In stock
Ships tomorrow
You Pay:
$54.95
You Pay:
$35.95
3 Legged Thing Lexie Universal Multifunction L-Bracket (Copper)
- Arca-Type Compatible on Each Axis
- Vertical and Horizontal Mounting
- Extendable Base and Reversible Upright
- Access to Battery, Memory Card & Ports
- Access to LCD Screen, Strap Lug & Ports
- Multiple 1/4"-20 Accessory Mounts
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$159.00
SmallRig 4203 Dedicated L Bracket for FujiFilm GFX100 II with VG-GFX100ll Battery Grip
- Arca-type baseplate and side plate
- Locked via one 1/4"-20 screw
- Two different setups
- The side plate stretches 18mm
- Multifunctional and compatible
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$139.00
Really Right Stuff Multiuse Fore-Aft Plate
- Universal Plate with a 1/4"-20 Screw
- Arca-Type Compatible Dovetail Plate
- Compatible with Most Camera Bodies
- Fits Collared Telephoto Tripod Feet
- Provides Quick Release Functionality
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$149.00
PortaBrace Tripod-Carrying Shoulder Strap
- 3" Wide, Waterproof Nylon Construction
- Comfortable Foam Core
- Anti-Skid Material on Strap Bottom
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Oben QR-20 Quick Release Plate
- Replacement for Oben Ball Head Models BE-117, BE-117T, BE-126, BE-126T, BC-126, BB-1, BB-1T, BC-1 & BC-1T
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$63.95
Tether Tools TetherArca Cable Spacer
- For Arca-Type L-Brackets
- Secures Multiple Cables at a Time
- Cable Locking Cable Bar Design
- Lightweight and Low-Profile Design
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$139.00
Manfrotto 200LT-PL-PRO Technopolymer RC2/Arca Quick Release Plate
- Ultra-lightweight and compact photo plate
- Compatible with RC2 & Arca-type head attachments
- High-quality technopolymer construction
- Two rubber inserts maximise grip on the most angled shots
- Universal 1/4'' screw attachment
In Stock
Usually ships in 2 - 3 working days
You Pay:
$62.95
NiSi NLP-CG Adjustable L-Bracket for Select Canon and FUJIFILM Cameras with Flip Out Screens
- Adjustable Short Edge for Custom Fit
- Arca-Type Dovetail on Each Axes
- Stainless Steel 1/4"-20 Camera Screw
- Allen Wrench with Magnetic Storage
- Rubberised Padded Camera Platform
- Aircraft Grade Aluminium Construction
In Stock with supplier
Usually ships in 4 - 5 working days
You Pay:
$75.95
3 Legged Thing BASE70 Arca-Swiss Compatible 70mm Wide Quick Release Plate (Copper/Orange)
- Arca-Type Compatible
- 1/4"-20 Stainless Steel Camera Screw
- Adjustable Camera Screw Channel
- Rubberised Anti-Twist Surface
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$81.95
Leofoto AM-1L Versa Arm
- Adapts accessories to Leofoto tripods
- Length: 190mm
- Weight: 98g
- Max. Load: 1.5kg
In Stock with Supplier
Usually ships in 3 - 4 working days
You Pay:
$67.95
Peak Design Travel Tripod Tool Kit
- 2.5 and 4mm Hex Wrench Sizes
- Hex Wrench Folds Compact
- Remove Centre Column
- Remove Ball Head Pins
- Instal Universal Head Adapter
In Stock
Usually ships in 2 - 3 working days
You Pay:
$36.95
Really Right Stuff Stainless Steel Reducer Bushing (3/8"-16 to 1/4"-20)
- Reduces 3/8"-16 Thread Down to 1/4"-20
- Durable Stainless Steel Bushing
- Flathead Screwdriver Slot for Removal
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$16.95
Manfrotto MOVE Quick Release Gimboom Leveling Plate
- For MOVE Quick Release Catcher System
- Adjustment Range: +/- 15°
- Accessory Size Diameter: 5cm
- Accessory Size Height: 3.5cm
- Weight: 70 g
In Stock
Usually ships in 2 - 3 working days
You Pay:
$66.95
Leofoto LHC-60+NP-60 Screw-Knob Clamp
Can be used with LB-60N or LB-65 Leveling Head
In Stock with Supplier
Usually ships in 3 - 4 working days
You Pay:
$54.95
Leofoto HK-01 Tripod Weight Hook
- For Leofoto Ranger LS Tripods
In Stock with Supplier
Usually ships in 3 - 4 working days
You Pay:
$30.95
3 Legged Thing ZAYLA PD L-Bracket for Nikon Z 50 (Metallic Slate Gray)
- Designed for Nikon Z 50 Camera
- Vertical and Horizontal Mounting
- 1/4"-20 Threaded Camera Mount
- Milled from Single Block of Aluminium
- Arca-Type Compatible
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$94.95
Leofoto AM-1 Versa Arm
- Adapts accessories to Leofoto tripods
- Length: 112mm
- Weight: 53g
- Max. Load: 1.5kg
In Stock with Supplier
Usually ships in 3 - 4 working days
You Pay:
$47.95
Leofoto QDC-36 36mm Tripod Clasp for Push Button Quick Detach Strap
Lets you to attach tripods with 36mm diameter legs to your Leofoto Quick Detach Strap
In Stock with Supplier
Usually ships in 3 - 4 working days
You Pay:
$46.95
Tether Tools TetherArca Onsite Relay
- Standard 1/4″-20 thread for securing ONsite Relay C, or any 1/4″-20 accessory
- Connect to any compatible L-Brackets, Arca plates, rails or rigs
- Captive screw design to adjust accessories at any angle
- Included 1/4″-20 female thread for added mounting versatility
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$57.95
3 Legged Thing Stubz Short Centre Column
- Short Centre Column
- Length: 10cm
- Magnesium Alloy Construction
- Weight: 75g
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$50.95
Sunwayfoto LP-76 Leveling Plate
- Accurate Leveling For Ballhead w/o Level
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$31.95
Benro 75mm Half Ball Adapter
- Adapts Flat-Based Equipment.
- Short Tie-Down Thread.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$84.00
You Pay:
$359.00
SmallRig L-Bracket & Shoe Mount Kit for FUJIFILM X-T4
- Formfitting L-Bracket for FUJIFILM X-T4
- Additional Shoe Mount for Accessories
- Integrated Arca-Type Mount
- Multiple 1/4"-20 Accessory Threads
- Leaves Open Access to Ports and Slots
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$61.95
Really Right Stuff R-Mount Clamp Rosette Adapter
- Rosette Quick Release Female Clamp Adapter for Select Ball Heads
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$40.95
Manfrotto 236 Surveyors Spiked Foot - for 679, 680 & 681 Series Monopods
- Replaces #3257
- 25mm diameter hole
- With 20mm adapter
- Firmly plant into the ground
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$62.95
Manfrotto 120DF - Converter Plate (Indent Only)
- For use of 3/8" Male accessories
- Joint for arms
- Converts 3/8'' screw to 1/4''
- Allows using accessory arm as column extension
- Made of aluminium
In Stock
Usually ships in 2 - 3 working days
You Pay:
$59.95
Manfrotto 131TC Tablemount Geared Column with Clamp
- Replaces #3253
- 3.8 cm jawed clamp
- Fastens securely
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$629.00
Really Right Stuff TA-20 Leveling Base with 3/8"-16 Mounting Stud
- Load Capacity: 11kgs.
- 40° of Adjustment.
- Level Tripod without Adjusting Legs.
- Reversible 3/8"-16 to 1/4"-20 Top Mount.
- Compatible with Series 2 Tripods.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$739.00
Really Right Stuff TA-3 Leveling Base with Platform and Hook
- For RRS Versa S.3 and Gitzo S. 3 Tripods
- Hook for Stabilising Weight
- Load Capacity:11.3 kg
- 30 Degrees Total Levelling
- Large 12mm Bubble Level
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$639.00
Tether Tools Rock Solid 4-Head Tripod Cross Bar + Tether Tools Rock Solid 2-Head Cross Bar Side Arm
Compatible with Tether Table Aero, Supports a Custom Workstation
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$449.00
Really Right Stuff Ultralight L-Bracket for Nikon Z 7 and Z 6
- One-Piece Design L-Bracket
- Arca-type-Compatible Dovetails
- Quick Release Function on Each Axis
- Maintains Battery and Port Door Access
- Anti-Twist Flanges
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$389.00
Leofoto TFC-S3/8 36mm 3/8" Tripod Replacement Foot Claws (set of 3)
- For a more secure tripod standing
In Stock with Supplier
Usually ships in 3 - 4 working days
You Pay:
$63.95
Leofoto TFC 3/8" 30mm Tripod Replacement Foot Claws (Set of 3)
- For a more secure tripod standing
In Stock with Supplier
Usually ships in 3 - 4 working days
You Pay:
$75.95
Manfrotto 553 Right Angle Bracket for Leveling Center Column
- 3/8" male and female tripod and head connections
- Simple L bracket
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
Sirui SL-200 Carbon Fibre Center Column Extension
- Maximum Height of 32cm
- Minimum Height of 20cm
- Load Capacity of 15Kg
- Carbon Fibre
- Compatible with 3/8″ inch mount
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$50.95
Peak Design Spike Feet Set
- Replacement Spike Feet.
- Stainless Steel Construction.
- Fits Carbon and Aluminium Travel Tripods.
- Stabilises on Ice, Dirt, or Gravel.
- Includes Hex Wrench and Microfiber Pouch.
In Stock
Usually ships in 2 - 3 working days
You Pay:
$57.95
3 Legged Thing BASE85 Arca-Swiss Compatible 85mm Wide Quick Release Plate (Metallic Slate/Gray)
- Arca-Type Compatible
- 1/4"-20 Stainless Steel Camera Screw
- Adjustable Camera Screw Channel
- Rubberised Anti-Twist Surface
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$94.95
Benro ARCASMART360 Panning QR Plate (Arca & Manfrotto RC2 Compatible)
- 360-Degree Rotating Adapter Plate
- Arca-Type and Manfrotto RC2 Compatible
- Numbered Panoramic Scale
- Camera Screw with D-Ring, Hex, Coin Slot
- Rubberised Anti-Twist Traction Pads
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$54.95
Really Right Stuff LCF-10 Foot for Nikon AF-S 70-200mm f/2.8 VR & VR II
- For Nikon AF-S 70-200mm f/2.8 VR & VR II
- Arca-Type Compatible Dovetail Mount
- Silver Lock Knob
- 1/4"-20 Mounting Socket
- Push-Button QD Sling Swivel Socket
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$289.00
Leofoto MC-30 Multipurpose Clamp
- Locking Diameter: 30mm
- Mounting Screw/hole: UNC 1/4"
- Weight: 71g
- Max load: 2kg
In Stock with Supplier
Usually ships in 3 - 4 working days
You Pay:
$52.95