Items on Sale

• 32" (820mm) Horizontal Reach
• 33" (840mm) Vertical Reach
• Touch-Fastener Cable Wraps
• Desk-Clamp Included
• Desk-Insert Hardware

• Ultra-Compact Wireless Microphone System
• Series IV 2.4GHz Digital Transmission, 128-Bit Encryption
• 3.5mm TRS Analog Output, USB-C & iOS Compatible Digital Output
• In-Built Rechargeable Li-Ion Battery - Up to 7 Hrs Battery Life

• Vlogger, Run & Gun, Voiceover, Podcaster
• For Cameras, Mobile Devices & Computers
• Runs on Plug-In Power or USB Power
• Simple Operation with No Controls
• 3.5mm TRS Output to Camera or Headphones

• Optimised for Podcasting & Broadcasting
• End-Address, XLR Mic Tailored for Speech
• Dynamic Capsule Minimises Room Noise
• Internal Pop Filter Reduces Plosives
• Integrated Shockmount Reduces Vibrations

• Compact, easy-to-use console
• Studio-grade audio inputs
• Revolution Preamps™, APHEX® audio processing
• High-power quad-core audio engine
• Six customisable SMART pads

• 24-Bit/48 kHz Resolution Capture.
• Cardioid Polar Pattern.
• 3.5mm Headphone Monitoring Jack.
• Direct Mix Control.
• No Drivers Required.

• For Wireless GO II Microphones
• Accommodates both transmitters and the receiver
• Integrated battery for three full recharges
• Rugged enclosure and zip system

• 4 x coloured windshields
• 4 x Cable Identification Rings
• 4 x Tags
• Sticker Sheet
• Compatible with Wireless GO I & II, Lavalier GO and smartLav+

• Matched Pair
• 1 dB or Less Sensitivity Between Mics
• Cardioid Polar Pattern
• 12.70 mm Gold-Plated Membrane Capsule
• Permanently Polarised

• Compact, easy-to-use console
• Studio-grade audio inputs
• Up to 4K30 / 2K60 streaming
• Up to 2K120 / 4K60 pass-through
• Four customisable SMART pads

• 3.5mm Female TRS to 3.5mm Male TRRS
• Connect 3.5mm Out Mics to Smart Devices
• Colour Coded, Gold-Plated Connectors

• Large-diaphragm cardioid microphone
• HF6 1-inch true condenser capsule
• Smooth frequency response
• High sensitivity and high SPL handling
• Extremely low noise (4dBA)
• Highly durable finish

• High-quality shielded 3.5mm TRS patch cable

• Large-Diaphragm (1") Gold-Sputtered Condenser Capsule
• Cardioid Polar Pattern
• Extended Frequency Response
• 32-bit Float Digital Output
• XLR and USB Connectivity
• Exceptionally Low Self-Noise (4dBA)

• Omnidirectional Pattern
• Shock Mounted Capsule Reduces Noise
• Internal Pop Screen Reduces Plosives
• Frequency Response Optimised for Speech
• Die-Cast Aluminium Body & Matte Finish

• Measures 180mm Long
• Standard Hole Diameter 18 to 20mm

• For Microdot-Equipped Microphones.
• For Transmitters with Locking 3.5mm Jack.
• For Select Sennheiser Mic Transmitters.
• For Senal/Rode/Zoom/Nady Transmitters.
• For Azden & Tascam Transmitters.

• Works Across all Platforms
• Automatic Hardware Audio Limiter
• Supercardioid Dynamic Microphone
• Boom Arm & Foam Pop Filter Included
• USB-C & USB-A Cables Included

– 8-layer carbon fibre in 4 sections – Reversible 1/4 inch and 3/8 inch screw – Locking screw for head – Water and dust-proof twist locks – Stabilising hook

• 24mm focal length
• Fast T1.2 aperture
• 30cm close focus distance
• Aircraft grade aluminium body
• Create a cinematic feel in your videos
• Built in focus gears

• Rich, detailed audio capture
• Professional dynamic USB microphone
• Superior room noise rejection
• Internal DSP for advanced audio processing
• Pop shield and shock mount included

• Film, Video, Interview, Presentation
• For Various Transmitters via Adapter
• Omnidirectional for Consistent Levels
• 3mm Subminiature Design

• Timecode from TC-1 to Arri Alexa Mini
• Right-Angle Locking 3.5mm TRS Connector
• Right-Angle 5-Pin LEMO Connector

19 to 25mm Mounting Clips Hytrel Construction Integrated 3/8" Threaded Stand Adapter

• Timecode from TC-1 to Various Devices
• Right-Angle Locking 3.5mm TRS Connector
• Straight 5-Pin LEMO Connector

• Fits Mics from 0.75 to 0.87" in Diameter
• Both On and Off Boom-Pole Support
• Adjustable Sliding Suspensions
• Built-In XLR Connector Holder
• 1/4"-20 and 3/8"-16 Threads
• 2-Prong Hinge Mount

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Soft pouch for either Theos transmitter or receiver

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Works Across all Platforms
• Automatic Hardware Audio Limiter
• Supercardioid Dynamic Microphone
• USB-C & USB-A Cables Included

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Figure-8 Polar Pattern
• 20 Hz to 20 kHz Frequency Response
• 130 dB Maximum SPL
• 1.8 Micron Ribbon Element
• Internal Shock Mounting System

• Ideal for Low-Light Shooting
• Outstanding Optical Performance
• Compact Size
• Consistency In a Set
• Built-in Focus Gears
• S35 and APS-C Sensor Compatibility

• For PG2-R Pistol Grip & SM Shockmounts
• Neutrik & Switchcraft XLR Connectors
• Strain-Relief Junction Box
• 43 cm Cable Length

• Provides Additional Support
• For High Movement Usage

• Monopod Tilt Head
• Calibrated Markings for 90-Degree Tilt
• Built-In Bubble Level
• Arca-Compatible Quick-Release Base
• Weighs Only 330 g

• For Sanken CS-M1 Microphone
• Works with Rode VideoMic NTG
• Fits 1.9 to 2.2cm Microphone Diameters
• Fur Cover Reduces Wind Noise
• Acoustically Transparent
• Protects Against Dust and Dirt