Items on Sale

• 32" (820mm) Horizontal Reach
• 33" (840mm) Vertical Reach
• Touch-Fastener Cable Wraps
• Desk-Clamp Included
• Desk-Insert Hardware

• Compact, easy-to-use console
• Studio-grade audio inputs
• Revolution Preamps™, APHEX® audio processing
• High-power quad-core audio engine
• Six customisable SMART pads

• Ultra-Compact Wireless Microphone System
• Series IV 2.4GHz Digital Transmission, 128-Bit Encryption
• 3.5mm TRS Analog Output, USB-C & iOS Compatible Digital Output
• In-Built Rechargeable Li-Ion Battery - Up to 7 Hrs Battery Life

• Vlogger, Run & Gun, Voiceover, Podcaster
• For Cameras, Mobile Devices & Computers
• Runs on Plug-In Power or USB Power
• Simple Operation with No Controls
• 3.5mm TRS Output to Camera or Headphones

• Optimised for Podcasting & Broadcasting
• End-Address, XLR Mic Tailored for Speech
• Dynamic Capsule Minimises Room Noise
• Internal Pop Filter Reduces Plosives
• Integrated Shockmount Reduces Vibrations

• 24-Bit/48 kHz Resolution Capture.
• Cardioid Polar Pattern.
• 3.5mm Headphone Monitoring Jack.
• Direct Mix Control.
• No Drivers Required.

• For Wireless GO II Microphones
• Accommodates both transmitters and the receiver
• Integrated battery for three full recharges
• Rugged enclosure and zip system

• 4 x coloured windshields
• 4 x Cable Identification Rings
• 4 x Tags
• Sticker Sheet
• Compatible with Wireless GO I & II, Lavalier GO and smartLav+

• Matched Pair
• 1 dB or Less Sensitivity Between Mics
• Cardioid Polar Pattern
• 12.70 mm Gold-Plated Membrane Capsule
• Permanently Polarised

• Compact, easy-to-use console
• Studio-grade audio inputs
• Up to 4K30 / 2K60 streaming
• Up to 2K120 / 4K60 pass-through
• Four customisable SMART pads

• 3.5mm Female TRS to 3.5mm Male TRRS
• Connect 3.5mm Out Mics to Smart Devices
• Colour Coded, Gold-Plated Connectors

• Large-diaphragm cardioid microphone
• HF6 1-inch true condenser capsule
• Smooth frequency response
• High sensitivity and high SPL handling
• Extremely low noise (4dBA)
• Highly durable finish

• High-quality shielded 3.5mm TRS patch cable

• Large-Diaphragm (1") Gold-Sputtered Condenser Capsule
• Cardioid Polar Pattern
• Extended Frequency Response
• 32-bit Float Digital Output
• XLR and USB Connectivity
• Exceptionally Low Self-Noise (4dBA)

• Omnidirectional Pattern
• Shock Mounted Capsule Reduces Noise
• Internal Pop Screen Reduces Plosives
• Frequency Response Optimised for Speech
• Die-Cast Aluminium Body & Matte Finish

• Fits Magic Carpet Short or Long Tracks
• Brake and Bubble Level on Carraige
• 3/8"-16 and 1/4"-20 Reversible Screw
• Adjustable Quick Release Legs
• Genie Rope Lock Off Hooks

• Rich, detailed audio capture
• Professional dynamic USB microphone
• Superior room noise rejection
• Internal DSP for advanced audio processing
• Pop shield and shock mount included

• Supports Monitors up to 9"(22.9 cm)
• Constant Friction System
• Mounts on Either Side of Camera
• Mounts to Standard Hot Shoe
• 1/4"-20 Mounting Screw

• Attaches Two HeadONE Units Together
• Enables Both Pan and Tilt Motion
• 7 lb Capacity

• Locks Down Quickly
• Load Capacity: 3 kg
• 1/4"-20 Mounting Thread and Screw
• Tool-Less Operation
• Aluminium & Stainless Steel Construction

• For the Edelkrone JibONE
• Protects Against Dust/Scratches/Impacts
• 2 x Interior Accessory Compartments
• Adjustable Shoulder Strap
• Built-In Hand Strap

Provides Stop-Motion Capability, Supports Shoot-Move-Shoot, Integrated Focus Adjustment Knob, Supports Dragonframe Software, USB Power

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• For Lenses with 25 to 110mm Diameter
• Standard 0.8 Mod / 32 Pitch Gearing
• Works with Most Follow Focuses

• Internal Divider and Compartment
• Loops for Carabiner
• Dual Zip Opens Flat

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Wi-Fi and Bluetooth Camera Remote
• Camera Control from Syrp App
• Ramp Exposure During Time Lapse
• Control ISO, Aperture & Shutter Speed
• HDR Mode for Time-Lapse Sequences

• For Use with Genie & Genie Mini
• Combine Two Units for Multi-Axis Moves

• Slider Track for Magic Carpet System
• For Use with Carriage & End Caps
• Supports Loads up to 7 kg

• Figure-8 Polar Pattern
• 20 Hz to 20 kHz Frequency Response
• 130 dB Maximum SPL
• 1.8 Micron Ribbon Element
• Internal Shock Mounting System

• For PG2-R Pistol Grip & SM Shockmounts
• Neutrik & Switchcraft XLR Connectors
• Strain-Relief Junction Box
• 43 cm Cable Length

• For Select Stabilizers and Sliders
• Drives the Slide Motion
• Powers Head & Focus Modules
• Standalone Operation

• Provides Additional Support
• For High Movement Usage

• Short Track for Magic Carpet System
• Lightweight Carbon Fiber Construction
• Use with Carriage & End Caps
• Supports Loads up to 5 kg
• Compatible with Original MC Components

• Extension Track for Magic Carpet System
• Lightweight Carbon Fibre Construction
• Use with Carriage & End Caps
• Supports Loads up to 11 lb
• Compatible with Original MC Components