Items on Sale

• 32" (820mm) Horizontal Reach
• 33" (840mm) Vertical Reach
• Touch-Fastener Cable Wraps
• Desk-Clamp Included
• Desk-Insert Hardware

• Ultra-Compact Wireless Microphone System
• Series IV 2.4GHz Digital Transmission, 128-Bit Encryption
• 3.5mm TRS Analog Output, USB-C & iOS Compatible Digital Output
• In-Built Rechargeable Li-Ion Battery - Up to 7 Hrs Battery Life

• Vlogger, Run & Gun, Voiceover, Podcaster
• For Cameras, Mobile Devices & Computers
• Runs on Plug-In Power or USB Power
• Simple Operation with No Controls
• 3.5mm TRS Output to Camera or Headphones

• Optimised for Podcasting & Broadcasting
• End-Address, XLR Mic Tailored for Speech
• Dynamic Capsule Minimises Room Noise
• Internal Pop Filter Reduces Plosives
• Integrated Shockmount Reduces Vibrations

• Compact, easy-to-use console
• Studio-grade audio inputs
• Revolution Preamps™, APHEX® audio processing
• High-power quad-core audio engine
• Six customisable SMART pads

• 24-Bit/48 kHz Resolution Capture.
• Cardioid Polar Pattern.
• 3.5mm Headphone Monitoring Jack.
• Direct Mix Control.
• No Drivers Required.

• For Wireless GO II Microphones
• Accommodates both transmitters and the receiver
• Integrated battery for three full recharges
• Rugged enclosure and zip system

• 4 x coloured windshields
• 4 x Cable Identification Rings
• 4 x Tags
• Sticker Sheet
• Compatible with Wireless GO I & II, Lavalier GO and smartLav+

• Matched Pair
• 1 dB or Less Sensitivity Between Mics
• Cardioid Polar Pattern
• 12.70 mm Gold-Plated Membrane Capsule
• Permanently Polarised

• Compact, easy-to-use console
• Studio-grade audio inputs
• Up to 4K30 / 2K60 streaming
• Up to 2K120 / 4K60 pass-through
• Four customisable SMART pads

• 3.5mm Female TRS to 3.5mm Male TRRS
• Connect 3.5mm Out Mics to Smart Devices
• Colour Coded, Gold-Plated Connectors

• Compact & Lightweight
• Intelligent BMS Chip
• Various Interfaces for Wide Compatibility
• Practical OLED Display
• Premium Li-Battery

• Large-diaphragm cardioid microphone
• HF6 1-inch true condenser capsule
• Smooth frequency response
• High sensitivity and high SPL handling
• Extremely low noise (4dBA)
• Highly durable finish

• High-quality shielded 3.5mm TRS patch cable

• Large-Diaphragm (1") Gold-Sputtered Condenser Capsule
• Cardioid Polar Pattern
• Extended Frequency Response
• 32-bit Float Digital Output
• XLR and USB Connectivity
• Exceptionally Low Self-Noise (4dBA)

• Omnidirectional Pattern
• Shock Mounted Capsule Reduces Noise
• Internal Pop Screen Reduces Plosives
• Frequency Response Optimised for Speech
• Die-Cast Aluminium Body & Matte Finish

• Arca-Swiss Compatible Quick Release
• Adjustable Centre of Gravity
• Detachable Telescopic Handle
• 1/4"-20 Threaded Accessory Mounting Hole

• Quick switch between horizontal and vertical
• Gives full access to ports and LCD screen
• Arca-type plate and Manfrotto RC2 plate
• Quick-release plate supports handle
• Baseplate can be used separately

• For Select SmallRig Cages and Brackets
• Right-Angle HDMI/USB Type-C Adapter
• Female-to-Male HDMI and USB Type-C Ports
• Mounts Using Thumbscrew
• PVC and Stainless Steel Construction

• Offers comfortable run-and-gun shooting experience
• Flexible and compatible with both big and small cameras
• Features memory foam
• Weights only 302g in total
• Could provide more mounting options

• Ergonomic silicone shoulder pad
• Built-in VCT-14 quick-release baseplate
• Top quick-release plate
• Adjustable extension arm
• Ergonomic handle surface

• Lightweight Design
• Wireless Control
• 2,700 - 6,500K
• CRI: 96+
• TLCI: 97+
• 115,000Lux (1m) at 5600K

• USB-C charging port
• Pioneering high-current charging (5V 2.2A)
• 2400mAh nominal capacity
• Visually distinctive colour
• Fully decoded, wide compatibility
• Quality battery cell

• Fully Decoded Chip
• Long Battery Life

• Rich, detailed audio capture
• Professional dynamic USB microphone
• Superior room noise rejection
• Internal DSP for advanced audio processing
• Pop shield and shock mount included

• Lightweight Design
• Wireless Control
• CRI 96+
• TLCI 97+
• 5600K
• 172,000Lux (1m) at 5600K

• Styled in a vintage heavy metal fashion
• Metallic rust and leather brown
• Shutter button adapter enhances shutter control
• Hot shoe cover with a bubble level

• Common screw and screwdriver set
• Includes 2 M3x5 screws and 2 M4 screws
• Double-ended and flat-head screwdrivers

• Follow Focus Controller
• Wireless Handgrip and Handgrip Adapter
• Run/Stop REC Function Support
• Right- or Left-Hand Support
• Can Power Motor Using USB-C Cable

• For iPhone 15 Pro series video cage

• Dedicated one-handed video kit
• Varied accessory mounts
• SmallRig quick-release design
• Maintains access to all buttons
• All-metal full cage

• A form-fitting cage designed for Atomos Shinobi.
• NATO rails on the top and bottom.
• 1/4’’-20, 3/8’’-16 and ARRI locating holes.
• HDMI cable clamp included.

• Arca-Swiss type bottom plate and side plate
• Features an Arca Swiss quick-release plate
• Comes with a stretchable side plate
• gives full access to ports and cables
• Built-in magnetic wrench

• Built-in 15mm rod clamps
• Strong compatibility
• Anti-false-touch design
• Compatible with DJI RS series
• Modular design

• Classic 2:3 soft-box for layered light spread
• Industrial-grade cloth with highly-reflective coating
• Made of sturdy and durable metal
• Honeycomb grid and inner/outer diffusers

• Focus Controller for Cine/DSLR Lens
• Works with Wireless Handgrip & Motor
• Power-Failure Memory
• Replaceable Marking Disk
• Up to 20-Hour Battery Life
• A-B Point Settings & Vibrating Warning

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Lightweight Design
• Wireless Control
• CRI 96+
• TLCI 97+
• 5600K
• 149,000Lux (1m) at 5600K

• Accurate and Sensitive Recording Omni-Directional Microphone
• Intelligent Noise Reduction
• 3.5mm TRRS Input Connection, Battery-Free, Plug-and-Play
• Strong Anti-Interference, low Self-Noise
• Compatible for Phone, Tablet, and Camera

• Compatible with 3010 series follow focus
• Incompatible with gears of other modules

• Designed for ZHIYUN CRANE 3S Gimbal.
• 1/4"-20 & ARRI 3/8”-16 Accessory Mounts.
• Connects to Gimbal via a Captive 3/8”-16 Screw & Locating Pins.
• Compatible with Original Sling Handle Adapter and SmallRig Handle 2636.
• Integrated Protective Rubber Pad.

• Wear-resistant, scratch proof tempered glass film.
• Anti-Shock: IK03 standard.
• 5D arc-rounded edges.
• 4mm touch-accurate control.
• Electrostatic nano-adsorption.

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Fully Decoded Chip
• Long Battery Life

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• Use with NTH-100 Headphones
• Flexible, One-Sided Cable
• 3.5mm TRS Output Connector
• Locking Connector Attaches to Earcup
• Set of Coloured Rings for Identification

• 2 x Screen Protectors and Cleaning Accessories
• Waterproof, Anti-Oil and Anti-Fingerprint
• 2.5D Arc-Rounded Edge, 0.4mm Touch-Accurate Control
• Fitted via Electrostatic Nano-Adsorption
• Anti-Shock: IK03 Standard

• Form-fitting Aluminum Protective Frame
• Easy-to-Grasp Knurled Locking Screw
• Soft Pads Inside Prevents Scratches
• Silicone Lens Cap

• Compatible with mirrorless camera and DSLR
• Included baseplate and a QR plate
• Equipped with 1/4"-20 and 3/8"-16 threaded holes

• Formfitting Camera Cage for Canon R5/R6
• Top Handle, HDMI/USB Cable Clamp
• Maintains Access to Ports & Controls
• 1/4"-20 & 3/8"-16 Accessory Threads
• Shoe Mount, Integrated Arca-Type Base

• Figure-8 Polar Pattern
• 20 Hz to 20 kHz Frequency Response
• 130 dB Maximum SPL
• 1.8 Micron Ribbon Element
• Internal Shock Mounting System

• Features multi-model electronically controlled REC function
• Compatible with Sony, Panasonic, Fujifilm, Z Cam
• Ergonomically designed to improve grip experience
• Made of high-quality wood, secured with ARRI rosette

• Bottom 1/4"-20 Screw
• 1x M2 Screw on Both Sides
• Built-In Grip
• Full Access to Buttons, Card Slots, Screen, & Battery Door
• Various Accessory Mounts

• Formfitting Camera Cage
• Arca-Type Base, Shoe Mount, NATO Rail
• 1/4"-20 & 3/8"-16 Accessory Threads
• 1/4"-20 Screw, QD Mounts, Strap Slots
• Maintains Access to Camera Controls
• Durable Aluminium Construction

• For PG2-R Pistol Grip & SM Shockmounts
• Neutrik & Switchcraft XLR Connectors
• Strain-Relief Junction Box
• 43 cm Cable Length

• For LaCie Rugged SSD.
• Attaches to Cage With Two Captive 1/4”-20 Screws.
• Secures SSD & USB Type-C Cable.
• Thumbscrew Fastener.

• Dedicated tripod and LED light Vlog kit for Sony ZV-E10
• Integrate Arca-Swiss plate, cold shoe, and 1/4"-20 threads
• Arca-type tripod for quick disassembly and assembly
• Portable mini LED light with four brightness levels

Aluminium-Alloy Cage for All-Round Protection Multiple Accessory Mounting Points Accomodates Atomos Sun Hood or Included SmallRig Sun Hood Includes Cable Clamp Scratch-Proof, with Anti-Fingerprint Screen Protector

• Dedicated pro kit for SONY FX6
• Features two top plates that suit the original handle
• ARRI baseplate allows quick adjustment based on the center of gravity of camera
• Manfrotto quick release plate on the top of the baseplate that enables switch between tripod and handheld mode

• Designed especially for 3578 Anamorphic lenses
• fixes lens via extruding rubber
• easy to use, and prevents scratches
• Magnetic securing for quick switch between varied filters
• Weighs only 24g, no extra burden for shooting

• Provides Additional Support
• For High Movement Usage

• Formfitting Aluminium Camera Cage
• Tabletop Mini Tripod with Ball Head
• Mic Adapter Holder
• Multiple 1/4"-20 Threads, Shoe Mounts
• Mount Microphone, Light, and Accessories

• Dedicated retro grip for Nikon Z fc
• Built-in Arca Swiss plate
• Features 1/4"-20 threaded hole in grip
• Built-in cold shoe mount

• Specially designed for iPhone 14 Pro Max
• Wireless control side handle
• Multiple mounting holes
• Allows attaching M-mount or 17mm threaded lenses

• Power Wireless Follow Focus Motor
• NP-F/L-Series Battery Plate
• Quick Release Design
• Mounts Directly onto Motor Contacts

• Directly mounted onto the following focus system
• Quick switch between handheld and tripod modes

• Wear-resistant, scratch-proof tempered glass film
• Anti-Shock: IK03 standard
• 2.5D arc-rounded edges
• 0.4mm touch-accurate control
• Electrostatic nano-adsorption.

• Formfitting Aluminium Camera Cage
• Open Access to Controls and Ports
• Ergonomic Right-Side Grip, Shoe Mount
• Integrated Arca-Type Base, NATO Rail
• 1/4"-20 and 3/8"-16 Accessory Threads

• All-In-One Form-Fitting Full Cage Protects Camera
• 1/4''-20 & ARRI 3/8" -16 Holes, Cold Shoe, NATO Rail & More
• Anti-Twist Two-Point Locking Design
• Built-In Arca-Swiss Quick Release Plate
• Built-In Magnetic Spanner for Easy Access

• Compatible with Mini Follow Focus 3010
• Standard 0.8 MOD Gear, 38 Teeth
• Works with 0.8 MOD Lenses or Gear Rings
• ABS Plastic Construction

• For LaCie Portable SSD.
• Attaches to Cage With Two Captive 1/4”-20 Screws.
• Secures SSD & USB Type-C Cable.
• Thumbscrew Fastener.

• Dedicated Sunhood for Panasonic LUMIX GH6
• Reduces Glare for Outdoor Shooting
• Slide-On Mounting, Fastened by Hook & Loop
• Raised Internal Edges for Stability and to Prevent Twists
• Folds Flat for Transport and Storage

• Arca-Swiss Quick Release Plate
• Battery Door Hinge Arm
• Side Plate Cold Shoe Mount
• Strap Slots for Hand Strap
• Bulit-In Screwdriver

• Compatible with Sony Multi-Terminal Cameras
• Works With SmallRig Control Handle HTN2670
• Control Recording Start and Stop
• Sony Multi to Type C Connector

• Formfitting Full Cage for Sony ZV1 Camera
• Allows Access to Battery & Memory Card Door
• Ergonomic Side Handle Provides Comfort
• Integrated Cold Shoe & 1/4"-20 Accessory Mounts
• Compatible with Cable Clamp 1693

• Mounts Converter on Cage or Rig
• Clamp & Thumbscrew Secures Unit in Place
• 1/4"-20 Screws Mount Holder onto Cage
• Rubber Padding Prevents Scratches
• 360° Rotation

• Revolutionised zoom in/out design
• New heat dissipation technology
• Improved illumination
• Works with SmallRig 8-leaf Barn-doors
• Storage bag for greater protection

• Modular design: works with handgrips to cater to various scenes.
• Functional buttons: supports videoing / photographing, joystick control, mode switch, centring / locking, sleep mode
• Wireless control: freely controls stabiliser in an array of scenes (max range: 100m).
• Bi-directional magnetic attraction: quickly attaches 3919 and 3954.

• Suitable for travel shooting, live-streaming
• Exclusively designed for Canon R50
• Includes an octopus-shape tripod
• Portable bi-colour LED video light

• Arca-Swiss L-bracket, press-to-flip design
• Folded and stored as one portable piece
• Stretch the baseplate up to 20mm

• Ergonomically Designed
• Ebony Wood Feels Comfortable

• One Top Flag Opens 180°
• Left- and Right-Side Flags Extend 38°
• Quick Release Design, 1/4"-20 Screw
• Carbon Fibre and Aluminium Construction

• 32-bit Dual-Core Intelligent Audio Processing Chip
• Built-In Sound Card for Instant Creation
• Dual-Channel (24 bit / 48k Hz) Studio Standard Audio Quality
• Multi-Capsule Array for 360° Sound sSmpling
• Stereo / Omnidirectional / Cardioid/ Bi-Directional Modes

• Clamp-on rings for SmallRig Matte Box 2660
• Split design for a secure fit
• Quick disassembly and assembly, efficient and time-saving
• Anti-twist edge prevents accidental disconnection and ensures safety
• Drawstring bag for easy storage and protection from scratches

• Aluminium Alloy
• Press and Flip Design
• Protects HDMI & USB-C Cables Ports
• Attaches to Cage via two M3 Screws

• Clamp-on rings for SmallRig Matte Box 2660
• Split design for a secure fit
• For lenses with 95mm front diameter
• Anti-twist edge prevents accidental disconnection and ensures safety

• Suitable for Shotgun Microphones
• Lightweight
• Extends from 0.85 m to 3 m
• Five Sections
• Intuitive Twist-Lock Mechanic

• For Boompole or Handheld Applications
• Dual Rycote Lyre Mounts
• Reduces Handling Vibrations
• Four Possible Cable Mounting Points
• Lightweight Handle