(no ratings yet) Thanks for your rating!
Zacuto Cine Mini EVF Recoil V2Product #31400 | SKU Z-CMER-V2 |(no ratings yet) Thanks for your rating!
- Shoulder-Mounted Rig
- Designed for Cameras with Top Handle
- VCT Universal Baseplate with 15mm Rods
- Zgrip Z-Mount Zwivel Handgrip
- 3" Z-Rail
The Cine Mini EVF Recoil rig is compatible with cameras that already come with a top handle with ¼ 20 screw holes, like the Panasonic DVX200, Ursa Mini, AJA Cion, and more. It places your camera comfortably up on your shoulder and includes a handgrip and 15mm rod lock to attach to the top handle.
This is a Next Generation Recoil rig designed for optimal balance and comfort when shoulder mounted or on a tripod. With lenses and cameras being similar weights, the balance point is where the lens meets the camera body. In a Recoil rig, the balance point needs to be directly over your shoulder which puts the camera behind you. This requires focus, monitoring and camera controls to be relocated forward, creating a lighter and shorter rig.
VCT Pro Baseplate – this baseplate has a sliding top plate for quickly removing the camera from the rig or fast len changes, a built-in, curved shoulder pad, a v-wedge tripod connector (with ¼” 20 and 3/8" 16 screw option). It has removable and extendable 6.5” iris rods and rows of ¼” 20 screw holes along the sides for accessories. It has quick release 15mm rod parts in the rear. The recessed rod mount offers maximum accessory capable space under your camera lens.
Zgrip Z-Mount Zwivel – Fully articulating handgrip. Attaches to a single 15mm rod with a Zwivel mount that can be set at multiple different angles for comfort and ease of use.
3” Z-Rail – This Z-Rail screws to the top handle of your camera, allowing you to attach a 15mm rod lock and other Z-Rail accessories.
Z-Rail Rod Lock 90 Degree – This mount gives you a side facing 15mm rod port to mount accessories such as the Axis Mini.The Z-Rail attaches via two 1/4 20 screws, so if your camera top handle has 3/8 16 screw holes, you may need adapters.
NOTE: This rig requires the addition of a monitor or Zacuto EVF.
Recommended Accessories - shown in pictures
|VCT Pro Baseplate|
|Mount Types||VCT14-compatible V-wedge
15 mm LWS rod ports in front and back
1/4"-20 and 3/8"-16 tripod mount holes
1/4"-20 and 3/8"-16 camera screws included
16.5 cm 15mm rods included
ARRI M6 rosette
Three 1/4"-20 threaded holes for accessories
|Dimensions||36.2 x 10.8 x 5 cm (with included 16.5 cm rods)|
|Zgrip Z-Mount Zwivel Handgrip|
|Rod Length||114 mm|
|Rod Diameter||15 mm|
In The Box
Reviews(no ratings yet)
Give it a quick rating:
Thanks for your rating!
Write a review