Monitors & Display

• Simultaneous Cross-Platform Streaming
• Encoder, Monitor, Switcher, and Recorder
• 8" Touchscreen Control LCD Display
• Live Switch from up to 8 Sources

• 18" Display, UHD 4K Resolution
• 1000 cd/m², SmallHD OS4.1
• 12G-SDI and HDMI 2.0 Inputs and Outputs
• 3D LUT Support, SD Card Slot
• RJ45 Ethernet and GPI, XLR Power Input

• Extend Position of Monitor or Viewfinder
• 19 cm NATO Rail Extension
• Clamps to Standard NATO Rail
• Adjust Tilt by Loosening Screw

• Attaches to NATO Standard Rail
• 1/4"-20 Thread Spacing for RED LCD
• Supports Monitors with 1/4"-20 Threads
• Offset Bracket Included
• No Connections or Controls Blocked

• Mount a 5 or 7" On-Camera Monitor
• NATO Clamp Mount, 3.3 lb Maximum Load
• Tilts 180°, Lockable in Any Position
• Protective Rubber Padding on Top
• Includes Allen Wrench

• Covers 10-13 cm Monitor Screens (Diagonal)
• Fits RED 4.7" & 5" Touchscreen Monitors
• Four-Sided Coverage
• Flexible Bottom Area for Button Access

• Covers 6-7" Monitor Screens (Diagonal)
• Fits RED 7" Touchscreen & LCD Monitors
• Four-Sided Coverage
• Flexible Bottom Area for Button Access

• Articulating Arm
• Two sets of 25mm double ball joints
• Tool-less 1/4-20 and 3/8-16 knobs
• 364 mm extended length
• Interchangeable components

• For Director's Monitor Cage v2 (DMCv2)
• Enables Vertical Stacking of DMCv2
• Enables Horizontal Stacking of DMCv2

• For Panasonic EVA-1 Top plate
• Attach with two 1/4-20 screws
• Attach original bracket

• 15mm LWS, 15mm Studio, 19mm Studio Ports
• ARRI Rosettes for Handgrips/Accessories

• Tightness adjustable on each axis
• Tested durability, with tilt load capacity
• Bouncy locating pins
• Holes in thumbscrews
• 1/4"-20 threaded holes

• Supports 5” and 7” Onboard Monitor to 1.5kg
• Swivels 360° and Tilts 170°.
• Tightness Adjustable on Each Axis.
• Features Thumbscrew slots for tightening
• Secures via Two Captive 1/4”-20 Screws Mount

• Supports 5” and 7” Onboard Monitor to 1.5kg
• Swivels 360° and Tilts 170°.
• Tightness Adjustable on Each Axis.
• Features Thumbscrew slots for tightening
• Secures via Cold Shoe Mount

• QR NATO Clamp Mount
• Tightness Adjustable on Each Axis; Swivels 360° and Tilts 180°
• Tested Durability
• Locating Pin and Silicone Pad Prevent Twisting

• Mount to Atomos Sumo Dual-Battery Plate
• 2 x D-Tap to 4-Pin XLR Power Cables
• Use with Gold Mount Batteries
• Input: 11 - 28 VDC

• Mount to Atomos Sumo Dual-Battery Plate
• 2 x D-Tap to 4-Pin XLR Power Cables
• Use with V-Mount Batteries
• Input: 11 - 28 VDC
• Output: Unregulated

• 311 Monitor Holder
• 035 Super Clamp
• 155 Double Ball Joint
• Straps hold monitor securely in place

• Wear-resistant, scratch proof tempered glass film.
• Anti-Shock: IK03 standard.
• 5D arc-rounded edges.
• 4mm touch-accurate control.
• Electrostatic nano-adsorption.

• Dedicated sunhood for Sony Alpha 7S III/Alpha 7C/ZV-1/FX3.
• Reduces reflections during shooting and shades the screen.
• Slide-in mounting, fastened by hook & loop.
• Raised internal edges for stability and prevent twists.

• Keep Sunlight and Glare off LCD Screen
• Attaches to BMPCC 6K Pro Camera
• Secures Using Hook-and-Loop Strip
• Hood Folds Down for Transport
• Leather Hood and Cloth Construction

• 2 x Screen Protectors for BMPCC 6K Pro
• Tempered Glass Film, 2.5D Rounded Edges
• Wear, Water, Oil, and Scratch-Proof
• IK03 Shockproof, Anti-Fingerprint
• Maintains Accurate Touchscreen Control

• 5" 1920 x 1080 Touchscreen-Only Display
• 1000 cd/m², 10-Bit, LCD Panel
• HDMI & 3G-SDI Inputs & Outputs
• Supports Video Input up to UHD 4K30
• SmallHD PageOS 5
• Sliding Touchscreen Lock Switch

• 5" 1920 x 1080 Touchscreen Display
• RED RCP2 Camera Control Upgrade
• Micro-USB to 5-Pin Adapter & Cable
• Microfiber Cleaning Cloth
• 1000 cd/m², 10-Bit IPS LCD Panel

• 5" 1920 x 1080 Touchscreen Display
• 2000 cd/m², 10-Bit LCD Panel, DCI P3
• 2-Pin Locking Power Input
• 5-Pin Locking USB for RED Camera Control
• Side-Mounted Joystick, Back Button
• 1 x HDMI Input, 1 x HDMI Output

• 5" 1920 x 1080 Touchscreen Display
• 3G-SDI and HDMI Inputs & Outputs
• Bright 3000 cd/m² LCD Panel
• 10-Bit 4:2:2 DCI-P3 Colour Gamut
• 5-Pin USB & Ethernet Control Ports
• Power via 2-Pin LEMO Input

• 5" 1920 x 1080 Touchscreen Display
• V-Mount Bolt 6 Receiver Module
• 3G-SDI & HDMI Inputs & Outputs
• 6 GHz Wireless Video Transmission
• Bright 3000 cd/m² LCD Panel
• 10-Bit 4:2:2 DCI-P3 Colour Gamut

• 5" 1920 x 1080 Touchscreen Display
• Bolt 6 Wireless Transmitter Module
• 3G-SDI & HDMI Inputs & Outputs
• 6 GHz Wireless Transmission up to 228m
• Bright 3000 cd/m² LCD Panel
• 10-Bit 4:2:2 DCI-P3 Colour Gamut

• 7" 1920 x 1200 Touchscreen Display
• 6G-SDI & HDMI Inputs/Outputs
• Bright 2300 cd/m² LCD Panel
• 5-Pin USB & Ethernet Control Powers
• PageOS 5 User Interface
• SD Card Slot, IP53 Rating

• 7" 1920 x 1080 Touchscreen Display
• Built-In Bolt 6 Wireless Transmitter
• 6G-SDI & HDMI Inputs/Outputs, 4K I/O
• V-Mount Battery Plate
• 6 GHz Wireless Transmission up to 750'
• Bright 2300 cd/m² LCD Panel

• 7" 1920 x 1080 Touchscreen Display
• Built-In Bolt 6 Wireless Transmitter
• 6G-SDI & HDMI Inputs/Outputs, 4K I/O
• 6 GHz Wireless Transmission up to 750'
• Bright 2300 cd/m² LCD Panel
• 10-Bit 4:2:2 DCI-P3 Colour Gamut

• 7" 1920 x 1080 Touchscreen Display
• Built-In Bolt 6 Wireless Transmitter
• 6G-SDI & HDMI Inputs/Outputs, 4K I/O
• V-Mount Battery Plate
• 6 GHz Wireless Transmission up to 1500'
• Bright 2300 cd/m² LCD Panel

• 7" 1920 x 1080 Touchscreen Display
• Built-In Bolt 6 Wireless Transmitter
• 6G-SDI & HDMI Inputs/Outputs, 4K I/O
• 6 GHz Wireless Transmission up to 1500'
• Bright 2300 cd/m² LCD Panel
• 10-Bit 4:2:2 DCI-P3 Colour Gamut

• Flagship SmallHD Monitor
• 100% DCI-P3 Colour gamut
• 1920 x 1200 Touchscreen control
• 1800nits brightness
• 2-Pin Lemo Power
• Camera Control Optional

• Optically Bonded 7-inch IPS LCD touchscreen
• 1920x1200 resolution
• 1000 nits brightness
• 10-bit color processing in 100% Rec 709
• 4K & HDR compatible
• Micro-USB to 5-Pin Adapter & Cable

• Full HD 7-inch IPS LCD with 1920x1200 resolution
• 10-bit color processing in 100% DCI-P3
• 1800nits of brightness
• 4K & HDR compatible
• 160-degree viewing angle

• SmallHD Cine 7
• Sony L-Series Battery Bracket
• D-Tap to 2-Pin LEMO 36"
• Ultraclear Screen Protector
• Sunhood

• SmallHD Cine 7
• Sony L-Series Battery Bracket
• D-Tap to 2-Pin LEMO 36"
• Ultraclear Screen Protector

• 17" Display, UHD 4K Resolution
• 1,000,000:1 Contrast, 8-Bit Colour
• 1000 cd/m², SmallHD OS4.1
• 12G-SDI and HDMI 2.0 Inputs and Outputs
• 3D LUT Support, SD Card Slot
• RJ45 Ethernet and GPI, XLR Power Input

• 24" Display, DCI 4K Resolution
• 1,000,000:1 Contrast, 10-Bit Colour
• 1000 cd/m², SmallHD OS4.1
• 12G-SDI and HDMI 2.0 Inputs and Outputs
• 3D LUT Support, SD Card Slot
• RJ45 Ethernet and GPI, XLR Power Input

• Mounts Easily on Cine 13 4K Monitor
• Anti-Reflective Screen Protector
• Leave in Place While Viewing
• Acrylic Locking Mount Design
• Protects against Impacts during Travel
• No Tools Required for Installation

• Compatible with Cine 13 4K Monitor
• Locking Acrylic Screen Protector
• Protects against Impacts during Travel
• Mounts Easily on Monitor, Needs No Tools

• Fits 13" Cine 13 4K Monitor
• Works as 3- or 4-Sided Sunshade
• Increases Visibility Outdoors
• Screws onto Sides of Monitor
• Adjust Sides with Easy-Access Snaps

• Designed for 5" SmallHD ULTRA 5 Monitor
• Reduces Glare and Reflections Outdoors
• Folds Easily for Storage

• Designed for 5" CINE 5/INDIE 5 Monitors
• Reduces Glare and Reflections Outdoors
• Folds Easily for Storage

• Add Accessories to Your Cine 13 Monitor
• Multiple 1/4"-20 & 3/8"-16 Threads
• Measures Only 0.3" Thick
• Durable Anodised Aluminium Construction

• For Vision, OLED & Cine 4K Monitors
• Mounts onto Back of Monitor
• Multiple 1/4"-20 Mounting Threads
• 1 x 3/8"-16 Mounting Thread
• Works with Optional V-Mount/Gold Mount
• Can Reposition VESA Mount

• Add Accessories to the Cine 18 Monitor
• Multiple 1/4"-20 & 3/8"-16 Threads
• Durable Anodised Aluminium Construction

• Add Accessories to the Vision 17 Monitor
• Multiple 1/4"-20 & 3/8"-16 Threads
• Durable Anodised Aluminium Construction

• Top Handle for SmallHD 4K Monitor
• Premium Durability, Rubberised Grip
• Instals in Place of Original Handle
• For Cine 13/24, OLED 22, Vision 17/24

• Accessory Kit for Cine 24 Monitor
• 14V/26V Dual V-Mount Battery Bracket
• Anti-Reflective Locking Screen Protector
• 0.9m and 3m 12G-SDI BNC Cables
• Sun Hood, Custom Case with Foam Insert

• Two Feet for SmallHD 4K Monitor
• For Cine 13/24, Vision 17/24, OLED 22
• Feet Set Instals on Base of Monitor
• Allows Monitor to Sit on Flat Surface

• Fits 13" Cine 13 4K Monitor
• 7 RU Rack Size
• Detaches without Removing Rack Hardware
• Mounting Hardware Included

• Fits 24" Cine 24 4K High-Bright Monitor
• 10 RU Rack Size
• Detaches without Removing Rack Hardware
• Mounting Hardware Included

• Fits 22" OLED 22 4K Reference Monitor
• 9 RU Rack Size
• Detaches without Removing Rack Hardware
• Mounting Hardware Included

• For Cine 5 & ULTRA 5 Monitors
• Control ALEXA 35,Mini, Mini LF & AMIRA
• Software License Download Card
• Locking-Connector Right-Angle to Ethernet Cable
• Micro Ethernet Patch Cable

• Control RED KOMODO/DSMC3 from Monitor
• RCP2 Camera Control Software Licence
• 5- to 9-Pin LEMO-Type Control Cable
• Micro-USB to 5-Pin LEMO Adapter
• Full RED Camera Protocol RCP2 Support

• For ULTRA 5 & Cine 7 Monitors
• Control Sony Venice from Monitor
• Software License Download Card
• Micro Ethernet Patch Cable

• For Cine 5 & ULTRA 5 Monitors
• Control RED KOMODO/DSMC3 from Monitor
• Software License Download Card
• 5 to 9-Pin LEMO

• Control RED RCP2 with SmallHD Monitor
• For Indie 5 Monitors
• Camera Control Software License
• 9- to 5-Pin LEMO-Type Connector
• Full RCP2 Control Support

• For Cine 5 & ULTRA 5 Monitors
• Control RED DSMC2 from Monitor
• Software License Download Card
• 5 to 9-Pin LEMO

• For Cine 7, Indie 7 & 702 Touch Monitors
• Control RED DSMC2 from Monitor
• Software License Download Card
• 5 to 9-Pin LEMO
• Micro USB to 5 pin adaptor

• Connect Teradek RT Controller to Monitor
• 1 x Micro-USB Male to 5-Pin LEMO Female
• Passes Through 5V Power
• 1/4"-20 Mounting Thumbscrew
• Works with CTRL.1 and CTRL.3 Controllers

• Ultrahigh-Strength Resin Case
• Waterproof with Sealed Gasket
• Custom-Cut Foam Interior
• Built-In Wheels, Padlock Holes
• Folding Handle

• Ultra-High-Strength Resin Case
• Waterproof with Sealed Gasket
• 2-Layer, Laser-Cut Foam Interior
• Built-In Wheels, Padlock Holes
• Folding Handle & Retractable Handle
• MIL-STD 810G-Spec Waterproofing

• Pick-apart foam insert - fully customizable
• Air/water tight
• Automatic pressure purge system
• Molded-in padlock holes (fits standard size Masterlocks®)

• Ultra-High-Strength Resin Case
• Waterproof with Sealed Gasket
• 2-Layer, Laser-Cut Foam Interior
• Built-In Wheels, Padlock Holes
• Folding Handle & Retractable Handle
• MIL-STD 810G-Spec Waterproofing

• Ultra-High-Strength Resin Case
• Waterproof with Sealed Gasket
• 2-Layer, Laser-Cut Foam Interior
• Built-In Wheels, Padlock Holes
• Folding Handle & Retractable Handle
• MIL-STD 810G-Spec Waterproofing

• Hard-Shell Case for 5 or 7" Monitor
• Customisable Pick-and-Pluck Foam
• Water and Impact Resistant, O-Ring
• Padlock Holes, Fold-Down Handle

• 3-sided to 4-sided with easy to access snaps
• Attaches to screwholes in Cheese Sticks

• 3-sided to 4-sided
• Easy to access snaps

• 3-sided to 4-sided
• Attaches to screwholes in the Cheese Sticks

• Tilt Arm for SmallHD 5" FOCUS Monitor
• Mounts on Camera or Rig with Shoe Mount
• Hinge for Wide Tilting Range
• Mounts on Side 1/4"-20 Thread

• Fits Vision 24 4K HDR Monitor
• Detaches without Removing Rack Hardware
• Toolless Mounting Hardware Included

• For SmallHD 4K Monitors
• Blank Stick Covers Slot on Monitor
• Anodised Aluminium Build

• For SmallHD 4K Monitors
• Adds 1/4"-20 & 3/8"-16 Threads
• Anodised Aluminium Build

• For SmallHD 4K Monitors
• Adds 1/4"-20 Threads
• Anodised Aluminium Build

• For SmallHD 700 Series Monitors
• Flexible Matte Screen Protector
• Protects Screen from Scratches
• Prevents Unwanted Reflection and Glare

• For SmallHD 702 Touch, Cine 7 Monitors
• Flexible Clear Stick-On Screen Protector
• Protects Screen from Scratches
• Provides Polarisation for Monitor

• Anti-Reflective Screen Protector
• Leave in Place While Viewing
• Locking Acrylic Design
• Protects Against Impacts during Travel
• Mounts Easily on Monitor

• Anti-Reflective Screen Protector
• Leave in Place While Viewing
• Locking Acrylic Design
• Protects Against Impacts during Travel
• Mounts Easily on Monitor

• Full Accessory Pack for Vision 17
• Dual V-Mount Battery Plate
• Sun Hood, Deluxe Screen Protector
• Multiple 12G-SDI Cables

• Protects the Ninja V & Ninja V+ Monitor
• Cleaning Tool Kit Included

• All-Round Protection

• Wear-Resistant, Scratch-Proof & Anti-Fingerprint
• Quick Nano Absorption
• 2.5D Arc-Rounded Edges; Anti-Shock: IK03 Standard

Aluminium-Alloy Cage for All-Round Protection Multiple Accessory Mounting Points Accomodates Atomos Sun Hood or Included SmallRig Sun Hood Includes Cable Clamp Scratch-Proof, with Anti-Fingerprint Screen Protector

• Dedicated Sunhood for Panasonic LUMIX GH6
• Reduces Glare for Outdoor Shooting
• Slide-On Mounting, Fastened by Hook & Loop
• Raised Internal Edges for Stability and to Prevent Twists
• Folds Flat for Transport and Storage

• 2 x Screen Protectors and Cleaning Accessories
• Waterproof, Anti-Oil and Anti-Fingerprint
• 2.5D Arc-Rounded Edge, 0.4mm Touch-Accurate Control
• Fitted via Electrostatic Nano-Adsorption
• Anti-Shock: IK03 Standard

• Quickly locked and unlocked
• 360° swivel, 170° tilt angle adjustment
• Max dynamic load capacity of 1.5kg

• Optional dowel pins
• Quickly locked and unlocked
• 360° swivel and 150° tilt adjustable angle
• Adjustable damping
• 1.5kg maximum dynamic load capacity

• Waterproof, anti-oil and anti-fingerprint
• 0.5D arc-rounded edges
• 0.4mm touch-accurate control
• Fitted via electrostatic nano-adsorption
• Anti-Shock: IK03 standard

• Dedicated Atomos Ninja V/Ninja V+ kit for monitor and screen protection.
• Multiple accessories mounting points for magic arm, monitor mount, etc.
• Includes cage, sunhood, screen protector, silicone case.
• Dedicated HDMI cable clamp protects the interface and prevents disconnection.

• Better Monitoring
• Extremely High Resolution
• Front Panel Control
• Professional Connections

• Wide view angle, 4K resolution (3840 x 2160), bright, colourful display
• HDMIX4, DVI, VGA, Audio(L/R) inputs
• Built-in SDI ⇋ HDMI Cross Converter

• Attach/Remove VESA Monitors in Seconds
• Monitor VESA Plate
• 100 x 100 and 75 x 75 VESA Standards

• For Insight Monitor Mounting System
• For Additional Pro Ultra Monitor Arm
• Anodised Aluminum

• Strong and lightweight aluminium frame
• Frame is removable and collapses for transport
• Constructed of water repellent 400 Denier Corder fabric
• Comes with an optional front door for ultra darkness
• Attaches securley to the DigiPlate Pro in seconds

• Works with all generations of aluminium iMacs and Cinema Displays
• Custom pads ensure a strong grip
• Pads also protect surface of iMac or Display
• Anodised Black
• Not compatible with the DigiPlate Lite

• Brand new design
• Travel friendly but strong
• Anodised Orange 100 x 100 plate
• Freely rotate the monitor or easily lock it in a vertical or horizontal position

• Attach/Remove VESA Monitors in Seconds
• Monitor and Receiver VESA Plates
• vDrop Quick-Release Dovetail Mount
• 100 x 100 and 75 x 75 VESA Standards

• Includes additional QR receiver
• Attach or remove Monitors in Seconds
• vDrop Quick-Release Dovetail Mount
• Compatible with 5/8" Baby Pin Connectors
• 100 x 100 and 75 x 75 VESA Standards

• Handhold Two Director's Monitors
• Two Director's Monitor Cage v3 Kits
• Adapters to Mount Side by Side
• Carbon Fibre Handgrips and Rods
• Swing-Away Access, Neck Strap

• Handle Adapters
• C Stand Adapter
• 5/32 allen wrench

• Mount Monitor on Canon C70 Camera
• 1/4"-20 Monitor Screw & Anti-Twist Pins
• 1/4"-20 Screw with Thumbwheel Mount
• Hinge Tilts 180°
• Rubber Pad to Protect Monitor
• Compatible with Canon Accessory Mount

• For Director's Monitor Cage v3
• Bottom Component of Cage
• 1/4"-20 and 3/8"-16 Mounting Threads
• 2 x 15mm Rod Clamps
• Baby Pin Receiver with Thumbscrew
• Passive Holes for Odyssey 7Q Monitors

• Mounts onto Canon C70 Camera Mount
• Designed to Fit Smart 5 Locating Pins
• 1/4"-20 Monitor Screw Mount
• 180° Tilting
• Detachable 15mm Rod Clamp Hinge
• Rubber Pad to Fit 3rd Party Monitors

• Mounts onto Arca-Type Mount
• Designed to Fit Smart 5 Locating Pins
• 1/4"-20 Monitor Screw Mount
• 180° Tilting
• Detachable 15mm Rod Clamp Hinge
• Rubber Pad to Fit 3rd Party Monitors

• Mounts onto 3/8"-16 Anti-Twist Thread
• Designed to Fit Smart 5 Locating Pins
• 1/4"-20 Monitor Screw Mount
• 180° Tilting
• Detachable 15mm Rod Clamp Hinge
• Rubber Pad to Fit 3rd Party Monitors

• Mount Smart 5 Monitor on Rod System
• Designed to Fit Smart 5 Locating Pins
• 1/4"-20 Monitor Screw Mount
• 15mm Rod Clamp
• Rubber Pad to Fit 3rd Party Monitors

• 7" 1280 x 800 IPS LCD Display
• 800:1 Contrast Ratio
• HDMI, Component, SDI, Composite Inputs
• HDMI Loop Output
• Peaking, False Colour, Histogram

• 7" 1024x600 LCD Display
• HDMI, Component, & Composite Inputs
• HD and SD Resolution Support
• 250cd/m² Brightness
• 800:1 Contrast Ratio

• 7" 1024x600 LCD Display
• SDI, HDMI, Component, & Composite Inputs
• HD and SD Resolution Support
• 250cd/m² Brightness
• 800:1 Contrast Ratio

• 7" 1024 x 600 TFT LED Backlit Display
• 800:1 Contrast Ratio
• HDMI, Component, Composite Inputs
• HDMI & Composite Output
• Peaking, False Colour, Histogram

• 7" 800 x 480 Display
• HDMI, YPbPr, Composite Inputs
• Built-In Battery
• 140° Horizontal Viewing Angle
• Includes Ball Mount and Sun Hood

• Up to 100 x 100mm VESA Compliance
• VESA to 5/8" Receptacle
• Supports up to 15 kg
• One Each 1/4"-20 & 3/8"-16 Threads

• Up to 200 x 200mm VESA Compliance
• For Use with VESA to 5/8" Receptacle
• Supports up to 66 Pounds
• One Each 1/4"-20 & 3/8"-16 Threads

• 8 x 2" TFT LCD Display
• 640 x 240 Resolution
• 4:3 Aspect Ratio
• 300:1 Contrast Ratio
• 80° Viewing Angle

• 15.6" Display 3840 x 2160
• 16:9 Aspect Ratio
• 1000:1 Contrast Ratio
• Supports NTSC/PAL & HD
• SDI, HDMI, VGA & DVI Inputs

• Protective, Formfitting Monitor Cage
• 1/4"-20 Threads on Top & Bottom
• HDMI Clamp Secures Cable
• Slots for Optional Sun Hood
• Monitor Secures with 2 x 1/4"-20 Screws
• Durable Aluminium Construction