Tripod Head Accessories
Sachtler DV75 Pan Bar for FSB Fluid Heads
- For FSB and Cine DSLR Fluid Heads
In stock
Ships in 1 - 2 working days
You Pay:
$259.00
Kessler 100mm Ball Kit
100mm Ball Kit with a 3/8" stud
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$229.00
Kessler 100mm - 75mm Bowl Adapter
Converts 100mm bowl into a 75mm bowl.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
Miller CX6 Fluid Head
- Supports 0 to 26.4 lb
- 75mm Ball Base
- 16-Step Counterbalance (15+0)
- 3-Step Pan/Tilt Drag + Zero
- Sliding Sideload Plate
Usually ships in 2 - 3 weeks
You Pay:
$3,099.00
Miller CX8 Fluid Head
- Supports 0 to 26.4 lb
- 75mm Ball Base
- 16-Step Counterbalance (15+0)
- 5-Step Pan/Tilt Drag + Zero
- Sliding Sideload Plate
Usually ships in 2 - 3 weeks
You Pay:
$3,949.00
Manfrotto 120-38 Tripod Spacer for Tripod Columns
- For 3263 Deluxe Geared Head
- Permits 90 Degree Head Tilt
- Compatible with Most Columns
- Can be Used as 3/8" F to 3/8" M Adapter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$94.95
Miller 1278 Versa Baseplate Assembly
- For CompassX & ArtX Fluid Heads
- Versa 1201 Quick Release Plate
- Side-Loading Baseplate
- 4.1" Sliding Travel Range
- Nonslip Pads, Spare Camera Screws
Usually ships in 2 - 3 weeks
You Pay:
$489.00
Miller 1288 D75 Claw Ball Level
- For Miller ArtX Fluid Heads
- 75mm Bowl to Flat Base Adapter
- M5 & 3/8"-16 Mounting Screws
- Tie-Down Knob Included
Usually ships in 2 - 3 weeks
You Pay:
$319.00
Manfrotto Cross Arm - 131DD Double End with Double Head Support
Double End with Double Head Support
Usually ships in 2 - 3 weeks
You Pay:
$359.00
Miller DS-10 Fluid Head (75mm Ball Base)
- Supports 11 lbs
- Selectable Counterbalance
- Fluid Drag System with Friction Boost
Usually ships in 2 - 3 weeks
You Pay:
$1,529.00
Miller Air Accessory Mounting Block
- Attaches on the Side of Air Fluid Head
- Supports 1/4" Accessories up to 3.3 lb
Usually ships in 2 - 3 weeks
You Pay:
$82.95
Wooden Camera Tripod Head Pan Bar to ARRI Rosette
- Clamps onto any pan bar
- 3.81 in diameter
- ARRI Standard rosette
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$309.00
Wooden Camera Plate for Touch and Go System
- For Touch and Go System
- Two 3/8"-16 Screws
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$199.00
Wooden Camera Mini Touch-and-Go System (80mm OConnor Euro, Sachtler 16, Ronford Baker Mini-RBQ)
- Mini Touch-and-Go Plate and Receiver
- Plate Fits into Recessed Receiver Slot
- 1/4"-20 and 3/8"-16 Mounting Screws
- Fits 80mm OConnor Euro, Sachtler 16
- Fits Ronford Baker Mini RBQ Plate
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$799.00
You Pay:
$109.00
Manfrotto Short Hi Hat Locking Handle (319SH)
- Short locking handle ideal for ground level shooting
- Made in rubber/aluminum for pro-high durability use
- Universal 3/8 screw for head attachment
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Manfrotto 325N - Bowl Adapter Kit
Connects a 75mm or 100 mm half bowl video head to a flat base tripod.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$219.00
Sachtler 3270 Telescopic Pan Handle (Right)
- Right Sided Telescopic Pan Handle
- For Various Sachtler Fluid Heads
Usually ships in 8 - 12 weeks
You Pay:
$959.00
Sachtler 3271 Telescopic Pan Handle (Left)
- Left Sided Telescopic Pan Handle
- For Various Fluid Sachtler Heads
Usually ships in 8 - 12 weeks
You Pay:
$959.00
Miller 378 75mm Ball Base Head to 100mm Bowl Adapter
- Mount 75mm ball levelling heads onto 100mm ball tripods
- Accepts all 75mm heads: DS5, DS10 and DS20, and Compass heads
Usually ships in 2 - 3 weeks
You Pay:
$269.00
Miller ArtX 100 Versa Starter Kit
- For ArtX Naked Fluid Heads
- Versa Baseplate Assembly
- D100 Claw Ball Adapter
- 15.4" Fixed Pan Handle
- Versa 1201 Quick Release Plate
Usually ships in 2 - 3 weeks
You Pay:
$1,489.00
Miller ArtX 100 Miller Starter Kit
- For ArtX Naked Fluid Heads
- Baseplate Assembly, 1205 Camera Plate
- D100 Claw Ball Adapter
- 15.4" Fixed Pan Handle
Usually ships in 2 - 3 weeks
You Pay:
$1,449.00
Miller Hard Transport Case for Cineline 70 Head
- The robust and ergonomic design
- Heavy-duty metal case
- Fast and secure storage of the Cineline or Skyline
- Fitted with high density foam
- Well-designed cut-outs and sturdy alloy exterior walls
Usually ships in 2 - 3 weeks
You Pay:
$3,099.00
Miller 465 Hi Hat with 75mm Bowl- Supports up to 33 lb (15 kg)
- Bolts to any flat surface
- Can be permanently mounted
- Accommodates 75mm ball levelling heads
Usually ships in 2 - 3 weeks
You Pay:
$879.00
Miller 466 Hi Hat with 100mm Bowl
- Supports Up to 55 lb (25 kg)
- Bolts into Board or Other Surface
Usually ships in 2 - 3 weeks
You Pay:
$879.00
Miller 255 Hi-Hat with 150mm Bowl
- Mount video fluid head
- Less shakes at an extremely low camera angle
- Available in a variety of different sizes
Usually ships in 2 - 3 weeks
You Pay:
$1,329.00
Miller 1/4"-20 Screw & Location Pin Adapter
- Inserts into Miller Camera Plates from the Bottom
Usually ships in 2 - 3 weeks
You Pay:
$51.95
Manfrotto 500HLV Pan Bar Handle for Select Video Heads
- For MVH500A, MVH500AH Heads
- 32 cm Length
- Aluminium-Alloy Pan Bar
- Rubberised Handle
- Right- or Left-Handed Use
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$68.95
Manfrotto 501HLV Pan Handle
- Fits 501HDV Pro Video Head
- Replacement or spare handle
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Manfrotto 501LVN - Extra Pan Handle
- For 3433/501 Video Fluid Head
- Replaces 3433HK
Special Order
Contact us for an ETA
You Pay:
$76.95
Manfrotto 502HLV Pan Bar for Select Video Heads
- For 502, 504, 509, & 526 Video Heads
- PVC-Free Aluminium Construction
Special Order
Usually ships in 3 - 4 weeks
You Pay:
$129.00
Manfrotto 503LV Pan Handle
- For 3460/503 Video Fluid Head
- Replaces 3460HK
- 330-580 mm Adjustable Length
Special Order
Contact us for an ETA
You Pay:
$129.00
Manfrotto 519LV Pan Handle
- For 519 Pro and 501HDV Pro Heads
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$139.00
You Pay:
$169.00
Manfrotto 520BALL SH 75mm half ball
Mounts all Manfrotto flat-base heads to any 75mm bowl tripod.
Special Order
Contact us for an ETA
You Pay:
$188.00
Wooden Camera Mini Touch-and-Go Receiver (80mm OConnor Euro, Sachtler 16, Ronford Baker Mini-RBQ)
- Mini Touch-and-Go Receiver Only
- Fits 80mm OConnor Euro, Sachtler 16
- Also Fits Ronford Baker Mini RBQ Plate
- Part of Mini Touch-and-Go System
- Plate Fits into Recessed Receiver Slot
Usually ships in 3 - 4 weeks
You Pay:
$649.00
Wooden Camera Mini Touch-and-Go Plate (80mm OConnor Euro, Sachtler 16, Ronford Baker Mini-RBQ)
- Mini Touch-and-Go Plate Only
- Part of Mini Touch-and-Go System
- Plate Fits into Recessed Receiver Slot
- 1/4"-20 and 3/8"-16 Mounting Screws
- Same 80mm OConnor Euro, Sachtler 16 Size
Usually ships in 3 - 4 weeks
You Pay:
$189.00
Miller 681 Pan Bar Handle for Select Video Heads
- Durable Black Alloy Tubing
- Comfortable Rubber Pan Handle Grip
Usually ships in 2 - 3 weeks
You Pay:
$269.00
Leofoto AM-1 Versa Arm
- Adapts accessories to Leofoto tripods
- Length: 112mm
- Weight: 53g
- Max. Load: 1.5kg
In Stock with Supplier
Usually ships in 3 - 4 working days
You Pay:
$47.95
Leofoto AM-1L Versa Arm
- Adapts accessories to Leofoto tripods
- Length: 190mm
- Weight: 98g
- Max. Load: 1.5kg
In Stock with Supplier
Usually ships in 3 - 4 working days
You Pay:
$67.95
Leofoto AM-2 Versa Arm
- Adapts accessories to Leofoto tripods
- Length: 127mm
- Weight: 86g
- Max. Load: 2kg
In Stock with Supplier
Usually ships in 3 - 4 working days
You Pay:
$49.95
Leofoto AM-2L Versa Arm
- Adapts accessories to Leofoto tripods
- Length: 215mm
- Weight: 162g
- Max. Load: 2kg
In Stock with Supplier
Usually ships in 3 - 4 working days
You Pay:
$70.95
Benro BA1075 100mm to 75mm Bowl Adapter Ring
Adapts 100mm Bowl to 75mm Bowl, Allows Use of 75mm Ball Heads
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$129.00
Benro 100HB 100mm Half Ball Adapter
For 3/8"-16 Flat Base Tripod Heads
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$109.00
Benro 75mm Half Ball Adapter
- Adapts Flat-Based Equipment.
- Short Tie-Down Thread.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$84.00
Blackmagic Design Tripod Mount for Studio 4K Camera (15mm LWS)
- For Studio 4K Cameras
- For URSA Mini/Broadcast Cameras
- Integrated 15mm LWS Rod Clamps
- Sliding Dovetail & Baseplate System
In Stock with Supplier
Usually ships in 3 - 5 working days
You Pay:
$249.00
Sunwayfoto Boss Adaptor Female to Male for Select Manfrotto Ball Heads
- Enables easy replacement of clamp
- Specifically designed for Manfrotto heads
- Includes 6mm screw and hex wrench
- Enhances photography capabilities
- Allows users to capture breathtaking shots
- Elevates your photography gear
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$25.95
Benro BS02 Pan Bar Handle
- For Benro H8 and H10 Video Tripod Heads
- Telescoping Design for Adjustable Length
Usually ships in 2 - 3 weeks
You Pay:
$72.95
Benro BS03 Pan Bar Handle for S2 and S4 Video Heads
- For Benro S2 and S4 Video Heads
- 30cm Length
- Aluminium-Alloy Pan Bar
- Rubberised Handle
- Magnesium-Alloy Clamp
- Steel Bolt
Usually ships in 2 - 3 weeks
You Pay:
$47.95
You Pay:
$247.00