Signal Processing & Distribution

• SDI to HDMI Conversion
• Lossless Image Conversion
• 3G (Level A&B) /HD/ SD SDI
• HDCP Support

• Routes SDI Signals to HDMI Monitors
• Outputs 30-Bit Deep Colour RGB Signal
• Passes 8 of 16 SDI Audio Ch to HDMI Out
• 0 to 7 Frame Synchronisation Audio Delay
• 2-Ch RCA Analogue Audio Output

• HDMI & 3G-SDI Input, 3.5mm Audio Input
• Converts HDMI to SDI & SDI to HDMI
• Upscales/Downscales, Converts Frame Rate
• 1 x HDMI & 2 x SDI Outputs
• DIP Switches Set Conversion Modes

• Dante AV Ultra Signals up to UHD 4K
• 1 x 12G-SDI and 1 x HDMI 2.0 Input
• Gigabit Ethernet Ports, PoE+
• HDCP 2.2 Support, RS-422 Serial Control
• 2 x USB-A Ports, Mini-USB Host Port
• 1 x 3.5mm IR Input, 1 x 3.5mm IR Output

• 80 Seconds of the Highest Quality License & Revenue-Protecting Delay

• SD/HD/3G SDI to HDMI/VGA/AV (CVBS)
• Frame Rate/Resolution Conversion

• Easy-to-use remote control
• Switch devices at the touch of a button
• Supports HDTV resolutions from 480i to 1080p
• PC resolutions from 640 x 480 to 1920 x 1200
• Dolby Digital TrueHD and DTS-HD audio

• Dante AV Ultra Signals up to UHD 4K
• 1 x 12G-SDI and 1 x HDMI 2.0 Output
• Gigabit Ethernet Ports, PoE+
• HDCP 2.2 Support, RS-422 Serial Control
• 2 x USB-A Ports, Mini-USB Host Port
• 1 x 3.5mm IR Input, 1 x 3.5mm IR Output

• 8-bit, or 12-bit high resolution ADC, restoring the waveform detail fully
• 40M record length, and 75,000 wfms/s waveform refresh rate
• Low background noise, vertical sensitivity in 1 mV/div - 10 V/div
• Multi-trigger, and bus decoding function

• HDMI Input
• Dual 3G/HD/SD-SDI Outputs
• Up to 1080p60 Resolution Input/Output
• 48 kHz Audio Sample Rate

• Compliant with Fiber/SDI SMPTE 297M-2006
• Single-Mode Fiber Duplex Transmission
• I2C Bus Interface
• Up to 20km Transmission Distance
• Non-MSA Pinout
• Compatible with SFP MSA and SFF-8472

Compliant with Fibre/SDI SMPTE 297M-2006 Single-Mode Fibre Duplex Transmission I2C Bus Interface Up to 20 kg Transmission Distance Non-MSA Pinout Compatible with SFP MSA and SFF-8472

• 4x HDMI Inputs and Outputs
• USB Memory Port
• Audio Input/Output
• Remote Control

• HDMI to SDI Conversion
• Lossless Image Conversion
• 3G (Level A&B) /HD/ SD SDI
• HDCP Support
• VC-1 RCS, PC/MAC Control Application
• Channels for Embedded/De-Embedded Audio

• HDCP Support
• Built-in Frame Synchronizer and Scaler
• Audio Embedding or De-Embedding
• VC-1 RCS, PC/MAC Control Application
• 3G (Level A&B) /HD/ SD SDI
• HDMI In/Out, RGB/Component In

• 4 In 2 Out Matrix Switcher
• HDMI
• Audio Input/Output
• Sample Rate of 48 kHz, 24 bits

• Convert an HDMI 2.0 input with up to 8-Channels of audio
• Analyzes HDR Infoframe data
• Transmits two DA 12G-SDI signals on each SDI output
• Single channel Fiber 12G LC transmitter
• FiberLC-1T-12G SFP installed

• Converts HDMI 2.0 to 12G-SDI, up to 4K 60p
• Supports up to 60p input at 4:2:2/4:4:4/4:2:0
• Supports 2SI 4K/UltraHD SDI mapping
• Two 12G-SDI outputs
• Configure via USB port and supplied Mini-Config software

• Convert 12G-SDI to HDMI 2.0b at up to 4K 60p
• HDR support for HDR10 and HLG
• Fiber LC single channel SFP transceiver
• 12G-SDI loop out

• Convert 12G-SDI to HDMI 2.0b at up to 4K 60p
• HDR support for HDR10 and HLG
• Fiber LC outputs
• 12G-SDI loop out

• Convert 12G-SDI to HDMI 2.0b at up to 4K 60p
• HDR support for HDR10 and HLG
• Embedded audio support
• 12G-SDI loop out
• Fiber SFP models available

• For all KUMO Routers
• Intuitive Push-Button Interface
• No Computer Required
• Connects to LAN via Ethernet

• Converts Between SDI Standards
• Multi-Link to Single-Link and Vice Versa
• Supports up to DCI 4K Resolution
• Re-Clocks and Amplifies

• Auto-Sensing Input
• Six Separately Buffered Outputs
• Reclocking & Equalisation
• Universal Power Supply Included

• Outputs HDMI Signals to SDI Devices
• Supports Up to 1080p/60 4:2:2 10-Bit
• Supports 8 Ch of HDMI Embedded Audio
• Embeds RCA Audio on SDI Output
• Up to 98 ft HDMI Runs

• SDI Input / SC Fibre Output / SDI Loop
• Up to 1080p Resolution
• Equalised and Reclocked Input
• ASI Compatible
• Meets All Relevant SMPTE Specifications

• Single SC Fibre Input / Dual SDI Output
• Up to 1080p Resolution
• Equalised and Reclocked Input
• ASI Compatible
• Meets All Relevant SMPTE Specifications

• SDI Input / ST Fibre Output / SDI Loop
• Up to 1080p Resolution
• Equalised and Reclocked Input
• ASI Compatible
• Meets All Relevant SMPTE Specifications

• Single ST Fibre Input / Dual SDI Output
• Up to 1080p Resolution
• Equalised and Reclocked Input
• ASI Compatible
• Meets All Relevant SMPTE Specifications

• Universal 100-240V, 50/60Hz power input
• Twelve separate +5V DC regulated outputs
• Mounting slots

• Convert DisplayPort Signals to SDI
• Select Region of Interest
• Assign Scaling, Aspect Ratio, Frame-Rate
• 2-Channel 3.5mm Separate Audio Input
• 8-Channel DisplayPort Embedded Audio

• For Vertex2/Diva/VRRoom
• Remotely change input
• Turn ON/OFF OSD
• Reboot your HDfury device

• Certified Hardware with NDI CORE Pro
• Server Supports up to 32 NDI I/O
• Full NDI and NDI|HX Support
• Supports Horizontal and Vertical Video
• HD and UHD 4K at up to 60p
• Cross-Point and I/O Panel Compatibility

• Power Supply Module for 3RU Rackmount

• Non-Multicast Multiplex Distribution
• Seamless Switching, More Professional
• Up to 16 Channels of NDI Input and 32 Output
• Compatible with NDI Signals of Any Formats/Devices
• Visualized One-Button Operation
• Customisable Control Panel

• Convert 3G-SDI to NDI & NDI|HX 2/3
• Convert NDI & NDI|HX 2/3 to 3G-SDI
• Resolutions up to 1080p60
• Large Preview/Programme Tally Display
• Low-Latency Switching, Web-Based GUI
• Embedded & 3.5mm Audio In/Out